04.70.00 – Manufactured Masonry

Tenon Masonry Veneer Joint Grout

Tenon® Masonry Veneer Joint Grout

Tenon® Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and dried sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Tenon Pro Veneer Technology (PVT) creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466).

Tenon® Masonry Veneer Mortar HB

Tenon® Masonry Veneer Mortar HB (High Bond) (BOM #120462) is a high-performance, non-sag, fiber-reinforced, polymer-modified bonding mortar for installing real or manufactured masonry veneer units. Our Pro Veneer Technology (PVT) is a blend of cementitious materials, oven-dried sand, and special performance admixtures to create a professional strength mortar. This high-yield mortar allows for the same coverage as a traditional 50 lb. bag in a lighter-weight 40 lb. size. Meets or exceeds the requirements of ANSI A118.4, A118.11, A118.15 and ASTM C270.

Tenon Masonry Veener Mortar PM

Tenon® Masonry Veneer Mortar PM

Tenon® Masonry Veneer Mortar PM (Polymer-Modified) (BOM #120461) is a high-performance, multi-purpose, polymer-modified mortar, used for both traditional thick bed scratch and base coats and as the bonding mortar for installing real or manufactured masonry veneer units. A blend of cementitious materials, oven-dried sand, and special performance admixtures, our Pro Veneer Technology (PVT) creates both a mechanical and chemical bond to the substrate, significantly outperforming standard Type S and N mortars. Can also be used for grouting, yet is excellent for applications such as dry stack where mortar joints are not used. Meets the requirements of ASTM C 1714, ASTM C270, ANSI 118.4, and ACI 530 Shear Bond Standards.