Restoration & Sealing
-
Akona® Concrete Cure & Seal
Akona Concrete Cure & Seal is a clear, non-yellowing, waterborne, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly placed and/or existing concrete, pavers, brick, stone, and other cementitious materials. Concrete Cure & Seal is formulated to cure, seal, protect, and dustproof. Designed for both exterior and interior applications. The white solution dries clear and provides a dust-free surface. Concrete Cure & Seal provides maximum hardness to the concrete as well as resistance to traffic abrasion when applied to freshly placed concrete. Construction debris is easier to remove. It is compatible with most tile and carpet adhesives. On existing driveways, sidewalks, garage floors it provides protection from water penetration, salts, grease, etc. Available in a 1 gallon bottle (BOM #121281).
-
Quikrete® Re-Cap Concrete Resurfacer
Quikrete® Re-Cap™ Concrete Resurfacer (BOM #112421) is a special blend of portland cement, sand, polymer modifiers and other additives. Designed to provide a shrinkage compensated repair material for making thin repairs to sound concrete in need of surface renewal. Can be squeegee, trowel or brush applied.
-
Tenon® Concrete & Masonry Sealer WB
Tenon® Concrete & Masonry Sealer WB is a water-based sealer that penetrates and reacts chemically within the capillaries of the concrete or masonry, bonding to the silica in the substrate to protect against moisture penetration, water-related staining, atmospheric chemicals, and deterioration. It is used to protect and seal clean, dry, coating-free, fully-cured concrete, brick masonry, concrete masonry units, stucco, stone terrazzo, architectural concrete, and some natural stones. For above-grade exterior applications that are not subject to hydrostatic pressure. Ready-to-use, this low VOC, silane/siloxane emulsion is especially suited for applications where VOC regulations for AIM coatings prevent the use of solvent-borne products. Available in 1 gallon bottles (BOM #120673) and 5 gallon pails (BOM #120674).
-
Sakrete® Cure ‘N Seal (WB)
Sakrete® Cure 'N Seal (WB) (BOM #120045) is a clear, non-yellowing, waterborne, acrylic polymer modified resin compound used for curing, sealing, and hardening freshly placed concrete. Also used to seal, protect, and dustproof existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.
-
Tenon® Cure & Seal WB
Tenon® Cure & Seal WB is a clear, non-yellowing, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Waterborne mixture passes VOC compliance laws. Available in 1 gal. bottle (BOM #120823), 5 gal. pail (BOM #120822), and 55 gal. drum (BOM #120824).
-
Quikrete® Polyurethane Non-Sag Sealant
Quikrete® Polyurethane Non-Sag Sealant (BOM #102351) is a high-performance, construction-grade polyurethane sealant designed for vertical and overhead surfaces. The non-sag formula provides superior adhesion and flexibility and is ideal for filling and sealing cracks and expansion joints in concrete, stucco, or masonry or for sealing around window and door openings. Meets ASTM C 920, Type S, Grade NS.
-
Quikrete® Polyurethane Self-Leveling Sealant
Quikrete® Polyurethane Self-Leveling Sealant (BOM #102352) is a high-performance, construction-grade, polyurethane sealant used for sealing cracks and joints in horizontal concrete surfaces. This self-leveling formula provides superior adhesion, flexibility and durability and is ideal for sealing expansion joints and crack in concrete floors, driveways, patios, steps, basements, and pool decks. Meets ASTM C 920 Type S, Grade P, Class 25.
-
Akonaseal® Masonry/Joint Sealant
Akonaseal® Masonry/Joint Sealant (BOM #104561) has an updated package and name (previously called Construction Textured Sealant). A premium-grade, multi-purpose, moisture-cure sealant, designed to meet the flexibility requirements of dynamically moving cracks and joints, this texturized, gray mortar-colored sealant is ideally suited for vertical concrete, stucco or masonry applications with a maximum joint of 1½"W x ½"D and can be painted with a latex paint when cured. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant.
-
SAKRETE® Polyurethane Non-Sag Sealant
Sakrete® Polyurethane Non-Sag Sealant (BOM#121095) is a one-component sealant that forms a flexible joint with excellent adhesion for horizontal or vertical applications.
-
SAKRETE® Polyurethane Self-Leveling Sealant
Sakrete® Polyurethane Self-Leveling Sealant (BOM#121097) is a one-component, self-leveling sealant for filling cracks or joints in horizontal applications.
-
TechPro® Stone Veneer Sealant
TechPro® Stone Veneer Sealant is a one-component, high-performance, non-priming, gun-grade, polyurethane elastomeric sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry. Available in 5 colors to coordinate with TechPro Stone Veneer Grout: Gray (BOM #120450); Brown (BOM #120453); Tan (BOM #120452), White (BOM #120451); and Charcoal (BOM #130100)