Mortars

  • Akona Concrete & Mortar Color

    Akona® Concrete & Mortar Color

    Akona® Concrete & Mortar Colors give you a simple way to color your concrete, masonry, or grout project. Made of synthetic mineral oxide, these color additives will provide a durable, alkali– and ultraviolet-resistant finish to any cementitious application. Just add one canister to a bag of concrete, mortar, or grout mix to give your project a more decorative look. Great for use with TechMix® Premium Countertop Mix! Available in Charcoal, Terracotta, Brick Red, Buff, and Brown.

  • Quikrete® FastSet Repair Mortar

    FastSet™ Repair Mortar demonstrates low sag, making it ideal for vertical or overhead repairs. FastSet™ Repair Mortar is also available with integral corrosion inhibitor in cases where maximum corrosion protection is desired. The addition of corrosion inhibitor has no adverse effect on the other physical properties of the product. This product can be built up […]

  • Spec Mix® Building Stone Mortar

    Spec Mix® Building Stone Mortar is specially designed for masonry building masonry walls with full depth stone units. Whether the specification calls for soft or hard stone, Building Stone mortar mix is engineered to match the specific properties of each stone to increase the mortar-to-stone bond strength while allowing the mason to lay more stone […]

  • Spec Mix Mortar

    Spec Mix® Mortar

    Spec Mix® Portland Lime & Sand Mortar is a dry, preblended mortar mix containing Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #101212), Type S (BOM #101013), Type M (BOM #101320), and Type O (BOM #107500). PCL Sand is also available with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags Type N (BOM #100316), Type S (BOM #101455), Type M (BOM #101456), and Type O (BOM #109618) to work with our silo system. Please contact your salesperson for more information.

    For jobsites with air-quality concerns, consider our LOW-DUST Mortar Option.  For more information, please contact your salesperson for location availability and pricing.

  • Spec Mix Mortar - Colored

    Spec Mix® Mortar – Colored

    Spec Mix® Portland Lime & Sand with Color is a dry, preblended mortar mix containing Portland cement, hydrated lime, dried masonry sand and color pigment formulated for superior bond, workability and board life. This product meets ASTM C270 and ASTM C1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar with color in Type N, Type S, and Type M. PCL Sand with color is also available with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information. **For best results, TCC Materials recommends the use of 2% color o greater in our premixed cementitious mixes due to the potential of color inconsistencies which can occur when using mixes with 1%. The small amount of pigment in the mixes with less than 2% color can be greatly affected by raw cement color, field conditions, and type of masonry unit being laid.**

  • Spec Mix Mortar

    Spec Mix® Mortar – White

    Spec Mix® Portland Lime & Sand White Mortar is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #106425), Type S (BOM #106257), and Type O (BOM #108645). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Spec Mix Mortar w/ Integral Water Repellent

    Spec Mix® Mortar w/ Integral Water Repellent

    Spec Mix® IWR (Integral Water Repellent) Mortar is a dry, preblended mortar mix containing Portland cement and hydrated lime, mortar cement or masonry cement with dried masonry sand and water repellant admixture formulated for water repellency, superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. Spec Mix® IWR (Integral Water Repellent) Mortar is available in Type N, S, and M and can also be ordered with integral color. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Spec Mix Mortar

    Spec Mix® Mortar (w/ Silica Sand) – White

    Spec Mix® Portland Lime & Sand White Mortar w/ Silica Sand is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried silica sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #107615), Type S (BOM #107134), and Type O (BOM #109740). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR). Also available in 3,000 lb. (BOM #107138) bulk bags Type N (BOM #106413), and Type S (BOM #105376) to work with our silo system. Please contact your salesperson for more information.

  • Quikrete® FastSet Repair Mortar

    Quikrete® FastSet Repair Mortar (BOM #109719) is specifically formulated to make structural repairs to any concrete, masonry or stucco surface. This low-sag formula has a 20-30 minute working time which allows for sculpting of the material during placement and makes it ideal for vertical and overhead repairs. Just add water, mix, and use to repair concrete, masonry, or stucco surfaces. Exceeds ASTM C 928 R-2. Compressive strength ASTM C109 modified: 3 hours=2,000 psi, 24 hours = 4,000 psi, 7 days = 5,000 psi, and 28 days = 6,000 psi.

  • TCC Materials® Stone Mortar Mix

    TCC Materials® Stone Mortar Mix (BOM #109043) is a specially formulated product for use in applying precast masonry veneer, thin natural stone veneer or thin brick units to base surfaces. This versatile product may be used as an initial base coat for your project, then can be used in applying masonry veneer to the substrate. The material is factory blended to ensure bond strength, workability and consistency. To mix, just add water. Follow the stone installation instructions provided by the manufacturer. Available in a 60 lb. (27.2 kg) bag.

  • Spec Mix Polymer-Modified Adhered Veneer Mortar

    Spec Mix® Polymer-Modified Adhered Veneer Mortar (PMAVM)

    Spec Mix® Polymer Modified Adhered Veneer Mortar (PMAVM) (BOM #103592) is a blend of dry cementitious materials, masonry sand and performance admixtures specifically designed to provide superior bond for adhered manufactured and natural thin stone as well as brick veneer units. PMAVM is designed to provide excellent workability, cohesion, high bond strength, sag resistance, water resistance, efflorescence minimization, and durability. This product meets the requirements of ASTM C 270 and ASTM C 1714 for Type S mortars including ANSI A118.4 and ACI 530 shear bond standards. TCC Materials also offers PMAVM with integral color. Also available in 3,000 lb. (BOM #103593) bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Quikrete® Glass Block Mortar

    Quikrete® Glass Block Mortar (BOM #100710) is a specifically formulated blend of white sand, cement, lime and other waterproof additives designed to provide a decorative, waterproof joint. Exceeds the performance requirements of ASTM C270 for Type S Mortar. Just add water.

  • Quikrete® Mason Mix

    Quikrete® Mason Mix (BOM #106514) is a high strength Commercial Grade dry pre-blended mixture of sand and cements specially selected for masonry applications. Meets N, S, M requirements as specified in ASTM C270. Just add water. Also available in a 60 lb. bag (BOM #105673) at some locations.

  • Spec Mix Set Accelerated Mortar

    Spec Mix® Set Accelerated Mortar

    Spec Mix® Set Accelerated Mortar is a dry preblended mortar mix containing Portland cement, hydrated lime or masonry Cement or mortar cement, dried masonry sand, and set accelerating admixtures formulated for faster set times in cold weather while maintaining superior bond, water retention and board life. This product meets ASTM C 270, ASTM C 1384 and ASTM C 1714 requirements. TCC Materials offers Set Accelerated Mortar in Type S (BOM #103757). Other types are available upon request. Also available in 3,000 lb. (BOM #112328) bulk bags to work with our silo system. Please contact your salesperson for more information.

  • TechMix Masonry Cement

    TechMix® Masonry Cement

    Tech Mix® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #100920) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM #100917) is designed for structural above-grade or below-grade application and comes in a 75 lb. bag. Type M Masonry Cement (BOM #100868) is used for structural, below-grade, load-bearing walls where higher compressive strengths are needed and comes in a 70 lb. bag.

  • Quikrete® Mortar Mix – Type N

    Quikrete® Mortar Mix (BOM #100533) is a blend of masonry cement and graded sand, designed to meet ASTM C 270 for Type N Mortar. Just add water and mix to construct or repair block, brick, or stone structures like walls, pillars, barbecues, planters, and for tuck-pointing mortar joints.

  • TechMix® Mortar Mix – Type N

    TechMix® Mortar Mix Type N (BOM #104881) is a blend of Portland cement, lime, and sand for laying brick, block, and stone for all types of construction.

  • Sakrete Fast Setting Cement Patcher

    Sakrete® Fast Setting Cement Patcher

    Sakrete® Fast Setting Cement Patcher is used for horizontal, vertical, and overhead repairs where an accelerated set-time is needed. Use for applications of ½ inch featheredge. Fast Setting Cement Patcher is available in a 50 lb. pail (BOM #120029), and a 10 lb. box (BOM #120028).

  • Spec Mix® Adhered Veneer Mortar

    Spec Mix® Adhered Veneer Mortar

    Spec Mix® Adhered Veneer Mortar (AVM) is a blend of dry cementitious materials and masonry sand specifically designed to provide superior bond for precast, lightweight masonry veneer units to base surfaces, and is also offered with integral color. TCC Materials offers Adhered Veneer Mortar in Type N (BOM #109302) and Type S (BOM #109454) This product meets ASTM C270 and ASTM C 1714, and CSA A 179 for Type S mortar including ACI 530 shear strength requirements. Also available in 3,000 lb. bulk bags Type N (BOM #109559) and Type S (BOM #109557) to work with our silo system. Please contact your salesperson for more information.

  • TechMix Mortar Mix - Type S

    TechMix® Mortar Mix – Type S

    TechMix® Mortar Mix Type S (BOM #104885) is a blend of Portland cement, lime, and sand for laying brick, block, and stone on either load-bearing or non-load-bearing walls. Suitable for construction below grade.

  • Spec Mix Stone Veneer Mortar - Joint Grout

    Spec Mix® Stone Veneer Mortar – Joint Grout

    Spec Mix® Stone Veneer Joint Grout (BOM #108404) is a blend of dry, cementitious materials, and masonry sand specifically designed to fill the joints between various precast, lightweight, masonry veneer systems. TCC Materials also offers SPEC MIX joint grout made with white cement and/or with integral color. Also available in 3,000 lb. (BOM #102310) bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Sakrete Fast Setting Repair Mortar

    Sakrete® Fast Setting Repair Mortar

    Sakrete® Fast Setting Repair Mortar (BOM #120371) is a fast-setting, high-strength patching material for both interior and exterior concrete surfaces. The convenient zip-pouch package is designed with the do-it-yourselfer in mind for smaller repair projects. Just add water and mix in the bag to create a workable mixture with excellent bonding characteristics. Trowel apply over existing concrete surfaces from a featheredge to 2" thickness to fix minor blemishes. Use for vertical, horizontal, and overhead repairs to pavement, curbs, steps, and more. Sakrete Repair Mortar can be shaved and sanded to shape. Sets up in 10-12 minutes.

  • Spec Mix Stone Veneer Mortar - Scratch Base

    Spec Mix® Stone Veneer Mortar – Scratch Base

    Spec Mix® Scratch & Base Mortar (BOM #108540) is a blend of dry, cementitious materials and masonry sand specifically designed for superior bond and durability. Use SPEC MIX Scratch & Base as a base coat for attaching precast, lightweight masonry units over wood and lath, concrete or masonry substrates. TCC Materials also offers Spec Mix Scratch & Base with integral color. Also available in 3,000 lb. (BOM #109009) bulk bags to work with our silo system. Please contact your salesperson for more information.

  • TechMix PCL Mortar Pro - Type N

    TechMix® PCL Mortar Pro – Type N

    TechMix® PCL Mortar Pro - Type N is a consistent, specifically-formulated blend of Portland cement, hydrated lime, and dried sand with superior bond, water retention, and board life. Used for multi-purpose interior and exterior masonry construction including laying brick, block, and stone. Type N is suitable for load-bearing, above-grade construction. Meets requirements of ASTM C270.  Available in 80# bags (BOM #111207) and 3000# bulk bags (BOM #111118). PCL Mortar Pro is also available with preblended color and/or integral water repellant. For more information, contact your sales representative.

  • TechMix PCL Mortar Pro - Type S

    TechMix® PCL Mortar Pro – Type S

    TechMix® PCL Mortar Pro - Type S is a consistent, specifically formulated blend of Portland cement, hydrated lime, and dried sand with superior bond, water retention, and board life. Used for multi-purpose interior and exterior masonry construction including laying brick, block, and stone. Type S is suitable for load-bearing construction above or below grade. Meets requirements of ASTM C270.  Available in 80# bags (BOM #111217) and 3000# bulk bags (BOM #111119). PCL Mortar Pro is also available with preblended color and/or integral water repellant. For more information, contact your sales representative.

  • Akona® Medium-Duty Refractory Mortar

    Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQ's, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.

  • Sakrete® High Heat Mortar

    Sakrete® High Heat Mortar

    Sakrete® High Heat Mortar (BOM #120996) is a dry, medium-duty mortar ideal for setting masonry units in fireplaces, fire pits, or chimney applications such as setting clay flue liners and parging a smoke chimney chamber. High heat resistance for appications up to 2550°F and excellent strength properties.

  • Akona Glass Block Mortar

    Akona® Glass Block Mortar

    Akona® Glass Block Mortar (BOM # 102627) is a specially-formulated blend of select white silica sands, white cement and workability agents which result in an easy-to-handle, high strength mortar. It is designed for installing glass block windows, shower and bath walls or masonry units where a white mortar is desired. This product is suitable for both interior and exterior applications.

  • Spec Mix Underground Utility Mortar

    Spec Mix® Underground Utility Mortar

    Spec Mix® Underground Utility Mortar (BOM #106516) is a dry, preblended, air-entrained mortar mix containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. This product meets ASTM C 270 and ASTM C 1714 requirements. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Spec Mix Underground Utility Mortar

    Spec Mix® Underground Utility Mortar (WI DOT)

    Spec Mix® Underground Utility Mortars (WI DOT) are dry, preblended mortar mixes containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. TCC Materials® Underground Utility Mortars are designed to be compatible with the characteristics of the specified precast concrete structure or brick used in manhole and catch-basin construction. They are acceptable for the jointing of all types of underground precast concrete utility construction and laying concrete brick in manholes and catch basins. They may be used above or below grade when manufactured to the appropriate specification. BOM#103725 meets WI DOT specification 518.2.3 mortar proportion specification for WI DOT Stone & Pointing Mortars and also meets ASTM C387. BOM #105223 meets WI DOT specification 519.2.3 mortar proportion specification for WI DOT Catch Basin/Manhole Mortar as well as ASTM C387. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

  • SPEC MIX® G7000 Silo System

    The SPEC MIX® G7000 silo system is the ultimate contractor tool for maximizing the production and profitability of any workforce. The G7000?s design is simple, yet highly efficient when producing dry, cement-based products on site. Whether the project is small or large, the G7000 system will greatly reduce the cost of labor and the amount […]

  • Sakrete® Mortar Mix Type N

    Sakrete® Mortar Mix Type N

    Sakrete® Mortar Mix Type N (BOM #100770) is a regular-strength, general-purpose mortar mix for laying brick, block and stone in wall construction or for repairing damaged mortar joints. Just add water, mix, and use.

  • SPEC MIX® Load-N-Go

    For mortar, colored, mortar, grout, stucco, shotcrete, utility products, or custom mixes, SPEC MIX® Load-N-Go Silo Systems is the ideal tool for increasing on-site mortar delivery versatility. Specifically designed as a low-profile, lightweight addition to the SPEC MIX silo fleet, the Load-N-Go is ideal for interior work, large residential, small commercial, or a multitude of jobsite conditions. Its two-component design allows for the contractor to use smaller forklifts with lower lifting height capacities. With the addition of the Load-N-Go ladder kit, the silo operates the same as the standard G7000 with a one-bulk bag capacity.

  • SPEC MIX D2W Workhorse

    SPEC MIX® D2W Workhorse

    NOW AVAILABLE FOR PURCHASE! The SPEC MIX® D2W Workhorse Continuous Mixing System (BOM #110384) is powered by a standard 120V circuit so you mix SPEC MIX products anywhere on site. Simply plug into a power outlet, connect to a strong and steady water source then flip on the switch and start breaking bags of SPEC MIX products for continuous, consistently mixed materials. This lightweight, highly mobile mixer puts out 1.5 yards of mix per hour or small amounts of material to complete the job. When working indoor and outdoor, floor-to-floor, large projects or small, the D2W Workhorse is the system for high productivity and profitability. The D2W Workhorse features a high speed, effective mixing action that hydrates preblended materials while entrapping the optimal workability and boardlife. The water is metered directly into the system to achieve a constant water to cement ratio that ensures superior color uniformity, bond strength and compressive strength. It’s the simple, innovative material delivery system that mixes a wide range of products with incredible consistency, is easy to use, and cleans up in a minute or less. The D2W Workhorse is a contractor’s solution for locking in quality control and improving daily production!

  • Sakrete® Mortar-Stucco Mix Type S

    Sakrete® Mortar-Stucco Mix Type S

    Sakrete® Mortar-Stucco Mix Type S is a contractor-grade mortar mix for laying brick, block, and stone in load-bearing walls and construction above or below grade level. It can also be used as a scratch and brown coat in stucco application. Just add water, mix, and use. Available in 80 lb. bag (BOM #100531) and 50 lb. pail (BOM #120023)

  • Tenon Mighty Bond - Group

    Tenon® Mighty Bond

    Tenon® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 1 gal. bottles (BOM #120525), 5 gal. pails (BOM #120526) and 55 gal. drums (BOM #130020).

  • Sakrete® Stone Veneer Mortar

    Sakrete® Stone Veneer Mortar

    Sakrete® Stone Veneer Mortar Mix (BOM #105167) is a polymer-modified contractor grade mortar specifically designed to adhere manufactured or artificial stones in vertical applications. Just add water and mix to use.

  • Tenon Masonry Veneer Joint Grout

    Tenon® Masonry Veneer Joint Grout

    Tenon® Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and dried sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Tenon Pro Veneer Technology (PVT) creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466).

  • Tenon Masonry Veener Mortar PM

    Tenon® Masonry Veneer Mortar PM

    Tenon® Masonry Veneer Mortar PM (Polymer-Modified) (BOM #120461) is a high-performance, multi-purpose, polymer-modified mortar, used for both traditional thick bed scratch and base coats and as the bonding mortar for installing real or manufactured masonry veneer units. A blend of cementitious materials, oven-dried sand, and special performance admixtures, our Pro Veneer Technology (PVT) creates both a mechanical and chemical bond to the substrate, significantly outperforming standard Type S and N mortars. Can also be used for grouting, yet is excellent for applications such as dry stack where mortar joints are not used. Meets the requirements of ASTM C 1714, ASTM C270, ANSI 118.4, and ACI 530 Shear Bond Standards.

  • Tenon® Masonry Veneer Mortar HB

    Tenon® Masonry Veneer Mortar HB (High Bond) (BOM #120462) is a high-performance, non-sag, fiber-reinforced, polymer-modified bonding mortar for installing real or manufactured masonry veneer units. Our Pro Veneer Technology (PVT) is a blend of cementitious materials, oven-dried sand, and special performance admixtures to create a professional strength mortar. This high-yield mortar allows for the same coverage as a traditional 50 lb. bag in a lighter-weight 40 lb. size. Meets or exceeds the requirements of ANSI A118.4, A118.11, A118.15 and ASTM C270.

  • Tenon Rapid Patch Vertical Repair CI

    Tenon® Vertical Repair CI

    Tenon® Vertical Repair CI (BOM# 113810) is a polymer modified, high-strength, fast-setting, non-shrink, patching material for commercial and industrial vertical and overhead holes in concrete or masonry. Can be shaved or molded to required shapes.

    Note: Also available without corrosion inhibitor (BOM# 126171).

  • Tenon Refractory Mortar Group (all 4) 2023

    Tenon® Refractory Mortar

    Tenon® Refractory Mortar is a specially-engineered blend of specific cements and aggregates giving the mortar unique heat-resistance and thermal characteristics for use in high-temperature applications such as inside fire pit rings, setting chimney clay flue liners, parging a smoke chimney chamber, and setting fire bricks. Passes ASTM C 199 for mortar temperature limits to 2,550°F for a minimum of 6 hours. 

  • Tenon Underground Utility Mortar

    Tenon® Underground Utility Mortar

    Tenon® Underground Utility Mortar 50 lb. (BOM #120704) and 80 lb. (BOM #114181) is a is a dry, preblended, air-entrained mortar mix containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. This product meets ASTM C270 and ASTM C1714 requirements.

  • Tenon® Waterproofing & Crack Isolation Membrane

    Tenon® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675) and 5 gal. (BOM #120676).