Masonry Mortars

  • Akona Concrete & Mortar Color

    Akona® Concrete & Mortar Color

    Akona® Concrete & Mortar Colors give you a simple way to color your concrete, masonry, or grout project. Made of synthetic mineral oxide, these color additives will provide a durable, alkali– and ultraviolet-resistant finish to any cementitious application. Just add one canister to a bag of concrete, mortar, or grout mix to give your project a more decorative look. Great for use with TechMix® Premium Countertop Mix! Available in Charcoal, Terracotta, Brick Red, Buff, and Brown.

  • Spec Mix Mortar

    Spec Mix® Mortar

    Spec Mix® Portland Lime & Sand Mortar is a dry, preblended mortar mix containing Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #101212), Type S (BOM #101013), Type M (BOM #101320), and Type O (BOM #107500). PCL Sand is also available with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags Type N (BOM #100316), Type S (BOM #101455), Type M (BOM #101456), and Type O (BOM #109618) to work with our silo system. Please contact your salesperson for more information.

    For jobsites with air-quality concerns, consider our LOW-DUST Mortar Option.  For more information, please contact your salesperson for location availability and pricing.

  • Spec Mix Mortar - Colored

    Spec Mix® Mortar – Colored

    Spec Mix® Portland Lime & Sand with Color is a dry, preblended mortar mix containing Portland cement, hydrated lime, dried masonry sand and color pigment formulated for superior bond, workability and board life. This product meets ASTM C270 and ASTM C1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar with color in Type N, Type S, and Type M. PCL Sand with color is also available with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information. **For best results, TCC Materials recommends the use of 2% color o greater in our premixed cementitious mixes due to the potential of color inconsistencies which can occur when using mixes with 1%. The small amount of pigment in the mixes with less than 2% color can be greatly affected by raw cement color, field conditions, and type of masonry unit being laid.**

  • Spec Mix Mortar

    Spec Mix® Mortar – White

    Spec Mix® Portland Lime & Sand White Mortar is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #106425), Type S (BOM #106257), and Type O (BOM #108645). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Spec Mix Mortar w/ Integral Water Repellent

    Spec Mix® Mortar w/ Integral Water Repellent

    Spec Mix® IWR (Integral Water Repellent) Mortar is a dry, preblended mortar mix containing Portland cement and hydrated lime, mortar cement or masonry cement with dried masonry sand and water repellant admixture formulated for water repellency, superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. Spec Mix® IWR (Integral Water Repellent) Mortar is available in Type N, S, and M and can also be ordered with integral color. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Spec Mix Mortar

    Spec Mix® Mortar (w/ Silica Sand) – White

    Spec Mix® Portland Lime & Sand White Mortar w/ Silica Sand is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried silica sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #107615), Type S (BOM #107134), and Type O (BOM #109740). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR). Also available in 3,000 lb. (BOM #107138) bulk bags Type N (BOM #106413), and Type S (BOM #105376) to work with our silo system. Please contact your salesperson for more information.

  • Quikrete® Glass Block Mortar

    Quikrete® Glass Block Mortar (BOM #100710) is a specifically formulated blend of white sand, cement, lime and other waterproof additives designed to provide a decorative, waterproof joint. Exceeds the performance requirements of ASTM C270 for Type S Mortar. Just add water.

  • Quikrete® Mason Mix

    Quikrete® Mason Mix (BOM #106514) is a high strength Commercial Grade dry pre-blended mixture of sand and cements specially selected for masonry applications. Meets N, S, M requirements as specified in ASTM C270. Just add water. Also available in a 60 lb. bag (BOM #105673) at some locations.

  • Spec Mix Set Accelerated Mortar

    Spec Mix® Set Accelerated Mortar

    Spec Mix® Set Accelerated Mortar is a dry preblended mortar mix containing Portland cement, hydrated lime or masonry Cement or mortar cement, dried masonry sand, and set accelerating admixtures formulated for faster set times in cold weather while maintaining superior bond, water retention and board life. This product meets ASTM C 270, ASTM C 1384 and ASTM C 1714 requirements. TCC Materials offers Set Accelerated Mortar in Type S (BOM #103757). Other types are available upon request. Also available in 3,000 lb. (BOM #112328) bulk bags to work with our silo system. Please contact your salesperson for more information.

  • TechMix Masonry Cement

    TechMix® Masonry Cement

    Tech Mix® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #100920) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM #100917) is designed for structural above-grade or below-grade application and comes in a 75 lb. bag. Type M Masonry Cement (BOM #100868) is used for structural, below-grade, load-bearing walls where higher compressive strengths are needed and comes in a 70 lb. bag.

  • Quikrete® Mortar Mix – Type N

    Quikrete® Mortar Mix (BOM #100533) is a blend of masonry cement and graded sand, designed to meet ASTM C 270 for Type N Mortar. Just add water and mix to construct or repair block, brick, or stone structures like walls, pillars, barbecues, planters, and for tuck-pointing mortar joints.

  • TechMix® Mortar Mix – Type N

    TechMix® Mortar Mix Type N (BOM #104881) is a blend of Portland cement, lime, and sand for laying brick, block, and stone for all types of construction.

  • TechMix Mortar Mix - Type S

    TechMix® Mortar Mix – Type S

    TechMix® Mortar Mix Type S (BOM #104885) is a blend of Portland cement, lime, and sand for laying brick, block, and stone on either load-bearing or non-load-bearing walls. Suitable for construction below grade.

  • TechMix PCL Mortar Pro - Type N

    TechMix® PCL Mortar Pro – Type N

    TechMix® PCL Mortar Pro - Type N is a consistent, specifically-formulated blend of Portland cement, hydrated lime, and dried sand with superior bond, water retention, and board life. Used for multi-purpose interior and exterior masonry construction including laying brick, block, and stone. Type N is suitable for load-bearing, above-grade construction. Meets requirements of ASTM C270.  Available in 80# bags (BOM #111207) and 3000# bulk bags (BOM #111118). PCL Mortar Pro is also available with preblended color and/or integral water repellant. For more information, contact your sales representative.

  • TechMix PCL Mortar Pro - Type S

    TechMix® PCL Mortar Pro – Type S

    TechMix® PCL Mortar Pro - Type S is a consistent, specifically formulated blend of Portland cement, hydrated lime, and dried sand with superior bond, water retention, and board life. Used for multi-purpose interior and exterior masonry construction including laying brick, block, and stone. Type S is suitable for load-bearing construction above or below grade. Meets requirements of ASTM C270.  Available in 80# bags (BOM #111217) and 3000# bulk bags (BOM #111119). PCL Mortar Pro is also available with preblended color and/or integral water repellant. For more information, contact your sales representative.

  • Akona® Medium-Duty Refractory Mortar

    Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQ's, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.

  • Sakrete® High Heat Mortar

    Sakrete® High Heat Mortar

    Sakrete® High Heat Mortar (BOM #120996) is a dry, medium-duty mortar ideal for setting masonry units in fireplaces, fire pits, or chimney applications such as setting clay flue liners and parging a smoke chimney chamber. High heat resistance for appications up to 2550°F and excellent strength properties.

  • Akona Glass Block Mortar

    Akona® Glass Block Mortar

    Akona® Glass Block Mortar (BOM # 102627) is a specially-formulated blend of select white silica sands, white cement and workability agents which result in an easy-to-handle, high strength mortar. It is designed for installing glass block windows, shower and bath walls or masonry units where a white mortar is desired. This product is suitable for both interior and exterior applications.

  • Spec Mix Underground Utility Mortar

    Spec Mix® Underground Utility Mortar

    Spec Mix® Underground Utility Mortar (BOM #106516) is a dry, preblended, air-entrained mortar mix containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. This product meets ASTM C 270 and ASTM C 1714 requirements. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Spec Mix Underground Utility Mortar

    Spec Mix® Underground Utility Mortar (WI DOT)

    Spec Mix® Underground Utility Mortars (WI DOT) are dry, preblended mortar mixes containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. TCC Materials® Underground Utility Mortars are designed to be compatible with the characteristics of the specified precast concrete structure or brick used in manhole and catch-basin construction. They are acceptable for the jointing of all types of underground precast concrete utility construction and laying concrete brick in manholes and catch basins. They may be used above or below grade when manufactured to the appropriate specification. BOM#103725 meets WI DOT specification 518.2.3 mortar proportion specification for WI DOT Stone & Pointing Mortars and also meets ASTM C387. BOM #105223 meets WI DOT specification 519.2.3 mortar proportion specification for WI DOT Catch Basin/Manhole Mortar as well as ASTM C387. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Sakrete® Mortar Mix Type N

    Sakrete® Mortar Mix Type N

    Sakrete® Mortar Mix Type N (BOM #100770) is a regular-strength, general-purpose mortar mix for laying brick, block and stone in wall construction or for repairing damaged mortar joints. Just add water, mix, and use.

  • Sakrete® Mortar-Stucco Mix Type S

    Sakrete® Mortar-Stucco Mix Type S

    Sakrete® Mortar-Stucco Mix Type S is a contractor-grade mortar mix for laying brick, block, and stone in load-bearing walls and construction above or below grade level. It can also be used as a scratch and brown coat in stucco application. Just add water, mix, and use. Available in 80 lb. bag (BOM #100531) and 50 lb. pail (BOM #120023)

  • Tenon Mighty Bond - Group

    Tenon® Mighty Bond

    Tenon® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 1 gal. bottles (BOM #120525), 5 gal. pails (BOM #120526) and 55 gal. drums (BOM #130020).

  • Tenon Refractory Mortar Group (all 4) 2023

    Tenon® Refractory Mortar

    Tenon® Refractory Mortar is a specially-engineered blend of specific cements and aggregates giving the mortar unique heat-resistance and thermal characteristics for use in high-temperature applications such as inside fire pit rings, setting chimney clay flue liners, parging a smoke chimney chamber, and setting fire bricks. Passes ASTM C 199 for mortar temperature limits to 2,550°F for a minimum of 6 hours.