DIY Concrete
-
Akona® Concrete & Mortar Color
Akona® Concrete & Mortar Colors give you a simple way to color your concrete, masonry, or grout project. Made of synthetic mineral oxide, these color additives will provide a durable, alkali– and ultraviolet-resistant finish to any cementitious application. Just add one canister to a bag of concrete, mortar, or grout mix to give your project a more decorative look. Great for use with TechMix® Premium Countertop Mix! Available in Charcoal, Terracotta, Brick Red, Buff, and Brown.
-
Akona® Power Patch Pro
Akona Power Patch Pro is a high-strength, non-sag, two component epoxy used to bond, repair, or fill blemishes in concrete, brick, wood, and stone and can be used for both overhead and vertical repairs. The application temperature range is between 40°F-100°F (4°C-38°C)
-
Rapid Patch® Concrete Crack & Patch
Rapid Patch Concrete Crack & Patch is a heavy duty, fast-setting patching material for concrete block, sidewalks, patios, steps, and other concrete or masonry surfaces. This product is suitable for interior or exterior applications and may be trowel applied over existing concrete surfaces from a feather edge to a one half inch thickness to refinish the concrete surface.
-
Rapid Patch® FlexCrete
Rapid Patch FlexCrete is a single component, polymer modified, Portland Cement based waterproofing mortar for use in applications where a flexible, durable watertight barrier is required. Flexcrete is designed to bond to concrete and masonry surfaces, is resistant to freeze thaw conditions and chemical and sulfate exposure.
-
Rapid Patch® Self-Leveling Resurfacer
Rapid Patch Self-Leveling Resurfacer (BOM #103145) is a cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for light industrial floors where a hard, flat smooth surface and a quick return to service is desired. Also use as an underlayment for installation of ceramic tile, stone, resilient flooring, carpet, or other finished flooring. Typical substrates include: fully cured concrete, APA rated exterior grade/exposure 1 plywood or OSB underlayment grade equivalent with expanded wire lath reinforcement. Install from feather edge to 2 in. (50 mm) thick.
-
Sakrete® 5000 Plus High Strength Concrete Mix
Sakrete® 5000 Plus Concrete Mix (BOM #120020) is a professional grade concrete mix used for building and repairs greater than 2" depth.
-
Sakrete® Epoxy Tube Nozzles (3-Pack)
Sakrete® Epoxy Tube Nozzles are intended to provide customers additional nozzles for use with epoxy tube products. Both the original nozzle and the replacements are one-time use nozzles which should be discarded after use. This solves the issue when customers use only a portion of the product, but have to discard of the original one-time use nozzle. This product comes in packs of 3 tubes per bag.
-
Akona® Concrete Bonding Additive
Akona® Concrete Bonding Additive is an acrylic cement modifier that dramatically improves strength, adhesion, abrasion resistance and freeze-thaw resistance and is ideally suited for use with sand, mortar, cement mixes and selected Akona Repair Products. Akona Concrete Bonding Additive produces a patch that will adhere to old concrete and provides the adhesion required for thin overlays. Available in 1 gal. bottles (BOM #102659) and 1 qt. bottles (BOM #102658).
-
Quikrete® 5000 Concrete Mix
Quikrete® 5000 Concrete Mix (BOM #104624) is a commercial-grade blend of stone or gravel, sand and cement specially designed for higher early strength and ideal for cold weather application. Just add water, mix and use for concrete projects 2" thick or more such as driveway aprons, patios, deck supports, and sign footings. Achieves 5,000 psi after 28 days.
-
TCC Materials® Concrete Curb Mix
TCC Materials® Concrete Curb Mix is a dry, preblended, air entrained concrete mix containing cementitious material, aggregate and other special additives formulated for flowability and freeze-thaw resistance. The product is designed for ease of installation using a concrete curb machine. Available in two designs: Concrete Curb Mix-CS (BOM #104202): Coarse Sand, HRWR, AIR Concrete Curb Mix-CS/PR (BOM #104203.1): Coarse Sand, ⅜" Pea Rock, HRWR, AIR
-
TechMix® Premium Concrete Countertop Mix
TechMix® Premium Concrete Countertop Mix is a fast-setting, high-strength mix specially formulated to create countertops, outdoor kitchen tops, bar or table tops, workbench or utility tops. This product can also be used to produce precast wall caps, mantel or lintels for many different applications. Premium Concrete Countertop Mix needs only water to produce an easy-to-use, pourable mixture that can be de-molded in 18-24 hours. Available in a 50 lb. bag in gray (BOM #103434) or white (BOM #104082).
-
TechMix® Concrete Mix
TechMix® Concrete Mix is a high strength pre-blended Portland cement mixture for pouring concrete 2 inches thick or greater. Used for general building and repairing steps, slabs, walks, and floors. Available in 60# bags (BOM #104879) and 80# bags (BOM #104883).
-
Quikrete® Concrete Mix
Quikrete® Concrete Mix (BOM #100389) is the original 4,000 psi average compressive strength blend of Portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. Designed for pouring concrete 2" thick or more or building/repairing concrete structures. Available in 80 lb. bags (BOM #100389), 60 lb. bags (BOM #101356), and 40 lb. bags (BOM #104606). Approximate Yield: 80 lbs. = 0.60 cu. ft. 60 lbs. = 0.45 cu. ft.
-
SAKRETE® Cement Colors
Sakrete® Cement Colors are synthetic mineral oxide additives that are durable, alkali-resistant, and ultraviolet resistant. Conveniently packaged to mix one tub to one 50-80 lb. bag of Sakrete's preblended concrete, mortar, or sand mixes. Available in Charcoal (BOM#129451), Buff (BOM#129452), Red (BOM#129453), and Terra Cotta (BOM#129454).
-
TechMix® Crack-Resistant Concrete Mix
TechMix® Crack-Resistant Concrete Mix (BOM #110260) is a high-strength, pre-blended Portland cement mixture for pouring concrete 2" (5 cm) thick or greater. Crack-Resistant Concrete Mix is air-entrained to increase freeze-thaw durability and fiber-reinforced to reduce shrinkage cracks and improve impact resistance. Meets or exceeds requirements of ASTM C387.
-
TechMix® Fast-Setting Concrete Mix
TechMix® Fast-Setting Concrete Mix (BOM #104877) is a specially formulated accelerated setting, high early strength mortar for use in applications of 2" thick or greater.
-
Quikrete® Crack-Resistant Concrete Mix
Quikrete® Crack-Resistant Concrete Mix (BOM #109358) is a construction grade blend of Portland cement, sand, gravel & special reinforcing fibers to reduce shrinkage cracks and improve impact resistance. Just add water and mix to create for walkways, patios, steps, garage or shed floors.
-
TechMix® High-Strength 5000 Concrete Mix
TechMix® High-Strength 5000 Concrete Mix is a commercial grade blend of aggregate, sand, and Portland cement specifically designed for higher early strength. Ideal for cold-weather applications, it achieves 5,000 psi after 28 days. Used for any application of 2" thick or greater. Available in 60# bags (BOM #101122) and 80# bags (BOM #104882).
-
Quikrete® Fast-Setting Concrete Mix
Quikrete® Fast-Setting Concrete Mix (BOM #100166) is a special blend of fast-setting cements, sand and gravel designed to set hard in approx. 20 to 40 minutes. Sets posts without mixing. Pour dry mix into hole and soak with water. Use for setting fence posts, mailbox posts, basketball posts, deck posts, or lamp posts. Or use to construct new steps, sidewalks, or concrete appliance pads.
-
Akona® Instant Post Cement
Akona® Instant Post Cement (BOM #102631) is used for quick setting of all metal, wood and plastic fence, mailbox, basketball and swing set posts. This product does not require pre-mixing prior to use. Simply pour dry mix into the hole with water as directed. Instant Post Cement does not require bracing and sets in approximately 10-20 minutes. Akona Instant Post Cement is not designed to be used for footings or structural supports.
-
Sakrete® Crack Resistant Concrete Mix
Formulated to reduce the risk of surface shrinkage cracks, Sakrete Crack Resistant Concrete Mix is a professional strength blend of cementitious materials, sands, stone and fibers. For repair and building jobs where concrete thickness exceeds 2”.
-
TechMix® Max Strength Concrete Mix
TechMix® Max Strength Concrete Mix (BOM #110259) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprietary performance additives designed to provide extended working time and high early strength for concrete applications requiring a minimum thickness of 1½ in. (38 mm). Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack resistance and increased toughness.
-
Sakrete® Fast-Setting Concrete Mix
Sakrete® Fast-Setting Concrete Mix (BOM #120019 = 50 lb. pail / #106576 = 50 lb. bag) sets posts and poles quickly and easily, even without blending the material. Sets in just ½ an hour so that no bracing is needed and exceeds the strength requirements of ASTM C 387. Fast-Setting Concrete Mix is intended for applications requiring at least 2 inches in thickness.
-
Tenon® Feather Patch Pro
Tenon® Feather Patch Pro is a fast-setting, polymer-modified, self-drying, cement-based patch and skim coating compound for interior use under ceramic tile, hardwood flooring, carpet and a wide array of floor coverings. Ideal for deeper patching, this product can be applied from feather-edge to 2 in. (51 mm) thick. Formulated for exceptional bond strength and superior workability, can be applied to concrete with a relative humidity (RH) up to 90%. Rapid-setting, with initial set in 15 minutes; can accept ceramic tile and stone applications, as well as moisture-sensitive floor coverings, in as little as 30 minutes or when completely dry. Available in 10 lb. (4.5 kg) pails (BOM #120618), and 25 lb. (11.3 kg) pails (BOM #120541).
-
Akona® Pre-Mixed Concrete & Stucco Patch
Akona® Pre-Mixed Concrete & Stucco Patch is a water-based formula intended to patch minor cracks, holes, and surface defects in concrete or stucco. Product may also be used for residential repairs of masonry walls and re-applying small broken pieces of concrete or tuck pointing brick mortar joints. Pre-Mixed Concrete & Stucco Patch offers superior adhesion and may be used for vertical or horizontal patches. Available in 1 quart tub (BOM #103962) and 1 gallon pail (BOM #120713).
-
Sakrete® Form Release Oil
Sakrete® Form Release Oil (BOM #120044) is a release agent for use with concrete forms. Allows forms to be removed earlier and easier, yet has only a light residue.
-
Sakrete® High Strength Concrete Mix
Sakrete® High Strength Concrete Mix (BOM #100171 = 60 lb. bag / #120021 = 50 lb. pail / #101090 = 80 lb. bag) is designed for anchoring posts and poles, and pouring footings and slabs. High Strength Concrete Mix is premium quality for consistent strength and durability and meets ASTM C 387 strength requirements for structural applications. Uses include building walks, drives, slabs and steps as well as anchoring posts and poles. High Strength Concrete Mix is for applications requiring at least 2 inches in thickness. Just add water, mix, and use.
-
Sakrete® Pro-X180 Rapid Strength Concrete Mix
Sakrete® Pro-X180 Concrete Mix (BOM #110764) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprientary performance additives designed to provide extended working time and high early strength for concrete applications requiring a mininum thickness of 1-1/2". Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack-resistance and increased toughness.
-
Akona® Epoxy Tube Nozzles (2-Pack)
Akona® Epoxy Tube Nozzles are intended to provide customers additional nozzles for use with epoxy tube products. Both the original nozzle and the replacements are one-time use nozzles which should be discarded after use. This solves the issue when customers use only a portion of the product, but have to discard of the original one-time use nozzle. This product comes in packs of 2 tubes per bag.
-
TechPro® Stone Veneer Sealant
TechPro® Stone Veneer Sealant is a one-component, high-performance, non-priming, gun-grade, polyurethane elastomeric sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry. Available in 5 colors to coordinate with TechPro Stone Veneer Grout: Gray (BOM #120450); Brown (BOM #120453); Tan (BOM #120452), White (BOM #120451); and Charcoal (BOM #130100)