Grouts
-
Spec Mix® Corefill Masonry Grout – 3,000 PSI
Spec Mix® Corefill Grout - 3,000 psi (BOM #106745) is dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction. TCC Materials also offers Corefill Grout with course sand (BOM #107236) or fine sand (BOM #105675). Also available in 3,000 lb. (BOM #104768) bulk bags Corefill Grout with course sand (BOM #105721) or fine sand (BOM #104257). to work with our silo system. Please contact your salesperson for more information.
-
TCC Materials® Corefill Masonry Grout
TCC Materials® Corefill Masonry Grout (BOM #103501) is used to fill reinforced bond beams, to bond adjacent masonry units together, to bond steel reinforcement in the cores of masonry units and for filling masonry voids. Core Fill Masonry Grout is formulated for superior flow to fill masonry voids while meeting ASTM C476 requirements for reinforced masonry construction. Yields approximately ⅔ of a cubic foot of wet grout per 80 lb. (36.3 kg) bag. For concrete block this will fill about 4 cores in a 12" unit or about 5.5 cores in an 8" unit. Available in a 80 lb. (36.3 kg) bag.
-
TechMix® Corefill Masonry Grout
TechMix® Corefill Masonry Grout is formulated for superior flow to fill masonry voids while meeting ASTM C476 requirements for reinforced masonry construction. Corefill Masonry Grout is used to bond masonry units and steel reinforcement in the cores of the units together, as well as, filling reinforced bond beams. Available in 80# bags (Coarse - BOM #111227; Fine - BOM #111237) and 3000# bulk bags (Coarse - BOM #111120; Fine - BOM #111121).
-
Akona® Non-Shrink Grout (6,700 PSI)
Akona® Non-Shrink Grout (BOM #104953) is a pre-blended, pourable, non-metallic, Portland-cement based material used for grouting steel columns, bearing plates, precast concrete and anchors. Our Non-Shrink Grout compensates for an uneven foundation, distributes the weight of the unit, and prevents shifting after settling and leveling the unit. Akona Non-Shrink Grout is composed of aggregates, Portland cement and other additives to create an interior or exterior grout with non-shrinking characteristics capable of handling high-load transfers. Meets ASTM C1107 and is MN, WI, and NE DOT approved.
-
Quikrete® Precision Non-Shrink Grout
Quikrete® Non-Shrink Precision Grout (BOM #100713) is a high-strength, non-metallic grout designed for precision grouting and general construction applications. Simply add water and mix to obtain flowable properties and high strengths. Its non-shrink characteristics make it stable and capable of handling high load transfers. This grout can be mixed to a plastic, flowable or fluid consistency to for grouting pre-cast concrete, heavy equipment, bearing plates, steel columns, and anchoring applications. At 28 days the compressive strengths reach 14,000 psi at a plastic consistency, 12,000 psi at a flowable consistency, and 8000 psi at a fluid consistency. Complies with ASTM C1107 and Army Corp of Engineers CRD 621.
-
Sakrete® Non-Shrink Construction Grout
Sakrete® Non-Shrink Construction Grout (BOM #120024) is a non-shrink, non-metallic, Portland cement based material with special additives designed with high flexural and compressive strength to handle high-load transfers. Used for grouting of machinery bases, bearing plates, pre-cast concrete, columns, beams and other anchoring applications.
-
Sakrete® Non-Shrink General Purpose Grout
Sakrete® Non-Shrink General Purpose Grout (BOM #120025) is a commercial grade non-metallic Portland cement based structural hydraulic cement for high-strength grouting.
-
TechPro® Stone Veneer Joint Grout
TechPro® Stone Veneer Joint Grout is a mixture of dry cementitious materials and dried sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water only. "Step 3" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls. Available in 4 colors to compliment or contrast veneer units: Gray (BOM #120446); Brown (BOM #120449); Tan (BOM #120448), White (BOM #120447); and Charcoal (BOM #130110).