Available Online
Find a variety of products available for purchase online!
-
Akona® Akonastone™ Multi-Purpose Cleaner
Akona® Akonastone™ Multi-Purpose Cleaner is a phosphoric acid-based cleaner that can be mixed with water to form a mild cleaning and etching solution for use on concrete, masonry or used as supplied to remove efflorescence from mineral based surfaces. Use for cleaning and preparing concrete and masonry surfaces prior to repair patching or the application of a coating or sealer. Helps to remove rust from iron surfaces and tarnish from copper. Helps to remove hot tire marks on concrete. Helps to remove oil based stains, dirt, and grime from mineral based surfaces.
-
Akona® Concrete & Masonry Dissolver
Akona® Concrete & Masonry Dissolver is an environmentally-friendly liquid alternative to aggressive acid concrete removers. Concrete & Masonry Dissolver can be used to safely remove cured concrete, mortar, grout, and stucco buildup from tools, concrete forms, job mixers, hardware, shoring, and more. This product deconstructs the bond between the Portland cement component, turning it into a soft paste-like mush that is easily removed from the surface. Available in 28 oz. spray bottle (BOM #121261).
-
Akona® Concrete & Mortar Color
Akona® Concrete & Mortar Colors give you a simple way to color your concrete, masonry, or grout project. Made of synthetic mineral oxide, these color additives will provide a durable, alkali– and ultraviolet-resistant finish to any cementitious application. Just add one canister to a bag of concrete, mortar, or grout mix to give your project a more decorative look. Great for use with TechMix® Premium Countertop Mix! Available in Charcoal, Terracotta, Brick Red, Buff, and Brown.
-
Akona® Concrete Cure & Seal
Akona Concrete Cure & Seal is a clear, non-yellowing, waterborne, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly placed and/or existing concrete, pavers, brick, stone, and other cementitious materials. Concrete Cure & Seal is formulated to cure, seal, protect, and dustproof. Designed for both exterior and interior applications. The white solution dries clear and provides a dust-free surface. Concrete Cure & Seal provides maximum hardness to the concrete as well as resistance to traffic abrasion when applied to freshly placed concrete. Construction debris is easier to remove. It is compatible with most tile and carpet adhesives. On existing driveways, sidewalks, garage floors it provides protection from water penetration, salts, grease, etc. Available in a 1 gallon bottle (BOM #121281).
-
Akona® Concrete Form Release
Akona Concrete Form Release is a water-based concrete form release agent which provides a clean release from plywood, fiberglass, aluminum, steel, urethane, and other concrete forming materials. Economical and effective against adhesion to the form and surfacing dusting. Will not stain concrete or interfere with coatings when properly applied. Available in 28 oz. sprayer (BOM #121263) and 1 gallon bottle (BOM #121264).
-
Akona® Power Patch Pro
Akona Power Patch Pro is a high-strength, non-sag, two component epoxy used to bond, repair, or fill blemishes in concrete, brick, wood, and stone and can be used for both overhead and vertical repairs. The application temperature range is between 40°F-100°F (4°C-38°C)
-
Akona® Wet/Cold Concrete & Masonry Loc
Akona® Wet/Cold Concrete & Masonry Loc is a two component, non-sag, high-performance anchoring adhesive for use down to 15°F (-9°C). Great for bonding new concrete to existing concrete, repairing structural cracks in concrete surfaces, and adhering dowel bars and tie bars for full depth concrete repairs.
-
Cherry Stone® Poultry Grit
Cherry Stone® Poultry Grit is a clean, hard, angular grit to aid in digestion for poultry. Made of 100% crushed quartzite, this grit is even harder and sharper than granite which enables the gizzard to work faster and more efficiently. Cherry Stone offers anti-parasitic benefits, it won't dissolve in the gizzard, upset the mineral balance of feed, or neutralize digestive juices so it does a more thorough job of digestion. Due to its unique rose color, Cherry Stone Grit is often used for hobby crafts, aquariums, flower pot drainage, grill liners, paver joint fill, aeration, and other decorative purposes. Our grit is available in 25# and 50# bags in four sizes to cater to every size bird and it comes in a pink-gray color which birds are attracted to: #1 (25# BOM #114297, 50# BOM #105237), #2 (25# BOM #114307, 50# BOM #105238), #3 (BOM #105239), and #4 (BOM #105240). Also available in 2,000 lb. bulk bags including #1 (BOM #105241), #2 (BOM #105242), #3 (BOM #105243), and #4 (BOM # 105244)
-
Granusil® Mineral Filler
Granusil® Mineral Filler is produced from high purity industrial quartz sands for a wide variety of industrial and contractor mixed applications which need a reliable silica contribution or require a chemically inert structural filler. The durable monocrystalline structures resist abrasion in high traffic-excessive wear applications. Granusil® Mineral Filler 5020 (BOM #100365) is available in 50 lb. bag and Granusil® Mineral Filler 4030 (BOM #114261) is available in 50 lb. bag.
**Pack quantities may vary based on the manufacturing facility. Please verify the number of bags per pallet with your salesperson or contact us.
-
NorthRock® Edge Loc
NorthRock Edge Loc Superior Concrete Paver Edging is a specially formulated blend of hydraulic cement, graded aggregates, polymers, fibers and performance admixtures. It is designed to provide lateral support and stability to paver installations. The polymer-modified fiber-reinforced formula is designed to be freeze-thaw durable and flexible enough to accommodate soil movements without deteriorating. Easy, just add water formulation. Available in a 25 lb. pail (BOM# 114321) and a 50 lb. bag (BOM# 114874).
-
NorthRock® Landscape Loc® Mulch & Rock Bond
NorthRock® Landscape Loc® Mulch & Rock Bond is a specially-formulated, locking compound to stabilize mulch, rock, gravel, sand, and other ground cover. It prevents movement caused by rain, wind, wildlife, mowers, leaf blowers, pets, and other sources while allowing the substrate to drain and breathe. It is environmentally safe for groundwater, plants, and pets. Use Landscape Loc Mulch & Rock Bond around pools and ponds to prevent mulch from getting into the water. Also can be used to control dust, erosion, sand, dirt, pebbles, light rock, and gravel. Coverage will vary from 250–750 sq. ft./gallon depending on weight, size, porosity and desired hold of material. Rock applications will required more product to get similar results, depending on the size, shape, and porosity of the rock and depth of application.
*1 gallon bottle color may vary for a limited time*
-
NorthRock® Landscape Loc® Mulch & Rock Bond Concentrate
Landscape Loc Mulch & Rock Bond Concentrate is a specially formulated concentrated locking compound to stabilize mulch, rock, gravel, decomposed granite, and other ground cover. Landscape Loc Concentrate prevents movement caused by rain, wind, wildlife, mowers, leaf blowers, pets, and other sources while allowing the substrate to drain and breathe. Thereby sustaining and enhancing the natural look of your mulch. Landscape Loc Concentrate has been tested and proven to be environmentally safe for ground and water. For best performance, use during the same growing season as purchased. Just shake, dilute, & use! Available in a 1-gallon bottle (BOM #114923).
-
NorthRock® Trap Rock
NorthRock Trap Rock is a 1½” dark gray rock that helps retain moisture and helps deter weed growth. It makes for a great decorative accent to any garden and is intended for use in yards or around ponds. It provides lasting beauty and comes in ½ cubic foot bags for ease in placement.
-
Quikrete® All-Purpose Gravel
Quikrete® All-Purpose Gravel (BOM #105521) is a multi-use product for a variety of decorative and landscaping applications. Also for making concrete.
-
Quikrete® FastSet™ All-Crete™
FastSet™ All-Crete™ is a dual-purpose product. As a non-metallic fluid grout meeting ASTM C1107, it is used for anchoring and grouting of anchor bolts, retrofitted reinforcing steel, steel column bases, bearing plates, precast concrete key ways and other installations that require high early and high ultimate strength. Non-shrink characteristics make it stable and capable of handling load transfers. As a repair material, the product meets ASTM C928 R3 and is used to make partial depth or full depth repairs to roads, bridges, industrial floors and other concrete surfaces. Available in 20 lb. pails (BOM #113202) and 55 lb. bags (BOM #113203).
-
Quikrete® FastSet™ Concrete Mix
QUIKRETE® FastSet™ Concrete Mix (BOM #113204) is a fast-setting, high early strength concrete designed to build or repair concrete sidewalks, driveways, highways, bridge decks, concrete parking lots and concrete floors. Use at any thickness from 2 in to 24 in (50 mm to 610 mm). FastSet™ Concrete has less shrinkage than ordinary Portland cement concrete. The addition of corrosion inhibitor has no adverse effect on the other physical properties of the product.
-
Quikrete® FastSet™ Repair Mortar
FastSet™ Repair Mortar demonstrates low sag, making it ideal for vertical or overhead repairs. FastSet™ Repair Mortar is also available with integral corrosion inhibitor in cases where maximum corrosion protection is desired. The addition of corrosion inhibitor has no adverse effect on the other physical properties of the product. This product can be built up […]
-
Quikrete® FastSet™ Self-Leveling Floor Resurfacer
High Performance Cement FastSet™ Self-Leveling Floor Resurfacer (BOM #110439) is a self-finishing interior & exterior floor topping and underlayment specially formulated to work without troweling. High Performance Cement FastSet™ Self-Leveling Floor Resurfacer produces a smooth surface ready for the installation of ceramic tile, resilient flooring, carpet or other finishes. FastSet™ Self-Leveling Floor Resurfacer can also be used as a wear surface for light duty industrial floors. Following are typical substrates: • Precast concrete plank • New concrete floor slabs with unacceptable finishes • Existing concrete floors with damaged finishes • Over wood floor systems, utilizing expanded metal lath reinforcement • FastSet™ Self-Leveling Floor Resurfacer may be used for outdoor service
-
Quikrete® FastSet™ Water-Stop Cement
High Performance Cement FastSet™ Water-Stop Cement (BOM #113205) is a rapid setting, high strength repair material designed to plug leaks instantly in concrete and masonry. FastSet™ Water-Stop Cement will block running water when application is made to masonry or concrete surfaces. This special formulation allows the product to obtain high strength and rapid setting while repelling water. FastSet™ Water-Stop Cement solves leakage problems wherever active water is present, in all masonry and concrete above and below grade. Use FastSet™ Water-Stop Cement for sealing around concrete pipes and for plugging leaks in: • Foundation and retaining walls • Chimneys • Swimming pools, fountains and cisterns
-
Rapid Patch® Concrete Crack & Patch
Rapid Patch Concrete Crack & Patch is a heavy duty, fast-setting patching material for concrete block, sidewalks, patios, steps, and other concrete or masonry surfaces. This product is suitable for interior or exterior applications and may be trowel applied over existing concrete surfaces from a feather edge to a one half inch thickness to refinish the concrete surface.
-
Rapid Patch® Feather Edge Pro
Rapid Patch® Feather Edge Pro (BOM #129490) is a trowelable, rapid-setting, Portland cement-based, polymer-modified, patch and skim coating compound for use on multiple substrates. This specially formulated, non-sanded product results in an ultra-smooth finish and can be applied from feather edge to ½ in. (13 mm) and is ideal for use as an embossing leveler.
-
Rapid Patch® FlexCrete
Rapid Patch FlexCrete is a single component, polymer modified, Portland Cement based waterproofing mortar for use in applications where a flexible, durable watertight barrier is required. Flexcrete is designed to bond to concrete and masonry surfaces, is resistant to freeze thaw conditions and chemical and sulfate exposure.
-
Rapid Patch® Hairline Crack Repair
Rapid Patch Hairline Crack Repair is a two-component, low-viscosity, 100% solids, urethane repair product designed for filling cracks in structural materials including concrete and bricks, for the purpose of bonding and sealing them. Product goes on black and dries gray. Designed for filling narrow cracks with maximum width of ¼ in. (6 mm) to a maximum depth of 6 in. (150 mm).
-
Rapid Patch® Moldable Concrete Repair
Rapid Patch® Moldable Concrete Repair is a fast setting, general purpose cement-based patching material for repairing concrete and masonry. Moldable Concrete Repair is a proprietary blend of Portland cements, aggregate and additives that achieve an initial set in 10-15 minutes; final set in 20-25 minutes. It can be shaved down for a more uniform looking repair after the initial set. Primary applications include drive-ways, walkways, stairs, patios, pool decks, basement floors and garage floors.
-
Rapid Patch® Rapid Loc™ Concrete & Veneer Bond
Rapid Patch® Rapid Loc™ Concrete & Veneer Bond is an innovative high-grab sealant which has high initial tack to hold materials in place while the adhesive cures, specifically designed for adhering stone, ceramic tile, and other construction materials to vertical surfaces. Rapid Loc Concrete & Veneer Bond is based on silyl-modified polymer technology that cures on exposure to atmospheric moisture to form a fast, tough, durable adhesive. Rapid Loc Concrete & Veneer Bond exhibits excellent adhesive properties to most common substrates including stone, brick veneer, aluminum, brass, vinyl, steel, stainless steel, glass, mirrors, mortar, concrete, wood, OSB, plywood, ceramic tile, brick, foam board, pavers, painted surfaces, fiberglass, and many plastics. Rapid Loc Concrete & Veneer Bond is highly weather resistant, remains flexible in low temperature extremes, and can be painted with most paints. Available in 9.5 oz. tube (BOM #130170).
-
Rapid Patch® Self-Leveling Resurfacer
Rapid Patch Self-Leveling Resurfacer (BOM #103145) is a cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for light industrial floors where a hard, flat smooth surface and a quick return to service is desired. Also use as an underlayment for installation of ceramic tile, stone, resilient flooring, carpet, or other finished flooring. Typical substrates include: fully cured concrete, APA rated exterior grade/exposure 1 plywood or OSB underlayment grade equivalent with expanded wire lath reinforcement. Install from feather edge to 2 in. (50 mm) thick.
-
Sakrete® 5000 Plus High Strength Concrete Mix
Sakrete® 5000 Plus Concrete Mix (BOM #120020) is a professional grade concrete mix used for building and repairs greater than 2" depth.
-
Sakrete® Epoxy Tube Nozzles (3-Pack)
Sakrete® Epoxy Tube Nozzles are intended to provide customers additional nozzles for use with epoxy tube products. Both the original nozzle and the replacements are one-time use nozzles which should be discarded after use. This solves the issue when customers use only a portion of the product, but have to discard of the original one-time use nozzle. This product comes in packs of 3 tubes per bag.
-
Sakrete® Pro-Mix All-Purpose Cement Mix
Pro-Mix™ All-Purpose Cement Mix is a fast setting, high performance concrete repair material that is shrinkage compensating, and high strength. Just add water to produce an easy to use mix ideal for repairs where short down times are critical and high durability and rapid strength are needed. Available in 20 lb. pails (BOM #113014) and 50 lb. bags (BOM #112704).
-
Signature Pelletized Gypsum
Signature Pelletized Gypsum (BOM #103589) is an excellent source of calcium and sulfur used to improve soil structure. It allows for better water and oxygen penetration, addresses salt damage from winter de-icing, pets, and effluent water. Additionally, it stimulates microorganism growth and helps alleviate blossom end rot.
-
SPEC MIX® Corefill Masonry Grout – 3,000 PSI
SPEC MIX® Corefill Grout - 3,000 psi (BOM #106745) is dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction. TCC Materials also offers Corefill Grout with course sand (BOM #107236) or fine sand (BOM #105675). Also available in 3,000 lb. (BOM #104768) bulk bags Corefill Grout with course sand (BOM #105721) or fine sand (BOM #104257). to work with our silo system. Please contact your salesperson for more information.
-
Tenon® Concrete & Mortar Dissolver RM
Tenon® Concrete & Mortar Dissolver RM is an environmentally-friendly liquid alternative to aggressive acid based concrete removers. Concrete & Mortar Dissolver RM is specifically designed for use in the ready-mix industry to clean equipment while the concrete and mortar are still in their plastic state. This product will retard the set time and prevent the cementitious bonds from forming, allowing the material to be easily washed from the equipment and tools.
-
Tenon® FormGuard
Tenon® FormGuard is a V.O.C. compliant, ready-to-use, petroleum based, chemically reactive liquid concrete form release agent. Tenon FormGuard effectively prevents bonding of concrete to forms and formliners. Use of Tenon FormGuard regularly will increase the life of all forms. Tenon FormGuard can be used on forms such as steel, aluminum, fiberglass-reinforced, all grades of plywood, epoxy-coated, and urethane-coated.
-
Waukesha Field Marking Lime
Waukesha Field Marking Lime (BOM #101145) is good for turf, harmless to skin and clothing, produces a whiter line, is easy to apply, and is preferred by coaches & groundskeepers.
-
Akona® Concrete Bonding Additive
Akona® Concrete Bonding Additive is an acrylic cement modifier that dramatically improves strength, adhesion, abrasion resistance and freeze-thaw resistance and is ideally suited for use with sand, mortar, cement mixes and selected Akona Repair Products. Akona Concrete Bonding Additive produces a patch that will adhere to old concrete and provides the adhesion required for thin overlays. Available in 1 gal. bottles (BOM #102659) and 1 qt. bottles (BOM #102658).
-
Cherry Stone® Traction Grit
Cherry Stone® Traction Grit (BOM #105248), (BOM #129580), (BOM #129590), (BOM #129880) works when salt and chemicals won't. Sprinkle the fine, sharp, crushed rock on icy and snow-packed walkways, driveways, and streets for immediate non-slip relief. Unlike salt, Cherry Stone Grit will not hasten the deterioration of concrete surfaces or harm plants or grass. Made from Quartzite, our grit is granite-hard and won't dissolve, become muddy, stain, or pollute. Keep a bag in your car for additional weight and emergency winter traction. Due to its unique rose color, Cherry Stone Grit is often used for hobby crafts, aquariums, flower pot drainage, grill liners, paver joint fill, aeration, and other decorative purposes.
-
NorthRock® Mountain Blend
NorthRock® Mountain Blend Rock (BOM #106000) is a versatile blend of colors which will compliment any home or landscape. Use for any landscape project including gardens, paths, ponds, tree rings, or edging around your home or shed. **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Quikrete® 5000 Concrete Mix
Quikrete® 5000 Concrete Mix (BOM #104624) is a commercial-grade blend of stone or gravel, sand and cement specially designed for higher early strength and ideal for cold weather application. Just add water, mix and use for concrete projects 2" thick or more such as driveway aprons, patios, deck supports, and sign footings. Achieves 5,000 psi after 28 days.
-
Rapid Patch® Concrete Repair Mortar
Rapid Patch® Concrete Repair Mortar (20 lb. BOM #129460, 50 lb. BOM#129470) is a fast-setting, high-performance, multi-use blend of hydraulic cement, polymers, fine aggregates, and special additives used for concrete repair and new construction where high early strength, excellent durability, and low shrinkage is required. Mix with water for applications from ½ in. minimum to 6 in. maximum thickness (1.3-15 cm).
-
Sakrete® Ash Tray Sand (Black)
Sakrete® Ash Tray Sand - Black (BOM #120017) is a non-flammable granular dry powder used to fill ashtray vestibules and containers used for extinguishing cigarettes and cigars. Economical to use, can be sifted to remove butts and ends. Ash Tray Sand will not burn.
-
TechPro® Congelz®
TechPro® CONGELZ® Waste Water Solidification is an environmentally-friendly solution to disposing of unwanted rinse water or mortar slurry from any mortar or concrete project. When used as directed, this patented technology transforms rinse water from a liquid to a gel. Passes ASTM 9095B paint filler test, this gel has been determined to be safe and legal for landfill disposal. Using CONGELZ solves the common issues caused by cementitious waste disposal - no more clogged drains or dumping of product on jobsites. Simply add the product to your rinse water, allow to gel, and toss the works in the trash. Available in a 5 lb. box (BOM #121214), 15 lb. box (BOM #121213), and 40 lb. box (BOM #121210).
-
Akona® Concrete/Masonry Restoration Cleaner
Akona® Concrete/Masonry Restoration Cleaner (BOM #102652) is a mild, acidic product that dissolves and removes efflorescence (white mineral deposits) and rust stains from concrete surfaces, masonry units, pavers, brick, etc. This product is recommended to be used before applying a sealer to the surface of concrete or masonry. This enables the sealer to penetrate and seal more effectively. Use this product before applying Akona Penetrating Paver & Masonry Sealer or Akona Water Based Concrete Sealer. In addition, Akona Surface Concrete Cleaner may be used to prepare the surface of concrete or masonry prior to using Akona Repair Products.
-
NorthRock® Multi-Purpose Gravel
NorthRock® Multi-Purpose Gravel (BOM #104103) can be used as a decorative landscape rock for gardens, pathways, ponds, borders or for a variety of uses around the house, such as drainage, trench bedding or backfilling applications. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Quikrete® All-Purpose Sand
Quikrete® All-Purpose Sand is a washed, properly graded coarse sand with multi-purpose uses. Meets ASTM C 33 specifications. Available in 50 lb. bags plain (BOM #108620) or dried (BOM #105755).
-
Rapid Patch® Multi-Purpose Repair
Rapid Patch® Multi-Purpose Repair (20 lb. BOM #129440, 50 lb. BOM #129450) is a fast-setting, high-performance, multi-use blend of hydraulic cement, fine aggregates, and special additives used for concrete repair and new construction, including casting, anchoring, grouting, and wet environments. Adheres to concrete, stone, masonry, and stucco. Mix with water for applications from feather-edge to 4 in. (10 cm).
-
Sakrete® Ash Tray Sand (Off White)
Sakrete® Ash Tray Sand - Off White (BOM #120016) is a non-flammable granular dry powder used to fill ashtray vestibules and containers used for extinguishing cigarettes and cigars. Economical to use, can be sifted to remove butts and ends. Ash Tray Sand will not burn.
-
TechMix® Black Blast
TechMix® Black Blast (BOM #106908) are abrasive blasting crystals that can be used for rust/paint removal and cleaning stone and brick. Additionally, the crystals hard, sharp, evenly-sized crystals make them ideal to frost/etch glass. Black Blast crystals work with all blasting equipment, are safe to use, and have a 1.5-2.0 mil anchor profile.
-
TechMix® Premium Concrete Countertop Mix
TechMix® Premium Concrete Countertop Mix is a fast-setting, high-strength mix specially formulated to create countertops, outdoor kitchen tops, bar or table tops, workbench or utility tops. This product can also be used to produce precast wall caps, mantel or lintels for many different applications. Premium Concrete Countertop Mix needs only water to produce an easy-to-use, pourable mixture that can be de-molded in 18-24 hours. Available in a 50 lb. bag in gray (BOM #103434) or white (BOM #104082).
-
Akona® Concrete/Masonry Set Accelerator
Akona® Concrete/Masonry Set Accelerator (BOM #103963) is an ASTM C494, Type C, non-chloride, non-corrosive, liquid that improves workability and initial strength while it reduces the hydration time of cement. The product is recommended for use during cooler weather to accelerate set time and reduce the risk of frozen mortar and concrete mixes. It is also recommended for use when early strength gain is desired to speed up projects. Akona Concrete/Masonry Set Accelerator provides a reduced curing time, faster set time and increased early strength. The product speeds finishing operations in any weather condition without any corrosive effects.
-
Quikrete® Black Top Patch
Quikrete® High Performance Blacktop Patch (BOM #109958) is a specifically-formulated, commercial-grade, asphalt cold-patch material for repairing potholes and cracks over 1" (25.4 mm) wide in asphalt pavements. It is suitable for use on roads, driveways, parking lots, and walkways. All-season formulation is suitable for making permanent repairs in wet or dry conditions.
-
Sakrete® Blacktop Crack Filler
Sakrete® Blacktop Crack Filler (BOM #120041 = Qt. / #120039 = Gal.) is used to fill cracks in blacktop up to 1/4 inch wide to help stop damaging water penetration. Ideal for repairs prior to sealing.
-
TCC Materials® Corefill Masonry Grout
TCC Materials® Corefill Masonry Grout (BOM #103501) is used to fill reinforced bond beams, to bond adjacent masonry units together, to bond steel reinforcement in the cores of masonry units and for filling masonry voids. Core Fill Masonry Grout is formulated for superior flow to fill masonry voids while meeting ASTM C476 requirements for reinforced masonry construction. Yields approximately ⅔ of a cubic foot of wet grout per 80 lb. (36.3 kg) bag. For concrete block this will fill about 4 cores in a 12" unit or about 5.5 cores in an 8" unit. Available in a 80 lb. (36.3 kg) bag.
-
Tenon® Air Entrainment
Tenon® Air Entrainment (BOM #120377) is a ready-to-use, aqueous solution made of organic materials. Air Entrainment entrains a small and stable amount of air into the desired mix. These small, stable air voids enhance the mixture and improve workability. Its chemical composition and physical properties make it ideal for many construction applications. It is intended for use when increased workability and freeze-thaw durability of concrete or mortar is preferred. This admixture also improves resistance to freeze/thaw, scaling, segregation, and bleeding and improves strength, plasticity, water retention, and cohesiveness of mortar. Meets ASTM C260 Standard Specification for Air-Entraining Admixtures for Concrete.
-
Akona® Concrete Repair
Akona® Concrete Repair (BOM #103173) is a flexible, quick-drying, paintable filler and sealant for repairs to vertical and horizontal concrete, masonry, stone, and stucco surfaces. It's gray color and sanded texture is designed to blend in with most standard concrete surfaces.
-
NorthRock® Paver Base
NorthRock® Paver Base (BOM #106100) is screened before packaging. This product is ideal for forming a base and underlayment for concrete block or brick, paving stones, patio stones, edgers, and segmental retaining walls. This sand is the proper grade for drainage and provides great durability where the ground has potential to freeze. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Quikrete® Color Additive
Quikrete® Color Additive is a liquid coloring agent used to customize the color of your concrete project. Mix with water and then add to dry concrete mix. One bottle will mix with two 80 lb. or 60 lb. bags of Concrete Mix. Available in Red (BOM #105510), Brown (BOM #105508), Buff (BOM #105509), Charcoal (BOM #105507), and Terra Cotta (BOM #107832).
-
SPEC MIX® Mortar
SPEC MIX® Portland Lime & Sand Mortar is a dry, preblended mortar mix containing Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #101212), Type S (BOM #101013), Type M (BOM #101320), and Type O (BOM #107500). PCL Sand is also available with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags Type N (BOM #100316), Type S (BOM #101455), Type M (BOM #101456), and Type O (BOM #109618) to work with our silo system. Please contact your salesperson for more information.
For jobsites with air-quality concerns, consider our LOW-DUST Mortar Option. For more information, please contact your salesperson for location availability and pricing.
-
TechMix® Concrete Mix
TechMix® Concrete Mix is a high strength pre-blended Portland cement mixture for pouring concrete 2 inches thick or greater. Used for general building and repairing steps, slabs, walks, and floors. Available in 60# bags (BOM #104879), 80# bags (BOM #104883) and 3,000# bags (BOM #112228).
-
Tenon® Blend-Pro™
Tenon® Blend-Pro™ is a fast-setting, one component, polymer-modified, calcium aluminate cement-based concrete and masonry patching compound designed for vertical and overhead repair applications.
Available in #3-15 Light Gray (BOM# 113529, 121158), #3-30 Light Gray (BOM# 113532, 114797). -
Akona® Crack-Resistant Surface Bonding Cement
Akona® Crack-Resistant Surface Bonding Cement is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete. Available in Gray (BOM #102614).
-
NorthRock® Paver-Leveling Sand
TCC Materials® NorthRock® Paver Leveling Sand (BOM #103130) should be used on top of paver base beneath the masonry pavers allowing the installer to level out the pavers. This product will make the patio more stable and assists in proper drainage. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Quikrete® Concrete Mix
Quikrete® Concrete Mix (BOM #100389) is the original 4,000 psi average compressive strength blend of Portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. Designed for pouring concrete 2" thick or more or building/repairing concrete structures. Available in 80 lb. bags (BOM #100389), 60 lb. bags (BOM #101356), and 40 lb. bags (BOM #104606). Approximate Yield: 80 lbs. = 0.60 cu. ft. 60 lbs. = 0.45 cu. ft.
-
SAKRETE® Cement Colors
Sakrete® Cement Colors are synthetic mineral oxide additives that are durable, alkali-resistant, and ultraviolet resistant. Conveniently packaged to mix one tub to one 50-80 lb. bag of Sakrete's preblended concrete, mortar, or sand mixes. Available in Charcoal (BOM#129451), Buff (BOM#129452), Red (BOM#129453), and Terra Cotta (BOM#129454).
-
Akona® Epoxy Crack Repair
Akona® Epoxy Crack Repair (BOM #120439) is a two-component, high-strength, 100% solids, epoxy repair product designed for injection into horizontal cracks in structural materials including concrete and bricks for the purpose of bonding and sealing. Special no-mess, self-mixing tube for easier application. Use to fill and bond narrow horizontal cracks up to 1/4" (6 mm) wide x 6" (150 mm) deep. Dries clear to light yellow color.
-
NorthRock® Pea Gravel
NorthRock® Pea Gravel (BOM #106095) is a high quality clean gravel with an approximate top size of 3/8". Can be used for a variety of applications such as for landscaping or decorative projects. It can also be used for making concrete. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Quikrete® Re-Cap Concrete Resurfacer
Quikrete® Re-Cap™ Concrete Resurfacer (BOM #112421) is a special blend of portland cement, sand, polymer modifiers and other additives. Designed to provide a shrinkage compensated repair material for making thin repairs to sound concrete in need of surface renewal. Can be squeegee, trowel or brush applied.
-
SAKRETE® Cement Mix Accelerator
Sakrete® Cement Mix Accelerator (BOM#120408) is a calcium-chloride based product designed to accelerate the set time of concrete, mortar, or any Portland cement based product.
-
Akona® Fast-Setting Anchoring Epoxy
Akona® Fast-Setting Anchoring Epoxy (BOM #120438) is a two-component, high-performance, 100% solids, high-modulus, non-sag gel epoxy designed for anchoring bolts, railings, dowels, and rebar steel into concrete and to bond or repair a variety of household and common building materials including concrete, porous tile, and stone. Special no-mess, self-mixing tube for easier application. Non-shrink, resistant to chemicals and solvents, this high-strength, fast-setting epoxy has a gel time in as little as 12-14 minutes; initial cure of 2 hours; and final cure time of 12-16 hours. Use both horizontal and vertical, up to 1/8" (3 mm) annular width and 10" (254 mm) depth. Because it is moisture tolerant, it is ideal for stopping air and water leaks. Gray in color.
-
NorthRock® Play Sand
NorthRock® Play Sand (BOM #106090) is screened and washed before packaging. This product is ideal for use in children’s sand boxes, gardens, retaining walls or between concrete or brick pavers. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Quikrete® Crack-Resistant Concrete Mix
Quikrete® Crack-Resistant Concrete Mix (BOM #109358) is a construction grade blend of Portland cement, sand, gravel & special reinforcing fibers to reduce shrinkage cracks and improve impact resistance. Just add water and mix to create for walkways, patios, steps, garage or shed floors.
-
Sakrete® Concrete & Asphalt Cleaner
Sakrete® Concrete & Asphalt Cleaner (BOM #120042) is a mild, acidic liquid used to clean concrete, masonry, and asphalt surfaces. Use to clean existing surfaces prior to making repairs.
-
Signature Pelletized Lime
Signature Pelletized Lime (BOM #103588) helps plant and crop growth by increasing the pH in acidic soil (pH below 7). It improves microbial action to help breakdown pesticides and organic matter as well as alleviates problems like blossom end rot and aluminum toxicity. It is great for increasing the effective use of other major nutrients and helping control weed pressure in lawns. This is done by boosting the plant's ability to absorb nitrogen and synthesize proteins.
-
TechMix® Corefill Masonry Grout
TechMix® Corefill Masonry Grout is formulated for superior flow to fill masonry voids while meeting ASTM C476 requirements for reinforced masonry construction. Corefill Masonry Grout is used to bond masonry units and steel reinforcement in the cores of the units together, as well as, filling reinforced bond beams. Available in 80# bags (Coarse - BOM #111227; Fine - BOM #111237) and 3000# bulk bags (Coarse - BOM #111120; Fine - BOM #111121).
-
Tenon® Concrete & Masonry Sealer WB
Tenon® Concrete & Masonry Sealer WB is a water-based sealer that penetrates and reacts chemically within the capillaries of the concrete or masonry, bonding to the silica in the substrate to protect against moisture penetration, water-related staining, atmospheric chemicals, and deterioration. It is used to protect and seal clean, dry, coating-free, fully-cured concrete, brick masonry, concrete masonry units, stucco, stone terrazzo, architectural concrete, and some natural stones. For above-grade exterior applications that are not subject to hydrostatic pressure. Ready-to-use, this low VOC, silane/siloxane emulsion is especially suited for applications where VOC regulations for AIM coatings prevent the use of solvent-borne products. Available in 1 gallon bottles (BOM #120673) and 5 gallon pails (BOM #120674).
-
Akona® Foundation Coating Cement
Akona® Foundation Coating Cement (BOM #102621) is a specially-formulated, cement-based product for coating and protecting polystyrene insulation board or insulated concrete forms (ICF) from weathering, ultraviolet rays, and general wear/impact. Akona Foundation Coating Cement is polymer-modified and contains fibers which reduces shrinkage and improves the adhesion properties of the product. Akona Foundation Coating Cement is easy to apply by masonry brush or trowel and has the superior durability of a Portland cement-based product. It also provides a tough, durable gray textured or stucco-like finish. If desired, the product may be integrally colored with a liquid cement or mortar colorant, or it can be painted to match existing home design.
-
NorthRock® Premium White Rock
NorthRock® Premium White Rock (BOM#112243) is a decorative landscape stone that adds beauty and protects your yard by keeping down weed growth and controlling erosion. The beauty of natural stone is great for enhancing your landscape around trees, shrubs, flowerbeds, ponds, and foundations. **NorthRock's aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Quikrete® Expansion Strips
Quikrete® Expansion Joint Strips (BOM #106868) are made from resilient wood fibers to prevent damage during expansion and contraction of concrete. These ½"x 4"x 60" weather-resistant strips are used between concrete slabs in driveways, sidewalks, and patios as well as to separate concrete from the structures they butt up to. Meets requirement of ASTM D 1751.
-
Sakrete® Concrete Bonder & Fortifier
Sakrete® Concrete Bonder & Fortifier (BOM #120036) is a high-solids acrylic liquid bonding agent, used as a bonding admix or bonding agent enhance strength, durability, adhesion, abrasion resistance, and freeze-thaw resistance of concrete.
-
Tenon® Concrete & Masonry Dissolver
Tenon® Concrete & Masonry Dissolver is an environmentally-friendly liquid alternative to aggressive acid concrete removers. Use to safely dissolve and remove cured concrete, mortar, grout, and stucco build-up from tools, concrete forms, job mixers, hardware, shoring, and more.
-
Akona® Heavy-Duty Waterproofing Base Coat
Akona® Heavy-Duty Waterproofing Base Coat (BOM #102624) is a Portland cement-based, waterproof coating for use over concrete, block, brick or stucco surfaces. Use for interior or exterior coating of foundation, basement or retaining walls below or above grade. When applied over non-uniform areas, this product provides a smooth or textured surface that can be left as a finished decorative coating. In addition, this product can serve as a base coat for paint or similar faux finishes. Please note that this product needs to be mixed with a mixture of water and Akona Concrete Bonding Additive (sold separately, BOM #102659).
-
NorthRock® Red Lava Rock
TCC Materials® NorthRock® Red Lava Rock (BOM #100618) is a lightweight, porous, decorative volcanic rock with a unique aesthetic appeal. Its deep burgundy color will enrich the look of your landscape project including flower beds, tree rings, and other accent applications. **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Sakrete® Concrete Crack Filler
Sakrete® Concrete Crack Filler (BOM #120026) is a flowable, polymer-based crack filler for concrete. This repair material is designed to fill and seal cracks in concrete up to 1/4 in. wide and 1/4 in. deep.
-
Akona® Instant Anchoring Cement
Akona® Instant Anchoring Cement (BOM #102645) is a quick-setting, anchoring cement compound used for setting poles, railings, bolts and fixtures in concrete or masonry. Suitable for interior or exterior use, this product expands as it hardens to set securely and lock in place for strong support. Average set time = 20 minutes
-
NorthRock® River Cobble
TCC Materials® NorthRock® River Cobble (BOM #103787) is a 2" rock that helps retain moisture and can prevent weed growth. It makes for a great decorative accent to any garden and is intended for use in yards or around ponds. It provides lasting beauty and comes in ½ cubic foot bags for ease in placement. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Sakrete® Concrete Glue
Sakrete® Concrete Glue (BOM #120033) is an acrylic cement modifier used as a surface primer or as a bonding additive to enhance strength, adhesion, abrasion resistance, and freeze-thaw resistance of concrete.
-
Akona® Instant Patching Cement
Akona® Instant Patching Cement (BOM #102632) is a high-performance cement used for filling wide cracks and other concrete repair needs. It sets rock hard in just 90 minutes. Akona Instant Patching Cement self-bonds to all properly-prepared concrete surfaces and develops twice the strength of ordinary concrete.
-
NorthRock® River Pebble
NorthRock® River Pebble (BOM #103786) is a ¾" rock that helps retain moisture and can prevent weed growth. It makes for a great decorative accent to any garden and is intended for use in yards or around ponds. It provides lasting beauty and comes in ½ cubic foot bags for ease in placement. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Quikrete® Fast-Setting Concrete Mix
Quikrete® Fast-Setting Concrete Mix (BOM #100166) is a special blend of fast-setting cements, sand and gravel designed to set hard in approx. 20 to 40 minutes. Sets posts without mixing. Pour dry mix into hole and soak with water. Use for setting fence posts, mailbox posts, basketball posts, deck posts, or lamp posts. Or use to construct new steps, sidewalks, or concrete appliance pads.
-
SAKRETE® Concrete Mortar Dissolver
Sakrete® Concrete Mortar Dissolver is a safe, environmentally-friendly liquid alternative to aggressive acid concrete removers. Use to remove cured cement, concrete, mortar or stucco from most surfaces. Available in 28 oz. bottle (BOM#120043), 1 gal. bottle (BOM#121120), and 5 gal. pail (BOM#121130).
-
TCC Materials® Tube Sand
TCC Materials® Tube Sand is ideal for adding weight and traction to your vehicle in winter driving conditions. The tube-shaped bag fits along wheel wells, above the rear axle, or in pick up truck beds. The sand is dried and in a weather-proof bag to resist freezing. Available in 60 lb. bags (BOM #106610).
-
Akona® Instant Post Cement
Akona® Instant Post Cement (BOM #102631) is used for quick setting of all metal, wood and plastic fence, mailbox, basketball and swing set posts. This product does not require pre-mixing prior to use. Simply pour dry mix into the hole with water as directed. Instant Post Cement does not require bracing and sets in approximately 10-20 minutes. Akona Instant Post Cement is not designed to be used for footings or structural supports.
-
NorthRock® River Rock
NorthRock® River Rock (BOM #106097) is a 1½" rock that helps retain moisture and can prevent weed growth. It makes for a great decorative accent to any garden and is intended for use in yards or around ponds. It provides lasting beauty and comes in ½ cubic foot bags for ease in placement. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Quikrete® Glass Block Mortar
Quikrete® Glass Block Mortar (BOM #100710) is a specifically formulated blend of white sand, cement, lime and other waterproof additives designed to provide a decorative, waterproof joint. Exceeds the performance requirements of ASTM C270 for Type S Mortar. Just add water.
-
Sakrete® Concrete & Mortar Repair
Sakrete® Concrete & Mortar Repair Tube (BOM#121098) is a weather-resistant, latex-based polymer used for repairing deteriorated mortar joints or cracks in concrete.
-
Akona® Instant Water Stop
Akona® Instant Water Stop is a quick-setting, hydraulic cement compound used primarily as a water stop or hole filler on concrete or masonry materials. It is formulated to expand when set and locks into place to block flowing water within 3 to 5 minutes. Instant Water Stop bonds to wet walls and is ideal for patching cracks and leaks in swimming pools and is available in 10 lb. bags (BOM #102635) and 25 lb. bags (BOM #102636)
-
NorthRock® Weed-Blocker
Weed-Blocker Paver Locking Sand (BOM #109551) is a specially formulated polymer modified joint sand for use with pavement systems utilizing segmental concrete pavers, clay pavers or natural stone; concrete slab joint applications or filling gaps between segmental retaining wall blocks. Designed for average joint widths of 1/4" to 3/8" wide, Paver Locking Sand becomes activated when combined with water, and needs to be applied as a dry polymeric sand to dry surfaces.
-
Quikrete® Mason Mix
Quikrete® Mason Mix (BOM #106514) is a high strength Commercial Grade dry pre-blended mixture of sand and cements specially selected for masonry applications. Meets N, S, M requirements as specified in ASTM C270. Just add water. Also available in a 60 lb. bag (BOM #105673) at some locations.
-
SAKRETE® Concrete Repair
Sakrete® Concrete Repair Tube (BOM#121099) is a weather-resistant, latex-based polymer used for filling cracks in concrete.
-
WESTERN LIME MIRACLE HYDRATED MASONRY LIME – TYPE S
Type S Dolomitic Hydrated Masonry Lime (BOM #101062) meets ASTM C207 and is available in 50 lb. bags. For more information on our lime, please contact your sales representative.
-
Akona® Liquid Air Entraining Admixture
Akona® Liquid Air Entraining Admixture (BOM #103941) is a ready-to-use, aqueous solution made of organic materials. Akona Liquid Air Entraining Admixture entrains a small and stable amount of air into the desired mix. These small, stable air voids enhance the mixture and improve workability. Its chemical composition and physical properties make it ideal for many construction applications. It is intended for use when increased workability and freeze-thaw durability of concrete or mortar is preferred. This admixture also improves resistance to freeze/thaw, scaling, segregation, and bleeding and improves strength, plasticity, water retention, and cohesiveness of mortar. Meets ASTM C260 Standard Specification for Air-Entraining Admixtures for Concrete.
-
NorthRock® Western Sunset
NorthRock® Western Sunset Rock (BOM #100609) is a blend of vibrant colors to make your landscape project look sharp. The natural beauty of Western Sunset will not fade and can be used in place of mulch or alternative ground cover. **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Sakrete® Crack Resistant Concrete Mix
Formulated to reduce the risk of surface shrinkage cracks, Sakrete Crack Resistant Concrete Mix is a professional strength blend of cementitious materials, sands, stone and fibers. For repair and building jobs where concrete thickness exceeds 2”.
-
Akona® Mortar Repair
Akona® Mortar Repair (BOM #103174) is designed for tuck-pointing, repairing, and sealing mortar joints and cracks in masonry units such as stone, brick and block walls. The product is gray in color and designed to blend in with the texture of surrounding mortar. Our durable, pre-mixed Mortar Repair is a sanded, latex-based polymer formulation that dries quickly, is paintable, and provides superior adhesion to masonry.
-
NorthRock® White Marble
TCC Materials® NorthRock® White Marble (BOM #100615) offers a clean, bright alternative to River Rock or mulch. White Marble is great for landscaping, and is also commonly used for interior decorative projects, crafts, and aquariums. **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**
-
Quikrete® Mortar Mix – Type N
Quikrete® Mortar Mix (BOM #100533) is a blend of masonry cement and graded sand, designed to meet ASTM C 270 for Type N Mortar. Just add water and mix to construct or repair block, brick, or stone structures like walls, pillars, barbecues, planters, and for tuck-pointing mortar joints.
-
Sakrete® Cure ‘N Seal (WB)
Sakrete® Cure 'N Seal (WB) (BOM #120045) is a clear, non-yellowing, waterborne, acrylic polymer modified resin compound used for curing, sealing, and hardening freshly placed concrete. Also used to seal, protect, and dustproof existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.
-
Tenon® Cure & Seal WB
Tenon® Cure & Seal WB is a clear, non-yellowing, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Waterborne mixture passes VOC compliance laws. Available in 1 gal. bottle (BOM #120823), 5 gal. pail (BOM #120822), and 55 gal. drum (BOM #120824).
-
Akona® Non-Shrink Grout (6,700 PSI)
Akona® Non-Shrink Grout (BOM #104953) is a pre-blended, pourable, non-metallic, Portland-cement based material used for grouting steel columns, bearing plates, precast concrete and anchors. Our Non-Shrink Grout compensates for an uneven foundation, distributes the weight of the unit, and prevents shifting after settling and leveling the unit. Akona Non-Shrink Grout is composed of aggregates, Portland cement and other additives to create an interior or exterior grout with non-shrinking characteristics capable of handling high-load transfers. Meets ASTM C1107 and is MN, WI, and NE DOT approved.
-
Quikrete® Play Sand
Quikrete® Premium Play Sand® (BOM #101043) is a specially-graded, washed sand that has been dried and screened, for children’s sand boxes.
-
Sakrete® Fast Setting Cement Patcher
Sakrete® Fast Setting Cement Patcher is used for horizontal, vertical, and overhead repairs where an accelerated set-time is needed. Use for applications of ½ inch featheredge. Fast Setting Cement Patcher is available in a 50 lb. pail (BOM #120029), and a 10 lb. box (BOM #120028).
-
SPEC MIX® Adhered Veneer Mortar
SPEC MIX® Adhered Veneer Mortar (AVM) is a blend of dry cementitious materials and masonry sand specifically designed to provide superior bond for precast, lightweight masonry veneer units to base surfaces, and is also offered with integral color. TCC Materials offers Adhered Veneer Mortar in Type N (BOM #109302) and Type S (BOM #109454) This product meets ASTM C270 and ASTM C 1714, and CSA A 179 for Type S mortar including ACI 530 shear strength requirements. Also available in 3,000 lb. bulk bags Type N (BOM #109559) and Type S (BOM #109557) to work with our silo system. Please contact your salesperson for more information.
-
Akona® Polymer-Modified Concrete Resurfacer
Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength product has superior bond and is trowelable to from 1/4 in. down to 1/8 in. (6 to 3 mm). It may be trowel or broom finished, and is available in a 25 lb. bag (BOM #102642).
-
Quikrete® Polyurethane Construction Adhesive
Quikrete® Polyurethane Construction Adhesive (BOM #102353) is a high-performance, construction-grade adhesive designed for permanently bonding concrete, brick, marble, stone, wood, glass, aluminum, steel, PVC and tile. Ideal for bonding retaining wall block and caps, repairing broken concrete, or adhering signage and other items to concrete.
-
Sakrete® Fast-Setting Concrete Mix
Sakrete® Fast-Setting Concrete Mix (BOM #120019 = 50 lb. pail / #106576 = 50 lb. bag) sets posts and poles quickly and easily, even without blending the material. Sets in just ½ an hour so that no bracing is needed and exceeds the strength requirements of ASTM C 387. Fast-Setting Concrete Mix is intended for applications requiring at least 2 inches in thickness.
-
TechMix® Multi-Purpose Utility Sand
TechMix® Multi-Purpose Utility Sand (BOM #101004) is produced from high-purity industrial quartz for a use in a wide variety of applications that require a chemically inert, durable structural filler such as floor overlays, finish coat stucco, and sports turf. With consistently uniform grain shapes and particle distribution, this basic building material offers excellent compaction, placement, and mechanical properties. The high silica content is combined with low level soluble ions, alkalis, and alkaline oxides to provide non-reactive service in most corrosive and exposed environments.
-
Akona® Gray Pourable Concrete Crack Filler
Akona® Gray Pourable Concrete Crack Filler is a ready-mixed, easy-to-apply, pourable material for filling cracks up to ¼" deep x ¼" wide. Gray in color to blend with concrete surfaces and flexible to conform to movements of active cracks, Concrete Crack Filler is ideal for horizontal concrete surface such as driveways, sidewalks, patios and garage floors. Available in 1 gal. bottles (BOM #102639) and 1 qt. bottles (BOM #102638). For larger cracks and holes, use Akona Vinyl Cement Patch.
-
Quikrete® Polyurethane Non-Sag Sealant
Quikrete® Polyurethane Non-Sag Sealant (BOM #102351) is a high-performance, construction-grade polyurethane sealant designed for vertical and overhead surfaces. The non-sag formula provides superior adhesion and flexibility and is ideal for filling and sealing cracks and expansion joints in concrete, stucco, or masonry or for sealing around window and door openings. Meets ASTM C 920, Type S, Grade NS.
-
Sakrete® Fast Setting Repair Mortar
Sakrete® Fast Setting Repair Mortar (BOM #120371) is a fast-setting, high-strength patching material for both interior and exterior concrete surfaces. The convenient zip-pouch package is designed with the do-it-yourselfer in mind for smaller repair projects. Just add water and mix in the bag to create a workable mixture with excellent bonding characteristics. Trowel apply over existing concrete surfaces from a featheredge to 2" thickness to fix minor blemishes. Use for vertical, horizontal, and overhead repairs to pavement, curbs, steps, and more. Sakrete Repair Mortar can be shaved and sanded to shape. Sets up in 10-12 minutes.
-
SPEC MIX® Stone Veneer Mortar – Scratch Base
SPEC MIX® Scratch & Base Mortar (BOM #108540) is a blend of dry, cementitious materials and masonry sand specifically designed for superior bond and durability. Use SPEC MIX® Scratch & Base as a base coat for attaching precast, lightweight masonry units over wood and lath, concrete or masonry substrates. TCC Materials also offers SPEC MIX® Scratch & Base with integral color. Also available in 3,000 lb. (BOM #109009) bulk bags to work with our silo system. Please contact your salesperson for more information.
-
Tenon® Feather Patch Pro
Tenon® Feather Patch Pro is a fast-setting, polymer-modified, self-drying, cement-based patch and skim coating compound for interior use under ceramic tile, hardwood flooring, carpet and a wide array of floor coverings. Ideal for deeper patching, this product can be applied from feather-edge to 2 in. (51 mm) thick. Formulated for exceptional bond strength and superior workability, can be applied to concrete with a relative humidity (RH) up to 90%. Rapid-setting, with initial set in 15 minutes; can accept ceramic tile and stone applications, as well as moisture-sensitive floor coverings, in as little as 30 minutes or when completely dry. Available in 10 lb. (4.5 kg) pails (BOM #120618), and 25 lb. (11.3 kg) pails (BOM #120541).
-
Akona® Pre-Mixed Concrete & Stucco Patch
Akona® Pre-Mixed Concrete & Stucco Patch is a water-based formula intended to patch minor cracks, holes, and surface defects in concrete or stucco. Product may also be used for residential repairs of masonry walls and re-applying small broken pieces of concrete or tuck pointing brick mortar joints. Pre-Mixed Concrete & Stucco Patch offers superior adhesion and may be used for vertical or horizontal patches. Available in 1 quart tub (BOM #103962) and 1 gallon pail (BOM #120713).
-
Quikrete® Polyurethane Self-Leveling Sealant
Quikrete® Polyurethane Self-Leveling Sealant (BOM #102352) is a high-performance, construction-grade, polyurethane sealant used for sealing cracks and joints in horizontal concrete surfaces. This self-leveling formula provides superior adhesion, flexibility and durability and is ideal for sealing expansion joints and crack in concrete floors, driveways, patios, steps, basements, and pool decks. Meets ASTM C 920 Type S, Grade P, Class 25.
-
Sakrete® Fast Setting Self-Leveling Resurfacer
Sakrete® Fast Setting Self-Leveling Resurfacer (BOM #120423) is a rapid setting cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for residential and light foot traffic industrial floors where a hard, flat, and smooth surface is desired. Applications from 1/8" to 1" and can be featheredged to adjoining elevations.
-
TechPro® Heavy-Duty Stone Veneer Mortar
TechPro® Heavy-Duty Stone Veneer Mortar (BOM #120444) is a high-yield, lightweight, high-performance, polymer-modified, fiber-reinforced, Portland-cement based mortar for adhered installation of masonry veneer stone and natural stone. 25% lighter than traditional mortars with excellent non-sag and non-slump handling characteristics. Special admixtures help create both a mechanical and chemical bond to the substrate, significantly outperforming standard mortars. TechPro Heavy-Duty Stone Veneer Mortar is "Step 2" of the TechPro stone installation system used to create decorative exterior and non-load bearing interior veneer walls.
-
Akona® Medium-Duty Refractory Mortar
Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQ's, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.
-
Quikrete® Precision Non-Shrink Grout
Quikrete® Non-Shrink Precision Grout (BOM #100713) is a high-strength, non-metallic grout designed for precision grouting and general construction applications. Simply add water and mix to obtain flowable properties and high strengths. Its non-shrink characteristics make it stable and capable of handling high load transfers. This grout can be mixed to a plastic, flowable or fluid consistency to for grouting pre-cast concrete, heavy equipment, bearing plates, steel columns, and anchoring applications. At 28 days the compressive strengths reach 14,000 psi at a plastic consistency, 12,000 psi at a flowable consistency, and 8000 psi at a fluid consistency. Complies with ASTM C1107 and Army Corp of Engineers CRD 621.
-
Sakrete® Flo-Coat Concrete Resurfacer
Sakrete® Flo-Coat Concrete Resurfacer (BOM #120034) is a polymer-modified sand and cement mix for resurfacing concrete from 1/8 inch to 1/4 inch depth. Can be applied in a flowable consistency using a squeegee or in a stiffer consistency using a trowel.
-
TechMix® Pool Filter Sand
TechMix® Pool Filter Sand (BOM #100468) is a finely-graded, clean, dry, silica sand specially formulated for use in swimming pool filters.
-
Akona® Self-Leveling Floor Underlayment Cement
Akona® Self-Leveling Floor Underlayment Cement (BOM #104623) is a free-flowing mortar for use where a level surface is necessary prior to installing floor coverings. This ground-breaking formula has a dry, integral primer mixed so you no longer need to spend the additional money, time, and labor on adding an additional primer liquid. Our Self-Leveling Floor Underlayment Cement requires a minimum amount of labor to produce a smooth, level surface that is ready for installing floor coverings such as ceramic tile, marble, wood and carpet within 24 hours and resilient flooring after 72 hours. It is also ideal for encapsulate radiant heating installations. This product is designed for interior applications from ⅛" up to 1" thick.
-
Quikrete® Sand Mix
Quikrete® Sand/Topping Mix (BOM #101231) consists of a uniformly-blended mixture of Portland cement, commercial-grade sands and other approved ingredients. Just add water and mix to repair or top damaged concrete surfaces less than 2" thick.
-
Sakrete® Form Release Oil
Sakrete® Form Release Oil (BOM #120044) is a release agent for use with concrete forms. Allows forms to be removed earlier and easier, yet has only a light residue.
-
TechMix® Portland-Limestone Cement – Type IL
Tech-Mix® Portland-Limestone Cement IL is used to make concrete for a variety of building construction, repairs, stucco, or mortar applications such as sidewalks, floors, footings, patios, and setting posts, block, and brick. Tech-Mix Portland-Limestone Cement is available in 92.6 lb. bags (BOM #100908), 46.2 lb. bags (BOM #100910), and 2000 lb. bags (BOM #108140).
-
Tenon® Instant Anchoring Cement
Tenon® Instant Anchoring Cement is a quick-setting, anchoring cement compound used for setting poles, railings, bolts, and fixtures in concrete or masonry. Suitable for interior or exterior use. Expands as it hardens to set securely and lock in place for strong support. Any metals that will corrode when exposed to wet cement, such as aluminum, must be protected. Available in 10 lb. (BOM #129940) and 50 lb. pails (BOM #120998).
-
Akona® Vinyl Cement Patch
Akona® Vinyl Cement Patch is ideally suited for repairs to damaged concrete steps, sidewalks, driveways, patios, curbs, walls and floors. This product contains unique polymers that give it twice the strength and three times the adhesion of conventional concrete. Just add water and mix for an easy-to-use product which can be troweled to a feather edge on interior and exterior concrete applications. For resurfacing large areas, use Akona Polymer-Modified Concrete Resurfacer. Akona® Vinyl Cement Patch is available in 3 convenient sizes: 10 lb bag (BOM #102633), 25 lb bag (BOM #102634), and 40 lb bag (BOM #104452).
-
Quikrete® Stucco Base – Pump Grade
Quikrete® Base Coat Stucco - Pump Grade is a Portland cement based stucco, designed to be used as the scratch and/or brown coat in a 3-coat stucco application, or the first coat in a 2-coat application. This product contains special additives which prevent premature loss of mixing water and provide increased workability. This product is intended for use over galvanized expanded metal lath or solid bases such as masonry, cast-in-place or precast concrete. Available in 80# bags (BOM #104298) and 3000# bulk bags (BOM #104346).
-
TechMix® Sand Topping Mix
TechMix® Sand Topping Mix is a uniformly pre-blended Portland cement and sand mixture for placing concrete overlays 2" thick or less. Used for patching and leveling steps, slabs, walks, and floors. Available in 60 lb. bags (BOM #104880).
-
Tenon® Instant Hydraulic Cement
Tenon® Instant Hydraulic Cement is a quick-setting hydraulic cement compound used primarily as a water stop or hole filler. It expands when set and locks into place to block flowing water in 3 to 5 minutes. For use only on concrete and masonry materials. Best for repairing leaks in cracks between blocks or on one surface, not for stopping water flow in corners. Available in 10 lb. (BOM #129950) and 50 lb. (BOM #128280) pails.
-
Akona® Glass Block Mortar
Akona® Glass Block Mortar (BOM # 102627) is a specially-formulated blend of select white silica sands, white cement and workability agents which result in an easy-to-handle, high strength mortar. It is designed for installing glass block windows, shower and bath walls or masonry units where a white mortar is desired. This product is suitable for both interior and exterior applications.
-
Quikrete® Stucco Base Coat – Scratch & Brown
Quikrete® Scratch and Brown Base Coat Stucco (BOM #103191) is a Portland cement-based stucco designed to be used as the scratch and/or brown coat in a 3-coat stucco application, or the first coat in a 2-coat application.
-
Sakrete® High Strength Anchoring Epoxy
Sakrete® High Strength Anchoring Epoxy (BOM #129427) is a two-component epoxy compound that cures to an exceptionally strong, hard product. This unique formulation provides an excellent balance of mixability and flow without run-out to allow for the fastening and anchoring of both vertical and horizontal fixtures into masonry.
-
Tenon® Level-Flo® 100
Tenon® Level-Flo® 100 (BOM #120534) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied from ⅛"-2" (3-51 mm) neat and up to 5" (127 mm) extended.. Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings in 3 days. Use with Level-Flo Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.
-
Akonaflex® Pro Self-Leveling Expansion Joint Filler
Akonaflex Pro Expansion Joint Filler is a superior-grade, one-component, MS polymer sealant and filler to be used in concrete joints as well as a wide variety of substrates. Its semi-self-leveling characteristics provide a smooth finish which makes it ideal for filling cracks or gaps on horizontal surfaces such as concrete driveways, sidewalks, patios, steps, garage floors, above ground foundations, and other concrete surfaces. Fills expansion joints up to 2.5 in. wide x 1.5 in. deep, and contains a unique, specially-formulated technology which allows it to be exposed to water after only 2 hours without washing out. Reaches full cure after 24 hours. Won’t crack or shrink and acts as an excellent waterproof seal. Available in 2 convenient sizes: 10 oz. tubes (BOM #104560); and 29 oz. tubes (BOM #120440).
-
Quikrete® Stucco Finish Coat
Quikrete® Stucco Finish Coat White (BOM #100678) is a Portland cement based stucco finishing plaster designed for use as the color and texture coat over Portland cement base coat or fiberglass reinforced stucco. Requires only the addition of water.
-
Sakrete® High Strength Concrete Mix
Sakrete® High Strength Concrete Mix (BOM #100171 = 60 lb. bag / #120021 = 50 lb. pail / #101090 = 80 lb. bag) is designed for anchoring posts and poles, and pouring footings and slabs. High Strength Concrete Mix is premium quality for consistent strength and durability and meets ASTM C 387 strength requirements for structural applications. Uses include building walks, drives, slabs and steps as well as anchoring posts and poles. High Strength Concrete Mix is for applications requiring at least 2 inches in thickness. Just add water, mix, and use.
-
Tenon® Level-Flo® 200
Tenon® Level-Flo® 200 (BOM #120535) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. Can be applied from ⅛"-2" (3-51mm) neat, and up to 5" (127 mm) extended. Fast-setting, accepts non-moisture sensitive tile and stone in as little as 4 hours, and moisture sensitive floor coverings in 16-24 hours. Use with Level-Flo Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.
-
Akonaflex® Self-Leveling Concrete Repair
Akonaflex® Self-Leveling Concrete Repair is a one-component, construction-grade, polyurethane, moisture-cure sealant designed to meet the flexibility requirements of dynamically moving joints. Self-leveling to result in a smooth, gray finish which is foot-traffic ready after 3 days and will reach full cure in 1 week. Fills and seals horizontal joints up to 1½"W x ½"D on concrete slabs, driveways, sidewalks, decks, pitch pans, pavers, garage floors, industrial floors and other concrete surfaces. Its premium-grade components give you a strong, durable, flexible, waterproof seal and leaves a finish that can be painted once cured with a latex paint. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant. Available in 2 convenient sizes: 10 oz. tubes (BOM #104562); and 29 oz. tubes (BOM #120456).
-
Quikrete® Surface Bonding Cement
Quikrete® Quikwall Surface Bonding Cement is an alkali-resistant, fiberglass-reinforced, Portland cement based, surface bonding cement used for construction of dry-stack (without mortar) cement block walls. Available in Gray (BOM #101359) and White (BOM #100246). Add color with Quikrete® Stucco & Mortar Color.
-
Sakrete® Leak Stopper Hydraulic Cement
Sakrete® Leak Stopper Hydraulic Cement (BOM #120030) stops the flow of water through breaks in concrete or masonry walls and floors. Rapid setting, with initial set-time of 1-3 minutes, and final set in 3-4 minutes.
-
Tenon® Level-Flo® 300
Tenon® Level-Flo® 300 (BOM #120536) is a high-performance, high-strength, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. It’s designed for maximum flow and seamless merging with every pour and is ideal for fast track applications.
-
Akonakote® Pourable Concrete Patch
Akonakote® Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.
-
Akonaseal® Non-Sag Masonry/Joint Sealant
Akonaseal® Masonry/Joint Sealant (BOM #104561) is a premium-grade, multipurpose, moisture-cure sealant, designed to meet the flexibility requirements of dynamically moving cracks and joints, this texturized, gray mortar-colored sealant is ideally suited for vertical concrete, stucco or masonry applications with a maximum joint of 1½"W x ¾"D and can be painted with a latex paint when cured. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant.
-
Quikrete® Vinyl Concrete Patcher
Quikrete® Vinyl Concrete Patcher is a multi-purpose concrete repair material with strong adhesive properties which trowels to a feather edge of 1/16" (1.6 mm) and is made of a special blend of exterior-grade vinyl resin, fine sand, and Portland cement. Just add water. Available in 40 lb. bags (BOM #100472), 20 lb. pails (BOM #100131), and 10 lb. pails (BOM #109334).
-
SAKRETE® Mortar Repair
Sakrete® Mortar Repair Tube (BOM#121119) is a weather-resistant, latex-based polymer used for repairing deteriorated mortar joints or cracks in walls.
-
Sakrete® Mortar-Stucco Mix Type S
Sakrete® Mortar-Stucco Mix Type S is a contractor-grade mortar mix for laying brick, block, and stone in load-bearing walls and construction above or below grade level. It can also be used as a scratch and brown coat in stucco application. Just add water, mix, and use. Available in 80 lb. bag (BOM #100531) and 50 lb. pail (BOM #120023)
-
Techmix® White Portland-Limestone Cement – Type 1
TechMix® White Portland-Limestone Cement – Type I (BOM #112770) is used to produce a wide variety of architectural concrete products and applications. General applications include cast in place or precast wall panels, floors, slabs, terrazzo, thin set and tile grouts, cast stone, masonry units and mortars, stucco, swimming pools & spas, glass fiber reinforced concrete, ornamental statuary, floor tiles, concrete roof tiles, perimeter security, pavers and traffic safety items such as concrete median barriers, bridge parapets, pedestrian crosswalks, curbs and other delineators. White cement is often used to produce bright finishes, vibrant colors or ultra-high performance concretes that look great and provide structural performance that make them ideal for resilient building applications. White Portland-Limestone Cement meets ASTM C150 Standard Specification for Portland Cement, as well as AASHTO M85 and CSA A3001 specifications.
-
Sakrete® Non-Shrink Construction Grout
Sakrete® Non-Shrink Construction Grout (BOM #120024) is a non-shrink, non-metallic, Portland cement based material with special additives designed with high flexural and compressive strength to handle high-load transfers. Used for grouting of machinery bases, bearing plates, pre-cast concrete, columns, beams and other anchoring applications.
-
Sakrete® Non-Shrink General Purpose Grout
Sakrete® Non-Shrink General Purpose Grout (BOM #120025) is a commercial grade non-metallic Portland cement based structural hydraulic cement for high-strength grouting.
-
SAKRETE® Polyurethane Non-Sag Sealant
Sakrete® Polyurethane Non-Sag Sealant (BOM#121095) is a one-component sealant that forms a flexible joint with excellent adhesion for horizontal or vertical applications.
-
SAKRETE® Polyurethane Self-Leveling Sealant
Sakrete® Polyurethane Self-Leveling Sealant (BOM#121097) is a one-component, self-leveling sealant for filling cracks or joints in horizontal applications.
-
TechPro® Moisture Barrier
TechPro® Moisture Barrier (BOM #127610) is an advanced, latex, polymer-based technology used as a water-resistant membrane applied to all wood or moisture-sensitive backup walls prior to application of TechPro Polymer-Modified Stone Veneer Base Coat. Ready to use (no mixing required), with exceptional flexibility and elongation, solvent free and VOC compliant, TechPro Moisture Barrier is part of the TechPro veneer stone installation system. Color will be light orange when applied, dries to dark orange.
-
Sakrete® Portland Cement Type IL
Sakrete® Portland Cement (BOM #120022) is a Type IL gray cement. A basic building material, when blended with sand, stone or gravel it is used for pavement, sidewalks, slabs and more.
-
Sakrete® Pourable Concrete Patch
Sakrete® Pourable Concrete Patch (BOM #120037) is a flowable, squeegee-grade, polymer-modified mix for patching and resurfacing concrete up to ½ inch depth.
-
Sakrete® Pre-Mixed Concrete Patch
Sakrete® Pre-Mixed Concrete Patch (BOM #120547) is used for filling and sealing cracks in concrete up to 1 inch wide. Smooth minor surface defects and holes.
-
Tenon® Paver Guardian WB
Tenon® Paver Guardian WB is designed to protect & extend the life of installed pavers, retaining walls and other cementitious surfaces without affecting the finished look. Paver Guardian WB provides a natural finish that maintains the original look of pavers, concrete, architectural concrete, brick, natural stone, and other cementitious materials. This clear, water-bourne formula penetrates and reacts chemically within the capillaries of the surface to protect against deicing salts, moisture penetration, spalling, freeze-thaw damage, efflorescence, and chemical erosion. Paver Guardian WB also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Paver Guardian WB is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottle (BOM #129780), 5 gal. pail (BOM #129790), or 55 gal. drum (BOM #129576).
-
Sakrete® Pro-X180 Rapid Strength Concrete Mix
Sakrete® Pro-X180 Concrete Mix (BOM #110764) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprientary performance additives designed to provide extended working time and high early strength for concrete applications requiring a mininum thickness of 1-1/2". Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack-resistance and increased toughness.
-
Sakrete® Rapid Setting Anchoring Epoxy
Sakrete® Rapid Setting Anchoring Epoxy (BOM #129428) is a two-component epoxy compound used to anchor bolts or other metal objects in concrete and masonry. A rapid setting material that can be used in vertical or horizontal applications. Its rapid set allows for use in walls with minimal run-out.
-
Sakrete® Sand Mix
Sakrete® Sand Mix (BOM #100397) is a quality mixture of sand and cement designed to be used as a topping mix to rejuvenate damaged concrete surfaces or as a bedding mix and joint grout for flagstone, slate, and brick walkways. Sand Mix can be applied in layers ranging from ½ to 2 inches thick and exceeds the strength requirements of ASTM C 387. Just add water, mix, and use.
-
Tenon® Paver Seal & Shine Pro WB
Tenon® Paver Seal & Shine Pro WB is a penetrating, breathable, waterborne sealer designed to protect & extend the life of installed pavers, while enhancing the color and adding a “wet-look” gloss. Made with a durable acrylic that does not yellow when exposed to the sun's UV rays, it penetrates deep in the capillaries of the paving stones for increased protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. Paver Seal & Shine Pro WB will enhance the beauty of pavers, colored or stamped concrete, or exposed aggregate by giving it a “wet-look” finish while protecting surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants and making these surfaces easier to clean. Available in 1 gal. bottle (BOM #129710), 5 gal. pail (BOM #129700), or 55 gal. drum (BOM #129545).
-
Sakrete® Self-Leveling Underlayment
Sakrete® Self-Leveling Underlayment (BOM #120035) is a polymer-modified Portland cement based self-leveling underlayment for interior applications up to 1 inch in a single pour. For use over properly prepared concrete and plywood floors. Can be used under ceramic tile, stone, carpeting, VCT, wood flooring and other materials. Not designed as a direct wearing surface. May also be used to encapsulate radiant heating installations.
-
Sakrete® Stone Veneer Mortar
Sakrete® Stone Veneer Mortar Mix (BOM #105167) is a polymer-modified contractor grade mortar specifically designed to adhere manufactured or artificial stones in vertical applications. Just add water and mix to use.
-
Tenon® Paver Wash
Tenon® Paver Wash is a mild, phosphoric product that dissolves and removes efflorescence (white mineral deposits) and rust stains from pavers and other cementitious or clay surfaces. This product is recommended to be used before applying a sealer to the surface of pavers in order to enables the sealer to penetrate and seal more effectively. Available in 1 gal. bottle (BOM #129800) or 5 gal. pail (BOM #129810).
-
Sakrete® Top ‘n Bond Concrete Patcher
Sakrete® Top 'n Bond Concrete Patcher (BOM #120031 = 10 lb. / #120032 = 50 lb.) is a polymer-modified sand-cement repair mortar for resurfacing, patching, and general concrete repairs from ½ inch to featheredge. Requires only the addition of water.
-
TechPro® Polymer-Modified Stone Veneer Base Coat
TechPro® Polymer-Modified Stone Veneer Base Coat (BOM #120442) is used as a scratch and base coat for real or manufactured stone veneer units. Also referred to as a cement plaster coating, it is a blend of cementitious materials, dried sand, and special performance admixtures designed to produce a highly-bondable substrate and to optimize consistency between batches. Special admixtures help create both a mechanical and chemical bond to the substrate with excellent workability and non-sag performance. Polymer-modified, mix with water only. "Step 1" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls. Can be applied over TechPro Moisture Barrier or directly to fully cured concrete.
-
Akona® Epoxy Tube Nozzles (2-Pack)
Akona® Epoxy Tube Nozzles are intended to provide customers additional nozzles for use with epoxy tube products. Both the original nozzle and the replacements are one-time use nozzles which should be discarded after use. This solves the issue when customers use only a portion of the product, but have to discard of the original one-time use nozzle. This product comes in packs of 2 tubes per bag.
-
Sakrete® Trowelable Blacktop Repair
Sakrete® Trowelable Blacktop Repair (BOM #120038) is for filling and sealing cracks up to 1 in. wide in blacktop surfaces and for repairs to rough surfaces. Pre-mixed, use directly from the container.
-
Tenon® Refractory Mortar
Tenon® Refractory Mortar is a specially-engineered blend of specific cements and aggregates giving the mortar unique heat-resistance and thermal characteristics for use in high-temperature applications such as inside fire pit rings, setting chimney clay flue liners, parging a smoke chimney chamber, and setting fire bricks. Passes ASTM C 199 for mortar temperature limits to 2,550°F for a minimum of 6 hours.
-
Tenon® Salt Barrier WB
Tenon® Salt Barrier WB is designed to protect & extend the life of concrete, masonry, pavers, retaining walls and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier WB provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surfaces. This clear, water -based formula penetrates and reacts chemically within the capillaries of the surface to protect against deicing salts, moisture penetration, spalling, freeze-thaw damage, efflorescence, and chemical erosion. Salt Barrier WB also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Salt Barrier WB is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottle (BOM #129840), 5 gal. pail (BOM #129580), or 55 gal. drum (BOM #129587).
-
TechPro® Stone Veneer Joint Grout
TechPro® Stone Veneer Joint Grout is a mixture of dry cementitious materials and dried sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water only. "Step 3" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls. Available in 4 colors to compliment or contrast veneer units: Gray (BOM #120446); Brown (BOM #120449); Tan (BOM #120448), White (BOM #120447); and Charcoal (BOM #130110).
-
TechPro® Stone Veneer Sealant
TechPro® Stone Veneer Sealant is a one-component, high-performance, non-priming, gun-grade, polyurethane elastomeric sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry. Available in 5 colors to coordinate with TechPro Stone Veneer Grout: Gray (BOM #120450); Brown (BOM #120453); Tan (BOM #120452), White (BOM #120451); and Charcoal (BOM #130100)
-
Tenon® Vinyl Concrete Patch
Tenon® Vinyl Concrete Patch a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather-edge to 2 in. (51 mm) thick per lift. Typically supports foot traffic in 8-12 hours, wheeled traffic in 48 hours. Available in 10 lb. pail (BOM #127634) and 50 lb. bag (BOM #120681).
-
Tenon® Waterproofing & Crack Isolation Membrane
Tenon® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675) and 5 gal. (BOM #120676).