Waterproofing

  • Quikrete® FastSet Water-Stop Cement

    High Performance Cement FastSet™ Water-Stop Cement (BOM #113205) is a rapid setting, high strength repair material designed to plug leaks instantly in concrete and masonry. FastSet™ Water-Stop Cement will block running water when application is made to masonry or concrete surfaces. This special formulation allows the product to obtain high strength and rapid setting while repelling water. FastSet™ Water-Stop Cement solves leakage problems wherever active water is present, in all masonry and concrete above and below grade. Use FastSet™ Water-Stop Cement for sealing around concrete pipes and for plugging leaks in: • Foundation and retaining walls • Chimneys • Swimming pools, fountains and cisterns

  • Akona Heavy-Duty Waterproofing Base Coat

    Akona® Heavy-Duty Waterproofing Base Coat

    Akona® Heavy-Duty Waterproofing Base Coat (BOM #102624) is a Portland cement-based, waterproof coating for use over concrete, block, brick or stucco surfaces. Use for interior or exterior coating of foundation, basement or retaining walls below or above grade. When applied over non-uniform areas, this product provides a smooth or textured surface that can be left as a finished decorative coating. In addition, this product can serve as a base coat for paint or similar faux finishes. Please note that this product needs to be mixed with a mixture of water and Akona Concrete Bonding Additive (sold separately, BOM #102659).

  • Akona Instant Water Stop

    Akona® Instant Water Stop

    Akona® Instant Water Stop is a quick-setting, hydraulic cement compound used primarily as a water stop or hole filler on concrete or masonry materials. It is formulated to expand when set and locks into place to block flowing water within 3 to 5 minutes. Instant Water Stop bonds to wet walls and is ideal for patching cracks and leaks in swimming pools and is available in 10 lb. bags (BOM #102635) and 25 lb. bags (BOM #102636)

  • Tenon Instant Hydraulic Cement

    Tenon® Instant Hydraulic Cement

    Tenon® Instant Hydraulic Cement is a quick-setting hydraulic cement compound used primarily as a water stop or hole filler. It expands when set and locks into place to block flowing water in 3 to 5 minutes. For use only on concrete and masonry materials. Best for repairing leaks in cracks between blocks or on one surface, not for stopping water flow in corners.  Available in 10 lb. (BOM #129950) and 50 lb. (BOM #128280) pails. 

  • Sakrete® Leak Stopper Hydraulic Cement

    Sakrete® Leak Stopper Hydraulic Cement

    Sakrete® Leak Stopper Hydraulic Cement (BOM #120030) stops the flow of water through breaks in concrete or masonry walls and floors. Rapid setting, with initial set-time of 1-3 minutes, and final set in 3-4 minutes.

  • Tenon Vertical Concrete Surface Finisher

    Tenon® Vertical Concrete Surface Finisher

    Tenon® Vertical Concrete Surface Finisher is a superior cementitious waterproofing coating for concrete and masonry. It provides a protective and waterproof surface while eliminating the rubbing process. Spray or brush applied, available in light gray (BOM #120765) or white (BOM #120764). For added performance, durability, and improved bonding, Vertical Concrete Surface Finisher is designed to be mixed with Tenon Mighty Bond liquid additive. Vertical Concrete Surface Finisher when mixed with Mighty Bond is approved by MNDOT under Special Surface Finish System.

  • Tenon® Waterproofing & Crack Isolation Membrane

    Tenon® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675) and 5 gal. (BOM #120676).