03.01.00 – Maintenance of Concrete for Rehabilitation

Tenon Concrete Resurfacer

Tenon® Concrete Resurfacer

Tenon® Concrete Resurfacer (BOM #120728) is a fast-setting, high-performance polymer-modified, cement-based product used for resurfacing old concrete to make it look new again. Applications from feather edge to ½ in. (2-13 mm). Fast-drying, walkable on average in 2 hours.

Partial Depth Concrete Patch

Tenon® Partial Depth Concrete Patch

Tenon® Partial Depth Concrete Patch is is ideal for placing overlays less than 2” deep (5 cm). This pre-blended cement and oven dried sand mixture will produce a high-strength concrete repair material that is extremely durable in partial depth applications such as concrete pavements, bridge decks, industrial floors, concrete parking lots and garage decks. It is also used for adhering pavers to concrete steps and walks, patching and/or leveling concrete surfaces, filling large cracks, and filling cores in masonry block or brick. Available in 2:1 mix (BOM #120722), 2.5:1 mix (BOM #120723), or 3:1 mix (BOM #120724) (fine sand aggregate to Portland cement ratio).

Tenon Pourable Concrete Patch

Tenon® Pourable Concrete Patch

Tenon® Pourable Concrete Patch (BOM #120672) is a Portland cement-based, flowable, squeegee-grade, polymer-modified patching and resurfacing mix for interior and exterior horizontal concrete substrates. Easy to use, it corrects defects up to ½ in. (13 mm) on concrete surfaces prior to applying new flooring materials or coatings. Depending on application, can also be used as a wearable surface for residential and light duty commercial applications. Meets ASTM C387 “Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete” for normal weight concrete.

Tenon Rapid Patch 100

Tenon® Rapid Patch® 100

Tenon® Rapid Patch® 100 (BOM #120970) is a fast-setting, fiber-reinforced, high strength, cement-based repair mortar designed for applications where high early strength gain is needed to reduce down time. Apply neat from 1/2" to 2" deep, can be extended for repairs greater than 2" deep. 

Tenon Rapid Patch 200

Tenon® Rapid Patch® 200

Tenon® Rapid Patch® 200 (BOM #120971) is a rapid-setting, fiber reinforced, high strength, polymer-modified cement mortar designed for concrete repair and overlay applications requiring high durability. Apply neat from 1/2" to 2" deep, or can be extended for repairs greater than 2" deep. Wide temperature range for application.

Tenon Surface Bonding Cement CR

Tenon® Surface Bonding Cement CR

Tenon® Surface Bonding Cement CR is a versatile fiber-reinforced, Portland cement-based product used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, repair deteriorated stucco, and in the construction of concrete block walls that are dry stacked (without mortar) above the first course. Special fibers control shrinkage, cracking, and sagging on vertical applications and provides additional overall strength when compared with conventional concrete. Available in Gray (BOM #126197) and White (BOM #120881).

Tenon Underground Utility Mortar

Tenon® Underground Utility Mortar

Tenon® Underground Utility Mortar 50 lb. (BOM #120704) and 80 lb. (BOM #114181) is a is a dry, preblended, air-entrained mortar mix containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. This product meets ASTM C270 and ASTM C1714 requirements.

Tenon Vertical Concrete Surface Finisher

Tenon® Vertical Concrete Surface Finisher

Tenon® Vertical Concrete Surface Finisher is a superior cementitious waterproofing coating for concrete and masonry. It provides a protective and waterproof surface while eliminating the rubbing process. Spray or brush applied, available in light gray (BOM #120765) or white (BOM #120764). For added performance, durability, and improved bonding, Vertical Concrete Surface Finisher is designed to be mixed with Tenon Mighty Bond liquid additive. Vertical Concrete Surface Finisher when mixed with Mighty Bond is approved by MNDOT under Special Surface Finish System.

Tenon Vinyl Concrete Patch - Group

Tenon® Vinyl Concrete Patch

Tenon® Vinyl Concrete Patch a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather-edge to 2 in. (51 mm) thick per lift. Typically supports foot traffic in 8-12 hours, wheeled traffic in 48 hours. Available in 10 lb. pail (BOM #127634) and 50 lb. bag  (BOM #120681).