Commercial Mixes
-
Sakrete® 5000 Plus High Strength Concrete Mix
Sakrete® 5000 Plus Concrete Mix (BOM #120020) is a professional grade concrete mix used for building and repairs greater than 2" depth.
-
Sakrete® Pro-Mix All-Purpose Cement Mix
Pro-Mix™ All-Purpose Cement Mix is a fast setting, high performance concrete repair material that is shrinkage compensating, and high strength. Just add water to produce an easy to use mix ideal for repairs where short down times are critical and high durability and rapid strength are needed. Available in 20 lb. pails (BOM #113014) and 50 lb. bags (BOM #112704).
-
TechPro® Congelz®
TechPro® CONGELZ® Waste Water Solidification is an environmentally-friendly solution to disposing of unwanted rinse water or mortar slurry from any mortar or concrete project. When used as directed, this patented technology transforms rinse water from a liquid to a gel. Passes ASTM 9095B paint filler test, this gel has been determined to be safe and legal for landfill disposal. Using CONGELZ solves the common issues caused by cementitious waste disposal - no more clogged drains or dumping of product on jobsites. Simply add the product to your rinse water, allow to gel, and toss the works in the trash. Available in a 5 lb. box (BOM #121214), 15 lb. box (BOM #121213), and 40 lb. box (BOM #121210).
-
Tenon® Air-Entrained Concrete Patching Mix AE
Tenon® Air-Entrained Concrete Patching Mix AE (3U58M) (BOM #126199) is an ideal material for repairing concrete pavement, bridge decks, industrial floors, concrete parking lots, and garage decks. This pre-blended mixture of cement, aggregate, and special additives will produce a high strength concrete repair material that is extremely durable and works well in harsh environments. Additionally, when used with Tenon Fast-Set Liquid Activator, surfaces can be reopened to traffic within 4 to 5 hours under typical conditions.
-
TCC Materials® Iowa DOT Concrete Patch Mix
TCC Materials® Iowa DOT Concrete Patch Mix (BOM #104912) is a low-slump concrete primarily used for bridge deck overlays and concrete pavements. Produces a high-strength concrete repair material that is extremely durable and works well in harsh environments. Use for both full-depth and partial-depth applications.
-
Quikrete® Concrete Mix
Quikrete® Concrete Mix (BOM #100389) is the original 4,000 psi average compressive strength blend of Portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. Designed for pouring concrete 2" thick or more or building/repairing concrete structures. Available in 80 lb. bags (BOM #100389), 60 lb. bags (BOM #101356), and 40 lb. bags (BOM #104606). Approximate Yield: 80 lbs. = 0.60 cu. ft. 60 lbs. = 0.45 cu. ft.
-
TechMix® Crack-Resistant Concrete Mix
TechMix® Crack-Resistant Concrete Mix (BOM #110260) is a high-strength, pre-blended Portland cement mixture for pouring concrete 2" (5 cm) thick or greater. Crack-Resistant Concrete Mix is air-entrained to increase freeze-thaw durability and fiber-reinforced to reduce shrinkage cracks and improve impact resistance. Meets or exceeds requirements of ASTM C387.
-
TCC Materials® Microsilica Concrete Patching Mix
TCC Materials® Microsilica Concrete Patching Mix (5098SP) is ideal for repairing parking structures, industrial plants, roads, walkways, bridges, tunnels, dams and ramps. This is a pre-blended cementitious mixture that produces a rapid strength gaining concrete repair material that is extremely durable and open to foot traffic in 2 hours or vehicular traffic in 4 hours.
-
TechMix® Fast-Setting Concrete Mix
TechMix® Fast-Setting Concrete Mix (BOM #104877) is a specially formulated accelerated setting, high early strength mortar for use in applications of 2" thick or greater.
-
Quikrete® Crack-Resistant Concrete Mix
Quikrete® Crack-Resistant Concrete Mix (BOM #109358) is a construction grade blend of Portland cement, sand, gravel & special reinforcing fibers to reduce shrinkage cracks and improve impact resistance. Just add water and mix to create for walkways, patios, steps, garage or shed floors.
-
TechMix® High-Strength 5000 Concrete Mix
TechMix® High-Strength 5000 Concrete Mix is a commercial grade blend of aggregate, sand, and Portland cement specifically designed for higher early strength. Ideal for cold-weather applications, it achieves 5,000 psi after 28 days. Used for any application of 2" thick or greater. Available in 60# bags (BOM #101122) and 80# bags (BOM #104882).
-
Tenon® Concrete Patching Mix
Tenon® Concrete Patching Mix (BOM #126198) is a dry mixed combination of Portland-limestone Cement and aggregates that is proportioned and manufactured according to MnDOT specification 3105 for grade 3U18. When mixed according to specifications with water and admixtures, it is an ideal mixture for repairing concrete pavement, industrial floors, and structural concrete.
-
Quikrete® Fast-Setting Concrete Mix
Quikrete® Fast-Setting Concrete Mix (BOM #100166) is a special blend of fast-setting cements, sand and gravel designed to set hard in approx. 20 to 40 minutes. Sets posts without mixing. Pour dry mix into hole and soak with water. Use for setting fence posts, mailbox posts, basketball posts, deck posts, or lamp posts. Or use to construct new steps, sidewalks, or concrete appliance pads.
-
Sakrete® Crack Resistant Concrete Mix
Formulated to reduce the risk of surface shrinkage cracks, Sakrete Crack Resistant Concrete Mix is a professional strength blend of cementitious materials, sands, stone and fibers. For repair and building jobs where concrete thickness exceeds 2”.
-
Sakrete® Fast-Setting Concrete Mix
Sakrete® Fast-Setting Concrete Mix (BOM #120019 = 50 lb. pail / #106576 = 50 lb. bag) sets posts and poles quickly and easily, even without blending the material. Sets in just ½ an hour so that no bracing is needed and exceeds the strength requirements of ASTM C 387. Fast-Setting Concrete Mix is intended for applications requiring at least 2 inches in thickness.
-
TechMix® Portland-Limestone Cement – Type IL
Tech-Mix® Portland-Limestone Cement IL is used to make concrete for a variety of building construction, repairs, stucco, or mortar applications such as sidewalks, floors, footings, patios, and setting posts, block, and brick. Tech-Mix Portland-Limestone Cement is available in 92.6 lb. bags (BOM #100908), 46.2 lb. bags (BOM #100910), and 2000 lb. bags (BOM #108140).
-
Tenon® Metro Mix™
Tenon® Metro Mix™ (BOM #128260) is a high performance concrete mix engineered to meet commercial/industrial ready mix specifications. Super plasticized for higher slump and compressive strengths with corrosion inhibitors. Ideal for projects requiring small structural concrete applications or when ready mix truck access is restricted. Use for structural applications and full depth repairs of 2" (51 mm) or greater. Exceeds ASTM C 387.
-
Tenon® Metro Mix AE
Tenon® Metro Mix AE (BOM #128270) is the air-entrained version of our high performance concrete mix engineered to meet commercial/industrial ready mix specifications. Super plasticized for higher slump and compressive strengths with corrosion inhibitors. Ideal for projects requiring small structural concrete applications or when ready mix truck access is restricted. Use for structural applications and full depth repairs of 1½" (51 mm) or greater. Exceeds ASTM C 387.
-
Tenon® Mighty Bond™
Tenon® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 1 gal. bottles (BOM #120525), 5 gal. pails (BOM #120526) and 55 gal. drums (BOM #130020).
-
Sakrete® Portland Cement Type IL
Sakrete® Portland Cement (BOM #120022) is a Type IL gray cement. A basic building material, when blended with sand, stone or gravel it is used for pavement, sidewalks, slabs and more.
-
Sakrete® Pro-X180 Rapid Strength Concrete Mix
Sakrete® Pro-X180 Concrete Mix (BOM #110764) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprientary performance additives designed to provide extended working time and high early strength for concrete applications requiring a mininum thickness of 1-1/2". Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack-resistance and increased toughness.
-
Sakrete® Self-Consolidating Concrete Mix
Sakrete® Self-Consolidating Concrete Mix (BOM #110768) is a dry, preblended, one-component, self-consolidating, cementious, polymer-modified concrete mix containing coarse aggregate, silica fume, and an integral migrating corrosion inhibitor. Designed for application thickness minimum of 1" and maximum thickness of 8".
-
Tenon® Rapid Patch® 100
Tenon® Rapid Patch® 100 (BOM #120970) is a fast-setting, fiber-reinforced, high strength, cement-based repair mortar designed for applications where high early strength gain is needed to reduce down time. Apply neat from 1/2" to 2" deep, can be extended for repairs greater than 2" deep.
-
Tenon® Rapid Patch® 200
Tenon® Rapid Patch® 200 (BOM #120971) is a rapid-setting, fiber reinforced, high strength, polymer-modified cement mortar designed for concrete repair and overlay applications requiring high durability. Apply neat from 1/2" to 2" deep, or can be extended for repairs greater than 2" deep. Wide temperature range for application.
-
Tenon® Commercial DOT Repair
Tenon® Commercial DOT Repair is a rapid-setting, high-strength, polymer-modified, one-component hydraulic cement mortar designed for concrete repair and overlay applications requiring high durability. Meets or exceeds ASTM C928-R3 Standard Specification for Packaged, Dry, Very Rapid, Hardening Cementitious Materials for Concrete Repair. Resistant to salts, grease, oil, and other chemicals often found in the transportation environment. Rapid Patch Commercial DOT Repair is approved by MNDOT for "Rapid Hardening Materials for Repairs" and WYDOT for "Bridge Concrete Repair". Available in 50 lb. bags "Neat" (BOM # 100689), and "Extended" (BOM #110735).
-
Tenon® Rapid Strength Concrete Mix SE
Tenon® Rapid Strength Concrete Mix SE (BOM #120965) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprietary performance additives designed to provide extended working time and high early strength for concrete applications requiring a minimum thickness of 1.5 in. (38 mm). Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack resistance and increased toughness.
-
Tenon® Self-Consolidating Concrete Mix CI
Tenon® Self-Consolidating Concrete Mix (SCC) CI (BOM #112026) is a dry, preblended, one-component, self consolidating, cementitious, polymer-modified concrete mix containing coarse aggregate, silica fume, and an integral migrating corrosion inhibitor. Designed for application thickness minimum of 1 in. (2.5 cm) and maximum thickness of 8 in. (20 cm). Also available with integral water repellent (IWR) Tenon Self-Consolidating Concrete Mix (SCC) CI/IWR (BOM 114393).