Akona® Concrete Bonding Additive
Akona® Concrete Bonding Additive is an acrylic cement modifier that dramatically improves strength, adhesion, abrasion resistance and freeze-thaw resistance and is ideally suited for use with sand, mortar, cement mixes and selected Akona Repair Products. Akona Concrete Bonding Additive produces a patch that will adhere to old concrete and provides the adhesion required for thin overlays. Available in 1 gal. bottles (BOM #102659) and 1 qt. bottles (BOM #102658).
Akona® Concrete Repair
Akona® Commercial Grade Concrete Repair (BOM #103173) is a flexible, quick-drying, paintable filler and sealant for repairs to vertical and horizontal concrete, masonry, stone, and stucco surfaces. It's gray color and sanded texture is designed to blend in with most standard concrete surfaces.
Akona® Concrete/Masonry Restoration Cleaner
Akona® Concrete/Masonry Restoration Cleaner (BOM #102652) is a mild, acidic product that dissolves and removes efflorescence (white mineral deposits) and rust stains from concrete surfaces, masonry units, pavers, brick, etc. This product is recommended to be used before applying a sealer to the surface of concrete or masonry. This enables the sealer to penetrate and seal more effectively. Use this product before applying Akona Penetrating Paver & Masonry Sealer or Akona Water Based Concrete Sealer. In addition, Akona Surface Concrete Cleaner may be used to prepare the surface of concrete or masonry prior to using Akona Repair Products.
Akona® Concrete/Masonry Set Accelerator
Akona® Concrete/Masonry Set Accelerator (BOM #103963) is an ASTM C494, Type C, non-chloride, non-corrosive, liquid that improves workability and initial strength while it reduces the hydration time of cement. The product is recommended for use during cooler weather to accelerate set time and reduce the risk of frozen mortar and concrete mixes. It is also recommended for use when early strength gain is desired to speed up projects. Akona Concrete/Masonry Set Accelerator provides a reduced curing time, faster set time and increased early strength. The product speeds finishing operations in any weather condition without any corrosive effects.
Akona® Congelz™ Waste Water Hardener
Akona® Congelz™ Waste Water Hardener (BOM #107069) is the perfect method to dispose of unwanted rinse water from any cement or concrete project. Congelz patented technology is great for mortars, stuccos, grouts, patching products, and other similar materials. Using Congelz solves the issues caused by cementitious waste disposal - no more clogged drains or dumping of product on job sites. Simply add the product to your rinse water, allow to harden, and toss the works in the trash! Environmentally safe! Passes EPA 9095.
Akona® Crack-Resistant Surface Bonding Cement
Akona® Crack-Resistant Surface Bonding Cement (BOM #102614) is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete.
Akona® Epoxy Crack Repair
Akona® Epoxy Crack Repair (BOM #120439) is a two-component, high-strength, 100% solids, epoxy repair product designed for injection into horizontal cracks in structural materials including concrete and bricks for the purpose of bonding and sealing. Special no-mess, self-mixing tube for easier application. Use to fill and bond narrow horizontal cracks up to 1/4" (6 mm) wide x 6" (150 mm) deep. Dries clear to light yellow color.
Akona® Fast-Setting Anchoring Epoxy
Akona® Fast-Setting Anchoring Epoxy (BOM #120438) is a two-component, high-performance, 100% solids, high-modulus, non-sag gel epoxy designed for anchoring bolts, railings, dowels, and rebar steel into concrete and to bond or repair a variety of household and common building materials including concrete, porous tile, and stone. Special no-mess, self-mixing tube for easier application. Non-shrink, resistant to chemicals and solvents, this high-strength, fast-setting epoxy has a gel time in as little as 12-14 minutes; initial cure of 2 hours; and final cure time of 12-16 hours. Use both horizontal and vertical, up to 1/8" (3 mm) annular width and 10" (254 mm) depth. Because it is moisture tolerant, it is ideal for stopping air and water leaks. Gray in color.
Akona® Foundation Coating Cement
Akona® Foundation Coating Cement (BOM #102621) is a specially-formulated, cement-based product for coating and protecting polystyrene insulation board or insulated concrete forms (ICF) from weathering, ultraviolet rays, and general wear/impact. Akona Foundation Coating Cement is polymer-modified and contains fibers which reduces shrinkage and improves the adhesion properties of the product. Akona Foundation Coating Cement is easy to apply by masonry brush or trowel and has the superior durability of a Portland cement-based product. It also provides a tough, durable gray textured or stucco-like finish. If desired, the product may be integrally colored with a liquid cement or mortar colorant, or it can be painted to match existing home design.
Akona® Heavy-Duty Waterproofing Base Coat
Akona® Heavy-Duty Waterproofing Base Coat (BOM #102624) is a Portland cement-based, waterproof coating for use over concrete, block, brick or stucco surfaces. Use for interior or exterior coating of foundation, basement or retaining walls below or above grade. When applied over non-uniform areas, this product provides a smooth or textured surface that can be left as a finished decorative coating. In addition, this product can serve as a base coat for paint or similar faux finishes.
Akona® Instant Anchoring Cement
Akona® Instant Anchoring Cement (BOM #102645) is a quick-setting, anchoring cement compound used for setting poles, railings, bolts and fixtures in concrete or masonry. Suitable for interior or exterior use, this product expands as it hardens to set securely and lock in place for strong support. Average set time = 20 minutes
Akona® Instant Patching Cement
Akona® Instant Patching Cement (BOM #102632) is a high-performance cement used for filling wide cracks and other concrete repair needs. It sets rock hard in just 90 minutes. Akona Instant Patching Cement self-bonds to all properly-prepared concrete surfaces and develops twice the strength of ordinary concrete.
Instant Post Cement
Akona® Instant Post Cement (BOM #102631) is used for quick setting of all metal, wood and plastic fence, mailbox, basketball and swing set posts. This product does not require pre-mixing prior to use. Simply pour dry mix into the hole with water as directed. Instant Post Cement does not require bracing and sets in approximately 10-20 minutes. Akona Instant Post Cement is not designed to be used for footings or structural supports.
Akona® Instant Water Stop
Akona® Instant Water Stop is a quick-setting, hydraulic cement compound used primarily as a water stop or hole filler on concrete or masonry materials. It is formulated to expand when set and locks into place to block flowing water within 3 to 5 minutes. Instant Water Stop bonds to wet walls and is ideal for patching cracks and leaks in swimming pools and is available in 10 lb. bags (BOM #102635) and 25 lb. bags (BOM #102636)
Akona® Liquid Air Entraining Admixture
Akona® Liquid Air Entraining Admixture (BOM #103941) is a ready-to-use, aqueous solution made of organic materials. Akona Liquid Air Entraining Admixture entrains a small and stable amount of air into the desired mix. These small, stable air voids enhance the mixture and improve workability. Its chemical composition and physical properties make it ideal for many construction applications. It is intended for use when increased workability and freeze-thaw durability of concrete or mortar is preferred. This admixture also improves resistance to freeze/thaw, scaling, segregation, and bleeding and improves strength, plasticity, water retention, and cohesiveness of mortar. Meets ASTM C260 Standard Specification for Air-Entraining Admixtures for Concrete.
Akona® Mortar Repair
Akona® Commercial Grade Mortar Repair (BOM #103174) is designed for tuck-pointing, repairing, and sealing mortar joints and cracks in masonry units such as stone, brick and block walls. The product is gray in color and designed to blend in with the texture of surrounding mortar. Our durable, pre-mixed Mortar Repair is a sanded, acrylic formulation that dries quickly, is paintable, and provides superior adhesion to masonry.
Akona® Non-Shrink Grout (6,700 PSI)
Akona® Non-Shrink Grout (BOM #104953) is a pre-blended, pourable, non-metallic, Portland-cement based material used for grouting steel columns, bearing plates, precast concrete and anchors. Our Non-Shrink Grout compensates for an uneven foundation, distributes the weight of the unit, and prevents shifting after settling and leveling the unit. Akona Non-Shrink Grout is composed of aggregates, Portland cement and other additives to create an interior or exterior grout with non-shrinking characteristics capable of handling high-load transfers. Meets ASTM C1107 and is MN, WI, and NE DOT approved.
Akona® Polymer-Modified Concrete Resurfacer
Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength product has superior bond and is trowelable to from 1/4 in. down to 1/8 in. (6 to 3 mm). It may be trowel or broom finished, and is available in a 25 lb. bag (BOM #102642).
Akona® Pourable Gray Concrete Crack Filler
Akona® Gray Pourable Concrete Crack Filler is a ready-mixed, easy-to-apply, pourable material for filling cracks up to ¼" deep x ¼" wide. Gray in color to blend with concrete surfaces and flexible to conform to movements of active cracks, Concrete Crack Filler is ideal for horizontal concrete surface such as driveways, sidewalks, patios and garage floors. Available in 1 gal. bottles (BOM #102639) and 1 qt. bottles (BOM #102638). For larger cracks and holes, use Akona Vinyl Cement Patch.
Akona® Pre-Mixed Concrete & Stucco Patch
Akona® Pre-Mixed Concrete & Stucco Patch (BOM #103962) is a water-based formula intended to patch minor cracks, holes, and surface defects in concrete or stucco. Product may also be used for residential repairs of masonry walls and re-applying small broken pieces of concrete or tuck pointing brick mortar joints. Pre-Mixed Concrete & Stucco Patch offers superior adhesion and may be used for vertical or horizontal patches.
Akona® Rapid Patch® Concrete Refinisher
Akona® Rapid Patch® Concrete Refinisher (BOM #103145) is a heavy-duty, fast-setting patching material for concrete tilt-up panels, pre-cast concrete, concrete block, concrete pipe, and other concrete or masonry surfaces. This product is suitable for interior or exterior use. Just add water to create a workable, easy-to-apply mixture with excellent bonding characteristics. This product may be trowel applied over existing concrete surfaces from a feather-edge to 2" thickness to finish the appearance of concrete surfaces. It can be shaved or sanded to required shape. Its fast-setting characteristics made it ideal for vertical, horizontal, and overhead applications and when down time is critical.
Akona® Rapid Patch® Concrete Surface Repair
Akona® Rapid Patch® Concrete Surface Repair (BOM# 102896) is a high-strength, fast-setting, low-shrinkage patching material for commercial and industrial horizontal concrete surfaces. Concrete Surface Repair can also be used for concrete pavements, highway applications, concrete levelling and underlayments. Meets ASTM C928-R2. MN DOT approved under "Rapid Hardening Materials for Repairs".
Akona® Refractory Mortar
Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQ's, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.
Akona® Self-Leveling Floor Underlayment Cement
Akona® Self-Leveling Floor Underlayment Cement (BOM #104623) is a free-flowing mortar for use where a level surface is necessary prior to installing floor coverings. This ground-breaking formula has a dry, integral primer mixed so you no longer need to spend the additional money, time, and labor on adding an additional primer liquid. Our Self-Leveling Floor Underlayment Cement requires a minimum amount of labor to produce a smooth, level surface that is ready for installing floor coverings such as ceramic tile, marble, wood and carpet within 24 hours and resilient flooring after 72 hours. It is also ideal for encapsulate radiant heating installations. This product is designed for interior applications from ⅛" up to 1" thick.
Akona® Vinyl Cement Patch
Akona® Vinyl Cement Patch is ideally suited for repairs to damaged concrete steps, sidewalks, driveways, patios, curbs, walls and floors. This product contains unique polymers that give it twice the strength and three times the adhesion of conventional concrete. Just add water and mix for an easy-to-use product which can be troweled to a feather edge on interior and exterior concrete applications. For resurfacing large areas, use Akona Polymer-Modified Concrete Resurfacer.
Akona® White Glass Block Mortar
Akona® White Glass Block Mortar (BOM # 102627) is a specially-formulated blend of select white silica sands, white cement and workability agents which result in an easy-to-handle, high strength mortar. It is designed for installing glass block windows, shower and bath walls or masonry units where a white mortar is desired. This product is suitable for both interior and exterior applications.
Akonaflex® Pro Self-Leveling Expansion Joint Filler
Akonaflex® Pro Self-Leveling Expansion Joint Filler is a superior-grade, one-component, urethane sealant and filler to be used in concrete joints as well as a wide variety of substrates. Its self-leveling characteristics provide a smooth finish which makes it ideal for filling cracks or gaps on horizontal surfaces such as concrete driveways, sidewalks, above ground foundations, patios, concrete steps, garage floors, and other concrete surfaces. Akonaflex Pro fills expansion joints up to 1½" W x 1"D. Can be exposed to water after only 2 hours under normal conditions without washing out. It will reach full cure after 24 hours. Does not crack or shrink and thus acts as an excellent waterproof seal. Available in 2 convenient sizes: 10 oz. tubes (BOM #104560); and 29 oz. tubes (BOM #120440).
Akonaflex® Self-Leveling Concrete Repair
Akonaflex® Self-Leveling Concrete Repair is a one-component, construction-grade, polyurethane, moisture-cure sealant designed to meet the flexibility requirements of dynamically moving joints. Self-leveling to result in a smooth, gray finish which is foot-traffic ready after 3 days and will reach full cure in 1 week. Fills and seals horizontal joints up to 1"W x ½"D on concrete slabs, driveways, sidewalks, decks, pitch pans, pavers, garage floors, industrial floors and other concrete surfaces. Its premium-grade components give you a strong, durable, flexible, waterproof seal and leaves a finish that can be painted once cured with a latex paint. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant. Available in 2 convenient sizes: 10 oz. tubes (BOM #104562); and 29 oz. tubes (BOM #120456).
Akonakote® Pourable Concrete Patch
Akonakote™ Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.
Akonaseal® Polyurethane Masonry/Joint Sealant
Akonaseal™ Polyurethane Masonry/Joint Sealant (BOM #104561) has an updated package and name (previously called Polyurethane Construction Textured Sealant). A premium-grade, multi-purpose, moisture-cure sealant, designed to meet the flexibility requirements of dynamically moving cracks and joints, this texturized, gray mortar-colored sealant is ideally suited for vertical concrete, stucco or masonry applications with a maximum joint of 1"W x ½"D and can be painted with a latex paint when cured. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant.