Conproco® Color Coat
Colorfast coating, durable finish for concrete and masonry. Economical paint for concrete, masonry, and stucco.
Where to use: Enhance appearance and protect vertical and overhead concrete block, stucco, brick, and synthetic stucco.
How to apply: Apply with roller, spray, or brush, resulting in a 100% acrylic waterproof coating.
Conproco® Conpro™ Set
Conpro™ Set is a versatile, fast-setting, polymer-modified mortar for restoring concrete structures with decorative elements. It is shaveable for vertical and overhead repairs.
Where to use: Structural and protective repairs to vertical, overhead, and horizontal concrete.
How to apply: Trowel applied.
Conproco® Conpro™ Start
Conpro™ Start treats crumbling mortar joints and strengthens punky concrete surfaces. It is a penetrating consolidant utilizing mineral silicate technology to densify deteriorating cementitious surfaces.
Where to use: Restore surface integrity and strengthen the substrate before application of coatings or repair materials.
How to apply: Spray, roller, or brush applied, water-based consolidant, used to stabilize and strengthen concrete, masonry, and stone.
Conproco® Conpro™ Stucco
Provides a durable, decorative cementitious finish for exterior wall systems.
Where to use: For a natural-appearing, decorative texture coating on concrete, masonry, and curtain wall construction.
How to apply: Trowel or spray applied traditional Portland cement stucco. Refer to Conproco Exterior Wall Systems for additional information.
Conproco® ECB
ECB is a brush or spray applied, water-based, single-component anti-corrosion coating and long open time bonding primer that prevents rusting of rebar. Mechanically remove rust from rebar and apply.
Where to use: Protect reinforcing steel and metal embedded in concrete against corrosion.
How to apply: Spray or brush applied.
Conproco® Elastideck
Elastideck is a two-component product that, when applied, forms a flexible cement membrane. Elastideck is available in 14 standard colors. To freshen the surface after years of service, simply apply Super Color Stain.
Where to use: Decorative coating for balconies, walkways, driveways, planters, and parapets.
How to apply: Roller or squeegee applied.
Conproco® Foundation Coat
Permanently waterproof below-grade concrete masonry units with fiber-reinforced surface bonding cement.
Where to use: Permanent positive side waterproofing of below-grade concrete block walls.
How to apply: Trowel or spray applied, fiber reinforced, Portland cement-based, structural coating.
Conproco® Gun Shot LPS
Gunshot LPS is spray applied with low-pressure spray equipment to vertical and overhead concrete substrates when repairing vertical and overhead concrete structures.
Where to use: High production vertical and overhead concrete repairs.
How to apply: Spray or trowel applied.
Conproco® Injection Grout
Restore concrete structures by repairing hairline to 3/4″ cracks. 11 standard colors produce repairs that are less visible.
Where to use: Repair and reconstruct brownstone, sandstone, limestone, cast stone, concrete, marble, granite, terracotta, and brick.
How to apply: Inject using injection syringes, modified bulk guns, or low-pressure grout pumps.
Conproco® ISR AG
ISR AG is a durable, crack-resistant repair material utilizing ISR (Internal Stress Relief) technology with ECB-Tech corrosion protection, used in repairs over 2″ deep, such as parking decks, balconies, and plaza decks. It can be troweled into place or as a form and pour/pump material.
Where to use: Parking and plaza decks, balconies, and marine structures.
How to apply: Pour, pump, or hand patch.
Conproco® ISR CM
ISR CM (Color Matched) is for aesthetic concrete repairs. It is designed for restoring concrete structures while preserving their original appearance.
Where to use: Protective repairs to vertical and overhead surfaces that match the color of the parent concrete.
How to apply: Trowel applied.
Conproco® ISR VO
Durable, crack-resistant repair mortar utilizing ISR (Internal Stress Relief) technology with ECB-Tech corrosion protection. Restoring concrete structures requires repair mortars that are durable, crack-free, and easy to apply.
Where to use: Protective repairs to vertical and overhead concrete.
How to apply: Trowel applied.
Conproco® K-88
Improve the curing of cement, mortar, and cementitious materials. A bonding agent promotes adhesion.
Where to use: Mix with Structural Skin, Conpro Stucco, Foundation Coat, Plastermix, and mortar.
How to apply: Refer to the K-88 Admix Technical Data to find specific recommended addition rates.
Conproco® Lastic
Crack-bridging, breathable, waterproof coating for concrete and masonry. Durable, colorfast coating for concrete, masonry, and stucco.
Where to use: Protect vertical concrete, block, brick, stucco, and EIFS from water and contaminant entry. Will bridge minor cracking.
How to apply: Roller, spray, or brush applied, waterproof, elastomeric, crack bridging, anti-carbonation membrane.
Conproco® M3P
Mineral silicate-based, highly permeable paint/stain, with a natural finish for concrete, masonry, and terracotta. Durable protection for historic structures.
Where to use: Long-term protection and enhanced aesthetics of concrete, masonry, and stone. Opaque and semi-transparent finishes are available.
How to apply: Brush or roller applied.
Conproco® M3P-X
Protect historic structures with a transparent finish on concrete, masonry, and terracotta when combined with M3P.
Where to use: Clear penetrating mineral silicate diluent used for creating semi-transparent finishes with M3P.
How to apply: Brush or roller applied, combined with M3P.
Conproco® M3P Overcoat
Highly breathable mineral silicate/acrylic hybrid coating for recoating elastomeric and silicone-based paints. Natural appearance, durable coating to preserve new concrete structures.
Where to use: Over properly prepared silicone and elastomeric coatings, masonry paint, and new concrete.
How to apply: Brush or roller applied.
Conproco® Matrix
Repair natural stone, terracotta, and brick with a mortar formulated specifically for traditional masonry. Matrix is available in over 70 standard colors and custom color matching.
Where to use: Repair and reconstruct natural and cast stone, terracotta, and brick.
How to apply: Trowel applied.
Conproco® Matrix TR
Matrix TR is formulated to provide long-term protection of natural stone and concrete when full-depth repairs are unnecessary or not practical.
Where to use: Thin, protective repairs to brownstone, sandstone, limestone, cast stone, terracotta, and concrete.
How to apply: Brush or trowel applied.
Conproco® Matrix VE
Repair natural stone, terracotta and brick with a more fluid version of Matrix without changing physical properties. Available in over 70 standard colors and custom color matching.
Where to use: Repair and reconstruct natural and cast stone, terracotta, and brick.
How to apply: Pour applied.
Conproco® One Shot 2C
One Shot 2C can be applied from 1/16″ to 1/2″ to resurface balconies, industrial floors, loading docks, and ramps.
Where to use: Resurface balconies, parking decks, industrial floors, loading docks, and ramps.
How to apply: Trowel or pump.
Conproco® Plastermix
Durable cementitious parge coat to fill bug holes and voids in concrete. Creates a smooth and textured finish for coatings and paints.
Where to use: Fill voids and provide a uniform finish to cast concrete.
How to apply: Trowel, sponge float, or spray applied.
Conproco® Primer
Primer is a long open time bonding agent used to improve adhesion between existing cementitious surfaces and new repair mortars/toppings.
Where to use: Bonding primer for overlays and repair materials to hardened concrete.
How to apply: Spray, roller, or brush applied.
Conproco® Repoint
Repoint masonry with color-matched Type N and Type O mortar. Available in 23 standard colors and custom color matching.
Where to use: Available in both Type O or Type N formulations and can be used anywhere these types are specified.
How to apply: Use approved ASTM E2260 pointing technologies.
Conproco® Repoint VE
Repoint masonry with this color-matched Type N and Type O mortar, which is formulated to be more fluid for application using a grout bag. Available in 23 standard colors and custom color matching.
Where to use: Use with Conproco Repoint.
How to apply: Enables bagging.
Conproco® Shield MX
A clear, penetrating water repellent for concrete and masonry. Unaffected by microbiological activity.
Where to use: Vertical and horizontal concrete, concrete block, concrete pavers, natural stone, stucco, and brick.
How to apply: Spray, roller, or brush applied, penetrating aqueous silane/siloxane water repellent.
Conproco® Structural Skin
Base coating for exterior wall systems over CMU, concrete, brick exterior sheathing, and plywood.
Where to use: Base coating for exterior wall systems over block, concrete, brick, exterior sheathing, and plywood.
How to apply: Trowel or spray applied.
Conproco® Super Color Stain
Colorfast, durable stain for concrete block, stucco, vertical, and horizontal concrete surfaces. Enhances natural appearance and adds protection from elements.
Where to use: Enhance appearance and protect concrete, CMU, stucco, brick, and as a washable finish for Elastideck.
How to apply: Apply with roller, spray, or brush, using water-based opaque acrylic stain.
Conproco® Super Seal
Stop water seeping through concrete and masonry walls by applying crystalline waterproofing slurry to the interior wall surface.
Where to use: Waterproof concrete tunnels, storage tanks, foundations, wastewater storage, and other demanding applications.
How to apply: Spray or brush applied, capillary/crystalline slurry, for positive and negative side waterproofing of concrete structures.
Conproco® TerraColor
Repairing terracotta includes matching the glaze with a highly permeable finish. Terracotta is found on many historic structures.
Where to use: To create colored glaze finishes for brick and terracotta repair.
How to apply: Brush applied.
Conproco® Terracotta Finish
Repairing terracotta includes matching the sheen. Terracotta is found on many historic structures.
Where to use: Apply the glaze to terracotta or the fire skin to brick. Apply over Terra-Color to match the surrounding undamaged terracotta.
How to apply: Brush or roller applied.