80 lb.

Tenon^® Shotcrete D-LR Microfiber

Tenon® D-LR1 Microfiber is a dry-process shotcrete containing a pre-blended Portland cement, air-entraining admixture, set time accelerator, synthetic fibers, selectively blended aggregates, and propriety performance enhancing components. Available in 80 lb. bags (BOM #112865) and 3000 lb. bags (BOM #110258). Tenon® D-LR2 Microfiber is specifically designed to provide low resistivity values complimenting preplaced cathodic protection systems. Available in 80 lb. bags (BOM #112866) and 3000 lb. bags (BOM #112864).

Tenon^® Shotcrete D-SF Microfiber

Tenon® D-SF Microfiber is a dry process shotcrete containing a pre-blended Portland cement, silica fume, air-entraining admixture, set time accelerator, synthetic fibers, selectively blended aggregates, and propriety performance enhancing components. Tenon® D-SF Microfiber is specifically designed to provide excellent application characteristics with balanced performance properties. This product is approved by MNDOT for "Shotcrete - Concrete Surface Repairs". Available in 80 lb. bags (BOM #112870 & BOM #112868) and 3000 lb. bags (BOM #112869 & BOM #112867).

Quikrete^® 5000 Concrete Mix

Quikrete® 5000 Concrete Mix (BOM #104624) is a commercial-grade blend of stone or gravel, sand and cement specially designed for higher early strength and ideal for cold weather application. Just add water, mix and use for concrete projects 2" thick or more such as driveway aprons, patios, deck supports, and sign footings. Achieves 5,000 psi after 28 days.

SPEC MIX^® Corefill Masonry Grout – 4,000 PSI

SPEC MIX^® Corefill Grout - 4,000 psi (BOM #105424) is a dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction.

Also available in 3,000 lb. (BOM #106004) bulk bags to work with our silo system. Please contact your salesperson for more information.

TechMix^® Black Blast

TechMix® Black Blast (BOM #106908) are abrasive blasting crystals that can be used for rust/paint removal and cleaning stone and brick. Additionally, the crystals hard, sharp, evenly-sized crystals make them ideal to frost/etch glass. Black Blast crystals work with all blasting equipment, are safe to use, and have a 1.5-2.0 mil anchor profile.

SPEC MIX^® Corefill Masonry Grout – 5,000 PSI

SPEC MIX® Corefill Grout - 5,000 psi (BOM #106903) is a dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction. Also available in 3,000 lb. (BOM #101472) bulk bags to work with our silo system. Please contact your salesperson for more information.

TechMix^® Concrete Mix

TechMix® Concrete Mix is a high strength pre-blended Portland cement mixture for pouring concrete 2 inches thick or greater. Used for general building and repairing steps, slabs, walks, and floors. Available in 60# bags (BOM #104879), 80# bags (BOM #104883) and 3,000# bags (BOM #112228).

SPEC MIX^® Mortar – Colored

SPEC MIX® Portland Lime & Sand with Color is a dry, preblended mortar mix containing Portland cement, hydrated lime, dried masonry sand and color pigment formulated for superior bond, workability and board life. This product meets ASTM C270 and ASTM C1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar with color in Type N, Type S, and Type M. PCL Sand with color is also available with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information. **For best results, TCC Materials recommends the use of 2% color o greater in our premixed cementitious mixes due to the potential of color inconsistencies which can occur when using mixes with 1%. The small amount of pigment in the mixes with less than 2% color can be greatly affected by raw cement color, field conditions, and type of masonry unit being laid.**

Quikrete^® Crack-Resistant Concrete Mix

Quikrete® Crack-Resistant Concrete Mix (BOM #109358) is a construction grade blend of Portland cement, sand, gravel & special reinforcing fibers to reduce shrinkage cracks and improve impact resistance. Just add water and mix to create for walkways, patios, steps, garage or shed floors.

SPEC MIX^® Mortar w/ Integral Water Repellent

SPEC MIX® IWR (Integral Water Repellent) Mortar is a dry, preblended mortar mix containing Portland cement and hydrated lime, mortar cement or masonry cement with dried masonry sand and water repellant admixture formulated for water repellency, superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. SPEC MIX® IWR (Integral Water Repellent) Mortar is available in Type N, S, and M and can also be ordered with integral color. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

TechMix^® High-Strength 5000 Concrete Mix

TechMix® High-Strength 5000 Concrete Mix is a commercial grade blend of aggregate, sand, and Portland cement specifically designed for higher early strength. Ideal for cold-weather applications, it achieves 5,000 psi after 28 days. Used for any application of 2" thick or greater. Available in 60# bags (BOM #101122) and 80# bags (BOM #104882).

SPEC MIX^® Polymer-Modified Setting Bed Mortar

SPEC MIX® Polymer Modified Setting Bed Mortar is specially engineered as a thick, solid mortar bed for constructing horizontal surfaces with natural and manufactured paving units. This product contains a unique blend of polymers and other performance-enhancing admixtures allowing it to meet ANSI and ASTM requirements. PMSBD can be used as a thick, fortified bedding mortar for residential and commercial paving unit applications as well as joint grouting material between horizontal pavers. It can also be used as a polymer-modified, dry-pack setting bed material in interior and exterior installations allowing light to heavy traffic. Available in 80 lb. bags (BOM #100473) and 3,000 lb. bulk bags (BOM #104720) to work with our silo system. Please contact your salesperson for more information.

SPEC MIX^® Polymer-Modified Adhered Veneer Mortar (PMAVM)

SPEC MIX® Polymer Modified Adhered Veneer Mortar (PMAVM) (BOM #103592) is a blend of dry cementitious materials, masonry sand and performance admixtures specifically designed to provide superior bond for adhered manufactured and natural thin stone as well as brick veneer units. PMAVM is designed to provide excellent workability, cohesion, high bond strength, sag resistance, water resistance, efflorescence minimization, and durability. This product meets the requirements of ASTM C 270 and ASTM C 1714 for Type S mortars including ANSI A118.4 and ACI 530 shear bond standards. TCC Materials also offers PMAVM with integral color. Also available in 3,000 lb. (BOM #103593) bulk bags to work with our silo system. Please contact your salesperson for more information.

Quikrete^® Mason Mix

Quikrete® Mason Mix (BOM #106514) is a high strength Commercial Grade dry pre-blended mixture of sand and cements specially selected for masonry applications. Meets N, S, M requirements as specified in ASTM C270. Just add water. Also available in a 60 lb. bag (BOM #105673) at some locations.

SPEC MIX^® Set Accelerated Mortar

SPEC MIX® Set Accelerated Mortar is a dry preblended mortar mix containing Portland cement, hydrated lime or masonry Cement or mortar cement, dried masonry sand, and set accelerating admixtures formulated for faster set times in cold weather while maintaining superior bond, water retention and board life. This product meets ASTM C 270, ASTM C 1384 and ASTM C 1714 requirements. TCC Materials offers Set Accelerated Mortar in Type S (BOM #103757). Other types are available upon request. Also available in 3,000 lb. (BOM #112328) bulk bags to work with our silo system. Please contact your salesperson for more information.

SPEC MIX^® Setting Bed Mortar

SPEC MIX® Setting Bed Mortar is specially engineered as a thick, solid mortar bed for constructing horizontal surfaces with natural and manufactured paving units. This dry, preblended mortar contains cementitious materials and dried aggregates that are mixed with a low-water addition rate for a zero-slump dry pack base material. Now contractors have high-quality, consistent bedding materials that increase daily productivity every time. Setting Bed Mortar can be used as a paving unit base for residential and commercial paving unit applications. It can be used for interior and exterior installations allowing light and medium traffic. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

SPEC MIX^® Shotcrete

SPEC MIX® Shotcrete products are designed for a wide range of applications. Shotcrete products are available in standard formulizations and custom mix designs to fit specific project requirements -- whether you are casting new structures or restoring existing projects, above ground or below. Please contact your sales representative for more information. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

TechMix^® Mortar Mix – Type N

TechMix® Mortar Mix Type N (BOM #104881) is a blend of Portland cement, lime, and sand for laying brick, block, and stone for all types of construction.

TechMix^® Mortar Mix – Type S

TechMix® Mortar Mix Type S (BOM #104885) is a blend of Portland cement, lime, and sand for laying brick, block, and stone on either load-bearing or non-load-bearing walls. Suitable for construction below grade.

TechMix^® PCL Mortar Pro – Type N

TechMix® PCL Mortar Pro - Type N is a consistent, specifically-formulated blend of Portland cement, hydrated lime, and dried sand with superior bond, water retention, and board life. Used for multi-purpose interior and exterior masonry construction including laying brick, block, and stone. Type N is suitable for load-bearing, above-grade construction. Meets requirements of ASTM C270.  Available in 80# bags (BOM #111207) and 3000# bulk bags (BOM #111118). PCL Mortar Pro is also available with preblended color and/or integral water repellant. For more information, contact your sales representative.

SPEC MIX^® Stucco Colored Finish Coat

SPEC MIX® Colored Finish Coat Stucco is a custom blend cementitious material, additives, aggregates and pigment meeting ASTM C 926 requirements. It is designed as the finish coat for traditional two- or three-coat stucco systems. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

TechMix^® PCL Mortar Pro – Type S

TechMix® PCL Mortar Pro - Type S is a consistent, specifically formulated blend of Portland cement, hydrated lime, and dried sand with superior bond, water retention, and board life. Used for multi-purpose interior and exterior masonry construction including laying brick, block, and stone. Type S is suitable for load-bearing construction above or below grade. Meets requirements of ASTM C270.  Available in 80# bags (BOM #111217) and 3000# bulk bags (BOM #111119). PCL Mortar Pro is also available with preblended color and/or integral water repellant. For more information, contact your sales representative.

SPEC MIX^® Stucco Fiber Base Coat – ICC

SPEC MIX® Fiber Base Coat Stucco (BOM #103557) is an ICC code approved, dry, preblended cement stucco basecoat that is engineered with proprietary admixtures and fibers that reduce shrinkage and cracking. The SPEC MIX® Fiber Base Coat is computer batched for consistency and performance unmatched by traditional field-mixed stucco. The SPEC MIX® Fiber Base Coat can be installed as a "One Coat Stucco" basecoat (code approved) or as the scratch and brown coat in a traditional stucco application. Product meets the requirements for ASTM C 926. Also available in 3,000 lb. (BOM #103674) bulk bags to work with our silo system. Please contact your salesperson for more information.

Quikrete^® Stucco Base – Pump Grade

Quikrete® Base Coat Stucco - Pump Grade is a Portland cement based stucco, designed to be used as the scratch and/or brown coat in a 3-coat stucco application, or the first coat in a 2-coat application. This product contains special additives which prevent premature loss of mixing water and provide increased workability. This product is intended for use over galvanized expanded metal lath or solid bases such as masonry, cast-in-place or precast concrete. Available in 80# bags (BOM #104298) and 3000# bulk bags (BOM #104346).

Quikrete^® Stucco Base Coat – Scratch & Brown

Quikrete® Scratch and Brown Base Coat Stucco (BOM #103191) is a Portland cement-based stucco designed to be used as the scratch and/or brown coat in a 3-coat stucco application, or the first coat in a 2-coat application.  

SPEC MIX^® Underground Utility Mortar

SPEC MIX® Underground Utility Mortar (BOM #106516) is a dry, preblended, air-entrained mortar mix containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. This product meets ASTM C 270 and ASTM C 1714 requirements. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

TechMix^® Finish Coat Stucco

TechMix® Finish Coat Stucco (BOM #112146) is a uniformly preblended white Portland cement-based mix designed as the finish coat for traditional two and three-coat stucco applications. Produces a decorative exterior or interior veneer finish over concrete or masonry walls. 

Quikrete^® Stucco Finish Coat

Quikrete® Stucco Finish Coat White (BOM #100678) is a Portland cement based stucco finishing plaster designed for use as the color and texture coat over Portland cement base coat or fiberglass reinforced stucco. Requires only the addition of water.

Sakrete^® High Strength Concrete Mix

Sakrete® High Strength Concrete Mix (BOM #100171 = 60 lb. bag / #120021 = 50 lb. pail / #101090 = 80 lb. bag) is designed for anchoring posts and poles, and pouring footings and slabs. High Strength Concrete Mix is premium quality for consistent strength and durability and meets ASTM C 387 strength requirements for structural applications. Uses include building walks, drives, slabs and steps as well as anchoring posts and poles. High Strength Concrete Mix is for applications requiring at least 2 inches in thickness. Just add water, mix, and use.

SPEC MIX^® Underground Utility Mortar (WI DOT)

SPEC MIX® Underground Utility Mortars (WI DOT) are dry, preblended mortar mixes containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. TCC Materials® Underground Utility Mortars are designed to be compatible with the characteristics of the specified precast concrete structure or brick used in manhole and catch-basin construction. They are acceptable for the jointing of all types of underground precast concrete utility construction and laying concrete brick in manholes and catch basins. They may be used above or below grade when manufactured to the appropriate specification. BOM#103725 meets WI DOT specification 518.2.3 mortar proportion specification for WI DOT Stone & Pointing Mortars and also meets ASTM C387. BOM #105223 meets WI DOT specification 519.2.3 mortar proportion specification for WI DOT Catch Basin/Manhole Mortar as well as ASTM C387. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

Sakrete^® Mortar-Stucco Mix Type S

Sakrete® Mortar-Stucco Mix Type S is a contractor-grade mortar mix for laying brick, block, and stone in load-bearing walls and construction above or below grade level. It can also be used as a scratch and brown coat in stucco application. Just add water, mix, and use. Available in 80 lb. bag (BOM #100531) and 50 lb. pail (BOM #120023)

Sakrete^® Stone Veneer Mortar

Sakrete® Stone Veneer Mortar Mix (BOM #105167) is a polymer-modified contractor grade mortar specifically designed to adhere manufactured or artificial stones in vertical applications. Just add water and mix to use.