40 lb.
-
Signature Pelletized Gypsum
Signature Pelletized Gypsum (BOM #103589) is an excellent source of calcium and sulfur used to improve soil structure. It allows for better water and oxygen penetration, addresses salt damage from winter de-icing, pets, and effluent water. Additionally, it stimulates microorganism growth and helps alleviate blossom end rot.
-
Tenon® Critical Pavement Repair (CPR)
Tenon® Critical Pavement Repair (CPR) is a preblended, single-component, repair mortar designed to be a quick, durable repair for essential heavy-duty surfaces. This includes airport runways, concrete highways, parking structures, freezer rooms, loading docks, industrial floors, and much more. It is fast-setting, high-strength, polymer-modified, and fiber reinforced as well as freeze-thaw durable. CPR contains corrosion inhibitors to mitigate corrosion issues. It can be trowel applied on horizontal or vertical surfaces or pumped into place for formed vertical and overhead repairs. Meets ASTM C928 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs. Available in a 50 lb. bag (BOM #113091).
-
TechPro® Congelz®
TechPro® CONGELZ® Waste Water Solidification is an environmentally-friendly solution to disposing of unwanted rinse water or mortar slurry from any mortar or concrete project. When used as directed, this patented technology transforms rinse water from a liquid to a gel. Passes ASTM 9095B paint filler test, this gel has been determined to be safe and legal for landfill disposal. Using CONGELZ solves the common issues caused by cementitious waste disposal - no more clogged drains or dumping of product on jobsites. Simply add the product to your rinse water, allow to gel, and toss the works in the trash. Available in a 5 lb. box (BOM #121214), 15 lb. box (BOM #121213), and 40 lb. box (BOM #121210).
-
Quikrete® Concrete Mix
Quikrete® Concrete Mix (BOM #100389) is the original 4,000 psi average compressive strength blend of Portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. Designed for pouring concrete 2" thick or more or building/repairing concrete structures. Available in 80 lb. bags (BOM #100389), 60 lb. bags (BOM #101356), and 40 lb. bags (BOM #104606). Approximate Yield: 80 lbs. = 0.60 cu. ft. 60 lbs. = 0.45 cu. ft.
-
Quikrete® Re-Cap Concrete Resurfacer
Quikrete® Re-Cap™ Concrete Resurfacer (BOM #112421) is a special blend of portland cement, sand, polymer modifiers and other additives. Designed to provide a shrinkage compensated repair material for making thin repairs to sound concrete in need of surface renewal. Can be squeegee, trowel or brush applied.
-
Signature Pelletized Lime
Signature Pelletized Lime (BOM #103588) helps plant and crop growth by increasing the pH in acidic soil (pH below 7). It improves microbial action to help breakdown pesticides and organic matter as well as alleviates problems like blossom end rot and aluminum toxicity. It is great for increasing the effective use of other major nutrients and helping control weed pressure in lawns. This is done by boosting the plant's ability to absorb nitrogen and synthesize proteins.
-
TechPro® Heavy-Duty Stone Veneer Mortar
TechPro® Heavy-Duty Stone Veneer Mortar (BOM #120444) is a high-yield, lightweight, high-performance, polymer-modified, fiber-reinforced, Portland-cement based mortar for adhered installation of masonry veneer stone and natural stone. 25% lighter than traditional mortars with excellent non-sag and non-slump handling characteristics. Special admixtures help create both a mechanical and chemical bond to the substrate, significantly outperforming standard mortars. TechPro Heavy-Duty Stone Veneer Mortar is "Step 2" of the TechPro stone installation system used to create decorative exterior and non-load bearing interior veneer walls.
-
Akona® Vinyl Cement Patch
Akona® Vinyl Cement Patch is ideally suited for repairs to damaged concrete steps, sidewalks, driveways, patios, curbs, walls and floors. This product contains unique polymers that give it twice the strength and three times the adhesion of conventional concrete. Just add water and mix for an easy-to-use product which can be troweled to a feather edge on interior and exterior concrete applications. For resurfacing large areas, use Akona Polymer-Modified Concrete Resurfacer. Akona® Vinyl Cement Patch is available in 3 convenient sizes: 10 lb bag (BOM #102633), 25 lb bag (BOM #102634), and 40 lb bag (BOM #104452).
-
Quikrete® Vinyl Concrete Patcher
Quikrete® Vinyl Concrete Patcher is a multi-purpose concrete repair material with strong adhesive properties which trowels to a feather edge of 1/16" (1.6 mm) and is made of a special blend of exterior-grade vinyl resin, fine sand, and Portland cement. Just add water. Available in 40 lb. bags (BOM #100472), 20 lb. pails (BOM #100131), and 10 lb. pails (BOM #109334).
-
Tenon® Masonry Veneer Mortar HB
Tenon® Masonry Veneer Mortar HB (High Bond) (BOM #120462) is a high-performance, non-sag, fiber-reinforced, polymer-modified bonding mortar for installing real or manufactured masonry veneer units. Our Pro Veneer Technology (PVT) is a blend of cementitious materials, oven-dried sand, and special performance admixtures to create a professional strength mortar. This high-yield mortar allows for the same coverage as a traditional 50 lb. bag in a lighter-weight 40 lb. size. Meets or exceeds the requirements of ANSI A118.4, A118.11, A118.15 and ASTM C270.