Masonry Sealers

Conproco^® Color Coat

Colorfast coating, durable finish for concrete and masonry. Economical paint for concrete, masonry, and stucco.

Where to use: Enhance appearance and protect vertical and overhead concrete block, stucco, brick, and synthetic stucco.

How to apply: Apply with roller, spray, or brush, resulting in a 100% acrylic waterproof coating.

Conproco^® Conpro^™ Stucco

Provides a durable, decorative cementitious finish for exterior wall systems.

Where to use: For a natural-appearing, decorative texture coating on concrete, masonry, and curtain wall construction.

How to apply: Trowel or spray applied traditional Portland cement stucco. Refer to Conproco Exterior Wall Systems for additional information.

Conproco^® Elastideck

Elastideck is a two-component product that, when applied, forms a flexible cement membrane. Elastideck is available in 14 standard colors. To freshen the surface after years of service, simply apply Super Color Stain.

Where to use: Decorative coating for balconies, walkways, driveways, planters, and parapets.

How to apply: Roller or squeegee applied.

Conproco^® Gun Shot LPS

Gunshot LPS is spray applied with low-pressure spray equipment to vertical and overhead concrete substrates when repairing vertical and overhead concrete structures.

Where to use: High production vertical and overhead concrete repairs.

How to apply: Spray or trowel applied.

Conproco^® M3P

Mineral silicate-based, highly permeable paint/stain, with a natural finish for concrete, masonry, and terracotta. Durable protection for historic structures.

Where to use: Long-term protection and enhanced aesthetics of concrete, masonry, and stone. Opaque and semi-transparent finishes are available.

How to apply: Brush or roller applied.

Conproco^® M3P Overcoat

Highly breathable mineral silicate/acrylic hybrid coating for recoating elastomeric and silicone-based paints. Natural appearance, durable coating to preserve new concrete structures.

Where to use: Over properly prepared silicone and elastomeric coatings, masonry paint, and new concrete.

How to apply: Brush or roller applied.

Conproco^® M3P-X

Protect historic structures with a transparent finish on concrete, masonry, and terracotta when combined with M3P.

Where to use: Clear penetrating mineral silicate diluent used for creating semi-transparent finishes with M3P.

How to apply: Brush or roller applied, combined with M3P.

Conproco^® Matrix TR

Matrix TR is formulated to provide long-term protection of natural stone and concrete when full-depth repairs are unnecessary or not practical.

Where to use: Thin, protective repairs to brownstone, sandstone, limestone, cast stone, terracotta, and concrete.

How to apply: Brush or trowel applied.

Conproco^® Structural Skin

Base coating for exterior wall systems over CMU, concrete, brick exterior sheathing, and plywood.

Where to use: Base coating for exterior wall systems over block, concrete, brick, exterior sheathing, and plywood.

How to apply: Trowel or spray applied.

Conproco^® Super Color Stain

Colorfast, durable stain for concrete block, stucco, vertical, and horizontal concrete surfaces. Enhances natural appearance and adds protection from elements.

Where to use: Enhance appearance and protect concrete, CMU, stucco, brick, and as a washable finish for Elastideck.

How to apply: Apply with roller, spray, or brush, using water-based opaque acrylic stain.

Conproco^® Terracotta Finish

Repairing terracotta includes matching the sheen. Terracotta is found on many historic structures.

Where to use: Apply the glaze to terracotta or the fire skin to brick. Apply over Terra-Color to match the surrounding undamaged terracotta.

How to apply: Brush or roller applied.

Tenon^® Burnished Block Sealer WB Matte

Tenon®Burnished Block Sealer WB Matte is used as a final sealer on masonry block walls including burnish block or groundface block, architectural block, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. It enhances the beauty, giving the surface a rich "wet-look" without the gloss. It forms a breathable membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Made with a durable polysiloxane that does not yellow when exposed to the sun's UV rays. Available in a 1 gal. bottle (BOM #130090), 5 gal. pail (BOM #130080) and 55 gal. drum (BOM #129695).

Tenon^® Burnished Block Sealer

Tenon® Burnished Block Sealer is used as a final sealer on masonry block walls including burnish block or ground face block, architectural block, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Burnished Block Sealer enhances the beauty, giving the surface a rich “wet-look” sheen. It forms a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Made with a blend of methacrylate polymers, this aromatic solvent-based coating does not yellow when exposed to the sun’s UV rays. Available in 1 gal. bottle (BOM #121100), 5 gal. pail (BOM #129530), and 55 gal. drum (BOM #121101).

Tenon^® Burnished Block Sealer WB

Tenon® Burnished Block Sealer WB is used for sealing finished masonry block walls including burnish block or groundface block, architectural block, brick, slate, paving stone, terrazzo, and quarry tile to protest from damage while enhancing the color with a wet-look sheen. It forms a breathable membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Made with a durable acrylic that does not yellow when exposed to the sun’s UV rays. Available in 1 gal. bottle (BOM#121110), 5 gal. pail (BOM#121107), and 55 gal. drum (BOM#121113).

Tenon^® Concrete & Masonry Sealer WB

Tenon® Concrete & Masonry Sealer WB is a water-based sealer that penetrates and reacts chemically within the capillaries of the concrete or masonry, bonding to the silica in the substrate to protect against moisture penetration, water-related staining, atmospheric chemicals, and deterioration. It is used to protect and seal clean, dry, coating-free, fully-cured concrete, brick masonry, concrete masonry units, stucco, stone terrazzo, architectural concrete, and some natural stones. For above-grade exterior applications that are not subject to hydrostatic pressure. Ready-to-use, this low VOC, silane/siloxane emulsion is especially suited for applications where VOC regulations for AIM coatings prevent the use of solvent-borne products. Available in 1 gallon bottles (BOM #120673) and 5 gallon pails (BOM #120674).

Sakrete^® Cure ‘N Seal (WB)

Sakrete® Cure 'N Seal (WB) (BOM #120045) is a clear, non-yellowing, waterborne, acrylic polymer modified resin compound used for curing, sealing, and hardening freshly placed concrete. Also used to seal, protect, and dustproof existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.