60 lb.
-
Quikrete® FastSet™ Concrete Mix
QUIKRETE® FastSet™ Concrete Mix (BOM #113204) is a fast-setting, high early strength concrete designed to build or repair concrete sidewalks, driveways, highways, bridge decks, concrete parking lots and concrete floors. Use at any thickness from 2 in to 24 in (50 mm to 610 mm). FastSet™ Concrete has less shrinkage than ordinary Portland cement concrete. The addition of corrosion inhibitor has no adverse effect on the other physical properties of the product.
-
TechMix® All-Purpose Sand
TechMix® All-Purpose Sand (BOM#110241) is a naturally occurring, mined, graded, washed and dried sand that meets ASTM C-33. All-Purpose sand has a wide variety of uses, including as a concrete or mortar aggregate, fill sand, traction grit, landscaping, etc. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 60 lb. bag 60 lb. 56 3360 lb. […]
-
TechMix® Concrete Mix
TechMix® Concrete Mix is a high strength pre-blended Portland cement mixture for pouring concrete 2 inches thick or greater. Used for general building and repairing steps, slabs, walks, and floors. Available in 60# bags (BOM #104879), 80# bags (BOM #104883) and 3,000# bags (BOM #112228).
-
Quikrete® Concrete Mix
Quikrete® Concrete Mix (BOM #100389) is the original 4,000 psi average compressive strength blend of Portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. Designed for pouring concrete 2" thick or more or building/repairing concrete structures. Available in 80 lb. bags (BOM #100389), 60 lb. bags (BOM #101356), and 40 lb. bags (BOM #104606). Approximate Yield: 80 lbs. = 0.60 cu. ft. 60 lbs. = 0.45 cu. ft.
-
TechMix® Crack-Resistant Concrete Mix
TechMix® Crack-Resistant Concrete Mix (BOM #110260) is a high-strength, pre-blended Portland cement mixture for pouring concrete 2" (5 cm) thick or greater. Crack-Resistant Concrete Mix is air-entrained to increase freeze-thaw durability and fiber-reinforced to reduce shrinkage cracks and improve impact resistance. Meets or exceeds requirements of ASTM C387.
-
TechMix® High-Strength 5000 Concrete Mix
TechMix® High-Strength 5000 Concrete Mix is a commercial grade blend of aggregate, sand, and Portland cement specifically designed for higher early strength. Ideal for cold-weather applications, it achieves 5,000 psi after 28 days. Used for any application of 2" thick or greater. Available in 60# bags (BOM #101122) and 80# bags (BOM #104882).
-
Quikrete® Fast Set™ Non-Shrink Grout
Quikrete® FastSet Non-Shrink Grout (BOM #109718) is designed for structural concrete repairs from ¼" to 24" deep and features a 30-minute set time, non-shrink characteristics and rapid strength gain. It can be mixed to a plastic, flowable or fluid consistency. Use for anchoring and grouting anchor bolts, bearing plates, pre-cast concrete keyways, or steel column bases. At a fluid consistency the compressive strength ASTM C109 reaches 2000 psi at 3 hours, 4000 psi at 24 hours, 5000 psi at 7 days, and 6500 psi at 28 days. At a flowable consistency the compressive strength ASTM C109 reaches 2500 psi at 3 hours, 4500 psi at 24 hours, 5500 psi at 7 days and 7500 at 28 days. At a plastic consistency the compressive strength reaches 3000 psi at 3 hours, 5000 psi at 24 hours, 6000 psi at 7 days and 8000 at 28 days. Exceeds ASTM C 928 R-3 and ASTM C 1107.
-
Quikrete® FastSet™ Repair Mortar
Quikrete® FastSet Repair Mortar (BOM #109719) is specifically formulated to make structural repairs to any concrete, masonry or stucco surface. This low-sag formula has a 20-30 minute working time which allows for sculpting of the material during placement and makes it ideal for vertical and overhead repairs. Just add water, mix, and use to repair concrete, masonry, or stucco surfaces. Exceeds ASTM C 928 R-2. Compressive strength ASTM C109 modified: 3 hours=2,000 psi, 24 hours = 4,000 psi, 7 days = 5,000 psi, and 28 days = 6,000 psi.
-
Quikrete® Mason Mix
Quikrete® Mason Mix (BOM #106514) is a high strength Commercial Grade dry pre-blended mixture of sand and cements specially selected for masonry applications. Meets N, S, M requirements as specified in ASTM C270. Just add water. Also available in a 60 lb. bag (BOM #105673) at some locations.
-
Quikrete® Mortar Mix – Type N
Quikrete® Mortar Mix (BOM #100533) is a blend of masonry cement and graded sand, designed to meet ASTM C 270 for Type N Mortar. Just add water and mix to construct or repair block, brick, or stone structures like walls, pillars, barbecues, planters, and for tuck-pointing mortar joints.
-
TechMix® Mortar Mix – Type N
TechMix® Mortar Mix Type N (BOM #104881) is a blend of Portland cement, lime, and sand for laying brick, block, and stone for all types of construction.
-
Quikrete® Sand Mix
Quikrete® Sand/Topping Mix (BOM #101231) consists of a uniformly-blended mixture of Portland cement, commercial-grade sands and other approved ingredients. Just add water and mix to repair or top damaged concrete surfaces less than 2" thick.
-
TechMix® Sand Topping Mix
TechMix® Sand Topping Mix is a uniformly pre-blended Portland cement and sand mixture for placing concrete overlays 2" thick or less. Used for patching and leveling steps, slabs, walks, and floors. Available in 60 lb. bags (BOM #104880).
-
Sakrete® High Strength Concrete Mix
Sakrete® High Strength Concrete Mix (BOM #100171 = 60 lb. bag / #120021 = 50 lb. pail / #101090 = 80 lb. bag) is designed for anchoring posts and poles, and pouring footings and slabs. High Strength Concrete Mix is premium quality for consistent strength and durability and meets ASTM C 387 strength requirements for structural applications. Uses include building walks, drives, slabs and steps as well as anchoring posts and poles. High Strength Concrete Mix is for applications requiring at least 2 inches in thickness. Just add water, mix, and use.
-
Sakrete® Mortar Mix Type N
Sakrete® Mortar Mix Type N (BOM #100770) is a regular-strength, general-purpose mortar mix for laying brick, block and stone in wall construction or for repairing damaged mortar joints. Just add water, mix, and use.
-
SAKRETE® Mortar Repair
Sakrete® Mortar Repair Tube (BOM#121119) is a weather-resistant, latex-based polymer used for repairing deteriorated mortar joints or cracks in walls.
-
Sakrete® Sand Mix
Sakrete® Sand Mix (BOM #100397) is a quality mixture of sand and cement designed to be used as a topping mix to rejuvenate damaged concrete surfaces or as a bedding mix and joint grout for flagstone, slate, and brick walkways. Sand Mix can be applied in layers ranging from ½ to 2 inches thick and exceeds the strength requirements of ASTM C 387. Just add water, mix, and use.