50 lb.

Granusil^® Mineral Filler

Granusil® Mineral Filler is produced from high purity industrial quartz sands for a wide variety of industrial and contractor mixed applications which need a reliable silica contribution or require a chemically inert structural filler.  The durable monocrystalline structures resist abrasion in high traffic-excessive wear applications. Granusil® Mineral Filler 5020 (BOM #100365) is available in 50 lb. bag and Granusil® Mineral Filler 4030 (BOM #114261) is available in 50 lb. bag.

**Pack quantities may vary based on the manufacturing facility. Please verify the number of bags per pallet with your salesperson or contact us. 

PowerLoc^™ Jointing Sand

Quikrete® PowerLoc™ Jointing Sand is a polymer-modified graded sand for filling between interlocking pavers, brick, patio blocks and concrete slabs. Once PowerLoc™ Jointing Sand is swept into the paver joints and dampened with a water mist it hardens, locking pavers into place.

Quikrete^® All-Purpose Gravel

Quikrete® All-Purpose Gravel (BOM #105521) is a multi-use product for a variety of decorative and landscaping applications. Also for making concrete.

Quikrete^® FastSet^™ Self-Leveling Floor Resurfacer

High Performance Cement FastSet™ Self-Leveling Floor Resurfacer (BOM #110439) is a self-finishing interior & exterior floor topping and underlayment specially formulated to work without troweling. High Performance Cement FastSet™ Self-Leveling Floor Resurfacer produces a smooth surface ready for the installation of ceramic tile, resilient flooring, carpet or other finishes. FastSet™ Self-Leveling Floor Resurfacer can also be used as a wear surface for light duty industrial floors. Following are typical substrates: • Precast concrete plank • New concrete floor slabs with unacceptable finishes • Existing concrete floors with damaged finishes • Over wood floor systems, utilizing expanded metal lath reinforcement • FastSet™ Self-Leveling Floor Resurfacer may be used for outdoor service

Rapid Patch^® Self-Leveling Resurfacer

Rapid Patch Self-Leveling Resurfacer (BOM #103145) is a cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for light industrial floors where a hard, flat smooth surface and a quick return to service is desired. Also use as an underlayment for installation of ceramic tile, stone, resilient flooring, carpet, or other finished flooring. Typical substrates include: fully cured concrete, APA rated exterior grade/exposure 1 plywood or OSB underlayment grade equivalent with expanded wire lath reinforcement. Install from feather edge to 2 in. (50 mm) thick.

Sakrete^® 5000 Plus High Strength Concrete Mix

Sakrete® 5000 Plus Concrete Mix (BOM #120020) is a professional grade concrete mix used for building and repairs greater than 2" depth.

Sakrete^® Pro-Mix All-Purpose Cement Mix

Pro-Mix™ All-Purpose Cement Mix is a fast setting, high performance concrete repair material that is shrinkage compensating, and high strength. Just add water to produce an easy to use mix ideal for repairs where short down times are critical and high durability and rapid strength are needed. Available in 20 lb. pails (BOM #113014) and 50 lb. bags (BOM #112704).

Tenon^® Rapid Strength Construction Grout LT

Tenon® Rapid Strength Construction Grout LT is a uniquely formulated non-corrosive, cementitious, flowable construction grout. It is designed for extreme duty applications where early strength, fast setting strengths at low temperatures are required.

Waukesha Field Marking Lime

Waukesha Field Marking Lime (BOM #101145) is good for turf, harmless to skin and clothing, produces a whiter line, is easy to apply, and is preferred by coaches & groundskeepers.

NorthRock^® Mountain Blend

NorthRock® Mountain Blend Rock (BOM #106000) is a versatile blend of colors which will compliment any home or landscape. Use for any landscape project including gardens, paths, ponds, tree rings, or edging around your home or shed. **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Rapid Patch^® Concrete Repair Mortar

Rapid Patch® Concrete Repair Mortar (20 lb. BOM #129460, 50 lb. BOM#129470) is a fast-setting, high-performance, multi-use blend of hydraulic cement, polymers, fine aggregates, and special additives used for concrete repair and new construction where high early strength, excellent durability, and low shrinkage is required. Mix with water for applications from ½ in. minimum to 6 in. maximum thickness (1.3-15 cm).

Sakrete^® Ash Tray Sand (Black)

Sakrete® Ash Tray Sand - Black (BOM #120017) is a non-flammable granular dry powder used to fill ashtray vestibules and containers used for extinguishing cigarettes and cigars. Economical to use, can be sifted to remove butts and ends. Ash Tray Sand will not burn.

NorthRock^® Multi-Purpose Gravel

NorthRock® Multi-Purpose Gravel (BOM #104103) can be used as a decorative landscape rock for gardens, pathways, ponds, borders or for a variety of uses around the house, such as drainage, trench bedding or backfilling applications. Bag Size: ½ Cubic Foot  **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Rapid Patch^® Multi-Purpose Repair

Rapid Patch® Multi-Purpose Repair (20 lb. BOM #129440, 50 lb. BOM #129450) is a fast-setting, high-performance, multi-use blend of hydraulic cement, fine aggregates, and special additives used for concrete repair and new construction, including casting, anchoring, grouting, and wet environments. Adheres to concrete, stone, masonry, and stucco. Mix with water for applications from feather-edge to 4 in. (10 cm).

Sakrete^® Ash Tray Sand (Off White)

Sakrete® Ash Tray Sand - Off White (BOM #120016) is a non-flammable granular dry powder used to fill ashtray vestibules and containers used for extinguishing cigarettes and cigars. Economical to use, can be sifted to remove butts and ends. Ash Tray Sand will not burn.

Tenon^® Air-Entrained Concrete Patching Mix AE

Tenon® Air-Entrained Concrete Patching Mix AE (3U58M) (BOM #126199) is an ideal material for repairing concrete pavement, bridge decks, industrial floors, concrete parking lots, and garage decks. This pre-blended mixture of cement, aggregate, and special additives will produce a high strength concrete repair material that is extremely durable and works well in harsh environments. Additionally, when used with Tenon Fast-Set Liquid Activator, surfaces can be reopened to traffic within 4 to 5 hours under typical conditions.

NorthRock^® Nordic Stone

NorthRock Nordic Stone rock (BOM #112713) is a blend of vibrant colors that help retain moisture and helps deter weed growth. It makes for a great decorative accent to any garden or landscape. It provides lasting beauty and comes in 1/2 cubic foot bags for ease in placement.  **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Quikrete^® Black Top Patch

Quikrete® High Performance Blacktop Patch (BOM #109958) is a specifically-formulated, commercial-grade, asphalt cold-patch material for repairing potholes and cracks over 1" (25.4 mm) wide in asphalt pavements. It is suitable for use on roads, driveways, parking lots, and walkways. All-season formulation is suitable for making permanent repairs in wet or dry conditions.

NorthRock^® Paver Base

NorthRock® Paver Base (BOM #106100) is screened before packaging. This product is ideal for forming a base and underlayment for concrete block or brick, paving stones, patio stones, edgers, and segmental retaining walls. This sand is the proper grade for drainage and provides great durability where the ground has potential to freeze. Bag Size: ½ Cubic Foot  **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

TCC Materials^® Iowa DOT Concrete Patch Mix

TCC Materials® Iowa DOT Concrete Patch Mix (BOM #104912) is a low-slump concrete primarily used for bridge deck overlays and concrete pavements. Produces a high-strength concrete repair material that is extremely durable and works well in harsh environments. Use for both full-depth and partial-depth applications.

Tenon^® Blend-Pro^™

Tenon® Blend-Pro™ is a fast-setting, one component, polymer-modified, calcium aluminate cement-based concrete and masonry patching compound designed for vertical and overhead repair applications.
Available in #3-15 Light Gray (BOM# 113529, 121158), #3-30 Light Gray (BOM# 113532, 114797).

Akona^® Crack-Resistant Surface Bonding Cement

Akona® Crack-Resistant Surface Bonding Cement is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete. Available in Gray (BOM #102614).

NorthRock^® Paver-Leveling Sand

TCC Materials® NorthRock® Paver Leveling Sand (BOM #103130) should be used on top of paver base beneath the masonry pavers allowing the installer to level out the pavers. This product will make the patio more stable and assists in proper drainage. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Quikrete^® Concrete Mix

Quikrete® Concrete Mix (BOM #100389) is the original 4,000 psi average compressive strength blend of Portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. Designed for pouring concrete 2" thick or more or building/repairing concrete structures. Available in 80 lb. bags (BOM #100389), 60 lb. bags (BOM #101356), and 40 lb. bags (BOM #104606). Approximate Yield: 80 lbs. = 0.60 cu. ft. 60 lbs. = 0.45 cu. ft.

NorthRock^® Pea Gravel

NorthRock® Pea Gravel (BOM #106095) is a high quality clean gravel with an approximate top size of 3/8". Can be used for a variety of applications such as for landscaping or decorative projects. It can also be used for making concrete. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

TechMix^® Fast-Setting Concrete Mix

TechMix® Fast-Setting Concrete Mix (BOM #104877) is a specially formulated accelerated setting, high early strength mortar for use in applications of 2" thick or greater.

NorthRock^® Play Sand

NorthRock® Play Sand (BOM #106090) is screened and washed before packaging. This product is ideal for use in children’s sand boxes, gardens, retaining walls or between concrete or brick pavers. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Akona^® Foundation Coating Cement

Akona® Foundation Coating Cement (BOM #102621) is a specially-formulated, cement-based product for coating and protecting polystyrene insulation board or insulated concrete forms (ICF) from weathering, ultraviolet rays, and general wear/impact. Akona Foundation Coating Cement is polymer-modified and contains fibers which reduces shrinkage and improves the adhesion properties of the product. Akona Foundation Coating Cement is easy to apply by masonry brush or trowel and has the superior durability of a Portland cement-based product. It also provides a tough, durable gray textured or stucco-like finish. If desired, the product may be integrally colored with a liquid cement or mortar colorant, or it can be painted to match existing home design.

NorthRock^® Premium White Rock

NorthRock® Premium White Rock (BOM#112243) is a decorative landscape stone that adds beauty and protects your yard by keeping down weed growth and controlling erosion. The beauty of natural stone is great for enhancing your landscape around trees, shrubs, flowerbeds, ponds, and foundations. **NorthRock's aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Akona^® Heavy-Duty Waterproofing Base Coat

Akona® Heavy-Duty Waterproofing Base Coat (BOM #102624) is a Portland cement-based, waterproof coating for use over concrete, block, brick or stucco surfaces. Use for interior or exterior coating of foundation, basement or retaining walls below or above grade. When applied over non-uniform areas, this product provides a smooth or textured surface that can be left as a finished decorative coating. In addition, this product can serve as a base coat for paint or similar faux finishes. Please note that this product needs to be mixed with a mixture of water and Akona Concrete Bonding Additive (sold separately, BOM #102659).

NorthRock^® Red Lava Rock

TCC Materials® NorthRock® Red Lava Rock (BOM #100618) is a lightweight, porous, decorative volcanic rock with a unique aesthetic appeal. Its deep burgundy color will enrich the look of your landscape project including flower beds, tree rings, and other accent applications. **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Tenon^® Concrete Patching Mix

Tenon® Concrete Patching Mix (BOM #126198) is a dry mixed combination of Portland-limestone Cement and aggregates that is proportioned and manufactured according to MnDOT specification 3105 for grade 3U18. When mixed according to specifications with water and admixtures, it is an ideal mixture for repairing concrete pavement, industrial floors, and structural concrete.

NorthRock^® River Cobble

TCC Materials® NorthRock® River Cobble (BOM #103787) is a 2" rock that helps retain moisture and can prevent weed growth. It makes for a great decorative accent to any garden and is intended for use in yards or around ponds. It provides lasting beauty and comes in ½ cubic foot bags for ease in placement. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Tenon^® Concrete Resurfacer

Tenon® Concrete Resurfacer (BOM #120728) is a fast-setting, high-performance polymer-modified, cement-based product used for resurfacing old concrete to make it look new again. Applications from feather edge to ½ in. (2-13 mm). Fast-drying, walkable on average in 2 hours.

NorthRock^® River Pebble

NorthRock® River Pebble (BOM #103786) is a ¾" rock that helps retain moisture and can prevent weed growth. It makes for a great decorative accent to any garden and is intended for use in yards or around ponds. It provides lasting beauty and comes in ½ cubic foot bags for ease in placement. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Quikrete^® Fast-Setting Concrete Mix

Quikrete® Fast-Setting Concrete Mix (BOM #100166) is a special blend of fast-setting cements, sand and gravel designed to set hard in approx. 20 to 40 minutes. Sets posts without mixing. Pour dry mix into hole and soak with water. Use for setting fence posts, mailbox posts, basketball posts, deck posts, or lamp posts. Or use to construct new steps, sidewalks, or concrete appliance pads.

TCC Materials^® Tube Sand

TCC Materials® Tube Sand is ideal for adding weight and traction to your vehicle in winter driving conditions. The tube-shaped bag fits along wheel wells, above the rear axle, or in pick up truck beds. The sand is dried and in a weather-proof bag to resist freezing. Available in 60 lb. bags (BOM #106610).

NorthRock^® River Rock

NorthRock® River Rock (BOM #106097) is a 1½" rock that helps retain moisture and can prevent weed growth. It makes for a great decorative accent to any garden and is intended for use in yards or around ponds. It provides lasting beauty and comes in ½ cubic foot bags for ease in placement. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Quikrete^® Glass Block Mortar

Quikrete® Glass Block Mortar (BOM #100710) is a specifically formulated blend of white sand, cement, lime and other waterproof additives designed to provide a decorative, waterproof joint. Exceeds the performance requirements of ASTM C270 for Type S Mortar. Just add water.

TechMix^® Mason Sand

TechMix® Mason Sand (BOM#112144) is a consistent properly graded, fine, washed, and dried masonry sand. Refer to ASTM C270 for more information.

Tenon^® Construction Grout

Tenon® Construction Grout is a non-shrink, non-metallic, Portland-limestone cement-based mixture of hydraulic cement, aggregate, and additives for general purpose structural grouting. Meets or exceeds ASTM C-1107. Available in 50 lb. bags (BOM #120720) and 3000 lb. bags (BOM #113219).

NorthRock^® Weed-Blocker

Weed-Blocker Paver Locking Sand (BOM #109551) is a specially formulated polymer modified joint sand for use with pavement systems utilizing segmental concrete pavers, clay pavers or natural stone; concrete slab joint applications or filling gaps between segmental retaining wall blocks. Designed for average joint widths of 1/4" to 3/8" wide, Paver Locking Sand becomes activated when combined with water, and needs to be applied as a dry polymeric sand to dry surfaces.

WESTERN LIME MIRACLE HYDRATED MASONRY LIME – TYPE S

Type S Dolomitic Hydrated Masonry Lime (BOM #101062) meets ASTM C207 and is available in 50 lb. bags. For more information on our lime, please contact your sales representative.

NorthRock^® Western Sunset

NorthRock® Western Sunset Rock (BOM #100609) is a blend of vibrant colors to make your landscape project look sharp. The natural beauty of Western Sunset will not fade and can be used in place of mulch or alternative ground cover. **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Quikrete^® Mason Sand

Quikrete® Mason Sand (BOM #108572) is a fine, dried sand used as a component in masonry mortar when mixed with masonry cement type N, M, S, or O. Masonry sand can also be used for many other applications where a fine sand is necessary.

Sakrete^® Crack Resistant Concrete Mix

Formulated to reduce the risk of surface shrinkage cracks, Sakrete Crack Resistant Concrete Mix is a professional strength blend of cementitious materials, sands, stone and fibers. For repair and building jobs where concrete thickness exceeds 2”.

TechMix^® Max Strength Concrete Mix

TechMix® Max Strength Concrete Mix (BOM #110259) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprietary performance additives designed to provide extended working time and high early strength for concrete applications requiring a minimum thickness of 1½ in. (38 mm). Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack resistance and increased toughness.

NorthRock^® White Marble

TCC Materials® NorthRock® White Marble (BOM #100615) offers a clean, bright alternative to River Rock or mulch.  White Marble is great for landscaping, and is also commonly used for interior decorative projects, crafts, and aquariums. **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Akona^® Non-Shrink Grout (6,700 PSI)

Akona® Non-Shrink Grout (BOM #104953) is a pre-blended, pourable, non-metallic, Portland-cement based material used for grouting steel columns, bearing plates, precast concrete and anchors. Our Non-Shrink Grout compensates for an uneven foundation, distributes the weight of the unit, and prevents shifting after settling and leveling the unit. Akona Non-Shrink Grout is composed of aggregates, Portland cement and other additives to create an interior or exterior grout with non-shrinking characteristics capable of handling high-load transfers. Meets ASTM C1107 and is MN, WI, and NE DOT approved.

NorthRock^® White Play Sand

TCC Materials® NorthRock® White Play Sand (BOM #105662) is screened and washed before packaging. This product is a light tan color and is ideal for use in children’s sand boxes, crafts, gardens, retaining walls or between concrete or brick pavers. Bag Size: ½ Cubic Foot **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Quikrete^® Play Sand

Quikrete® Premium Play Sand® (BOM #101043) is a specially-graded, washed sand that has been dried and screened, for children’s sand boxes.

Sakrete^® Fast Setting Cement Patcher

Sakrete® Fast Setting Cement Patcher is used for horizontal, vertical, and overhead repairs where an accelerated set-time is needed. Use for applications of ½ inch featheredge. Fast Setting Cement Patcher is available in a 50 lb. pail (BOM #120029), and a 10 lb. box (BOM #120028).

Akona^® Polymer-Modified Concrete Resurfacer

Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength product has superior bond and is trowelable to from 1/4 in. down to 1/8 in. (6 to 3 mm). It may be trowel or broom finished, and is available in a 25 lb. bag (BOM #102642).

TechMix^® Multi-Purpose Utility Sand

TechMix® Multi-Purpose Utility Sand (BOM #101004) is produced from high-purity industrial quartz for a use in a wide variety of applications that require a chemically inert, durable structural filler such as floor overlays, finish coat stucco, and sports turf. With consistently uniform grain shapes and particle distribution, this basic building material offers excellent compaction, placement, and mechanical properties. The high silica content is combined with low level soluble ions, alkalis, and alkaline oxides to provide non-reactive service in most corrosive and exposed environments.

Sakrete^® Fast Setting Self-Leveling Resurfacer

Sakrete® Fast Setting Self-Leveling Resurfacer (BOM #120423) is a rapid setting cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for residential and light foot traffic industrial floors where a hard, flat, and smooth surface is desired. Applications from 1/8" to 1" and can be featheredged to adjoining elevations. 

Akona^® Medium-Duty Refractory Mortar

Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQ's, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.

Quikrete^® Precision Non-Shrink Grout

Quikrete® Non-Shrink Precision Grout (BOM #100713) is a high-strength, non-metallic grout designed for precision grouting and general construction applications. Simply add water and mix to obtain flowable properties and high strengths. Its non-shrink characteristics make it stable and capable of handling high load transfers. This grout can be mixed to a plastic, flowable or fluid consistency to for grouting pre-cast concrete, heavy equipment, bearing plates, steel columns, and anchoring applications. At 28 days the compressive strengths reach 14,000 psi at a plastic consistency, 12,000 psi at a flowable consistency, and 8000 psi at a fluid consistency. Complies with ASTM C1107 and Army Corp of Engineers CRD 621.

Sakrete^® Flo-Coat Concrete Resurfacer

Sakrete® Flo-Coat Concrete Resurfacer (BOM #120034) is a polymer-modified sand and cement mix for resurfacing concrete from 1/8 inch to 1/4 inch depth. Can be applied in a flowable consistency using a squeegee or in a stiffer consistency using a trowel.

TechMix^® Pool Filter Sand

TechMix® Pool Filter Sand (BOM #100468) is a finely-graded, clean, dry, silica sand specially formulated for use in swimming pool filters.

Tenon^® High Strength Precision Grout

Tenon® High Strength Precision Grout (BOM #120707) is a ready-to-use, high-strength, flowable precision grout mix with excellent working time and early strength ensuring quick job startups and reducing cost. This specially-formulated mix can be pumped into areas inaccessible by conventional grouting methods. High Strength Precision Grout is a non-shrink, non-metallic, non-staining, non-porous, high-density, pumpable formula designed for precision grouting applications and can be extended with the proper aggregates up to 50%.

• Highly-fluid grout with excellent working time and early strength
• Non-shrink, non-corrosive, non-staining, non-porous, and non-metallic
• Applicable Standards: ASTM C-1107 and CRD-C 621

Akona^® Self-Leveling Floor Underlayment Cement

Akona® Self-Leveling Floor Underlayment Cement (BOM #104623) is a free-flowing mortar for use where a level surface is necessary prior to installing floor coverings. This ground-breaking formula has a dry, integral primer mixed so you no longer need to spend the additional money, time, and labor on adding an additional primer liquid. Our Self-Leveling Floor Underlayment Cement requires a minimum amount of labor to produce a smooth, level surface that is ready for installing floor coverings such as ceramic tile, marble, wood and carpet within 24 hours and resilient flooring after 72 hours. It is also ideal for encapsulate radiant heating installations. This product is designed for interior applications from ⅛" up to 1" thick.

Tenon^® Instant Anchoring Cement

Tenon® Instant Anchoring Cement is a quick-setting, anchoring cement compound used for setting poles, railings, bolts, and fixtures in concrete or masonry. Suitable for interior or exterior use. Expands as it hardens to set securely and lock in place for strong support. Any metals that will corrode when exposed to wet cement, such as aluminum, must be protected.   Available in 10 lb. (BOM #129940) and 50 lb. pails (BOM #120998).  

Sakrete^® High Heat Mortar

Sakrete® High Heat Mortar (BOM #120996) is a dry, medium-duty mortar ideal for setting masonry units in fireplaces, fire pits, or chimney applications such as setting clay flue liners and parging a smoke chimney chamber. High heat resistance for appications up to 2550°F and excellent strength properties.

Tenon^® Instant Hydraulic Cement

Tenon® Instant Hydraulic Cement is a quick-setting hydraulic cement compound used primarily as a water stop or hole filler. It expands when set and locks into place to block flowing water in 3 to 5 minutes. For use only on concrete and masonry materials. Best for repairing leaks in cracks between blocks or on one surface, not for stopping water flow in corners.  Available in 10 lb. (BOM #129950) and 50 lb. (BOM #128280) pails. 

Akona^® Glass Block Mortar

Akona® Glass Block Mortar (BOM # 102627) is a specially-formulated blend of select white silica sands, white cement and workability agents which result in an easy-to-handle, high strength mortar. It is designed for installing glass block windows, shower and bath walls or masonry units where a white mortar is desired. This product is suitable for both interior and exterior applications.

Tenon^® Level-Flo^® 100

Tenon® Level-Flo^® 100 (BOM #120534) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied from ⅛"-2" (3-51 mm) neat and up to 5" (127 mm) extended.. Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings in 3 days. Use with Level-Flo Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.

Sakrete^® High Strength Concrete Mix

Sakrete® High Strength Concrete Mix (BOM #100171 = 60 lb. bag / #120021 = 50 lb. pail / #101090 = 80 lb. bag) is designed for anchoring posts and poles, and pouring footings and slabs. High Strength Concrete Mix is premium quality for consistent strength and durability and meets ASTM C 387 strength requirements for structural applications. Uses include building walks, drives, slabs and steps as well as anchoring posts and poles. High Strength Concrete Mix is for applications requiring at least 2 inches in thickness. Just add water, mix, and use.

Tenon^® Level-Flo^® 200

Tenon® Level-Flo^® 200 (BOM #120535) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. Can be applied from ⅛"-2" (3-51mm) neat, and up to 5" (127 mm) extended. Fast-setting, accepts non-moisture sensitive tile and stone in as little as 4 hours, and moisture sensitive floor coverings in 16-24 hours. Use with Level-Flo Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.

Sakrete^® Leak Stopper Hydraulic Cement

Sakrete® Leak Stopper Hydraulic Cement (BOM #120030) stops the flow of water through breaks in concrete or masonry walls and floors. Rapid setting, with initial set-time of 1-3 minutes, and final set in 3-4 minutes.

Tenon^® Level-Flo^® 300

Tenon® Level-Flo^® 300 (BOM #120536) is a high-performance, high-strength, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. It’s designed for maximum flow and seamless merging with every pour and is ideal for fast track applications.

Akonakote^® Pourable Concrete Patch

Akonakote® Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.

Sakrete^® Mortar-Stucco Mix Type S

Sakrete® Mortar-Stucco Mix Type S is a contractor-grade mortar mix for laying brick, block, and stone in load-bearing walls and construction above or below grade level. It can also be used as a scratch and brown coat in stucco application. Just add water, mix, and use. Available in 80 lb. bag (BOM #100531) and 50 lb. pail (BOM #120023)

Sakrete^® Non-Shrink Construction Grout

Sakrete® Non-Shrink Construction Grout (BOM #120024) is a non-shrink, non-metallic, Portland cement based material with special additives designed with high flexural and compressive strength to handle high-load transfers. Used for grouting of machinery bases, bearing plates, pre-cast concrete, columns, beams and other anchoring applications.

Sakrete^® Non-Shrink General Purpose Grout

Sakrete® Non-Shrink General Purpose Grout (BOM #120025) is a commercial grade non-metallic Portland cement based structural hydraulic cement for high-strength grouting.

Tenon^® Metro Mix^™

Tenon® Metro Mix™ (BOM #128260) is a high performance concrete mix engineered to meet commercial/industrial ready mix specifications. Super plasticized for higher slump and compressive strengths with corrosion inhibitors. Ideal for projects requiring small structural concrete applications or when ready mix truck access is restricted. Use for structural applications and full depth repairs of 2" (51 mm) or greater. Exceeds ASTM C 387.

Tenon^® Metro Mix AE

Tenon® Metro Mix AE (BOM #128270) is the air-entrained version of our high performance concrete mix engineered to meet commercial/industrial ready mix specifications. Super plasticized for higher slump and compressive strengths with corrosion inhibitors. Ideal for projects requiring small structural concrete applications or when ready mix truck access is restricted. Use for structural applications and full depth repairs of 1½" (51 mm) or greater. Exceeds ASTM C 387.

Tenon^® Partial Depth Concrete Patch

Tenon® Partial Depth Concrete Patch is is ideal for placing overlays less than 2” deep (5 cm). This pre-blended cement and oven dried sand mixture will produce a high-strength concrete repair material that is extremely durable in partial depth applications such as concrete pavements, bridge decks, industrial floors, concrete parking lots and garage decks. It is also used for adhering pavers to concrete steps and walks, patching and/or leveling concrete surfaces, filling large cracks, and filling cores in masonry block or brick. Available in 2:1 mix (BOM #120722), 2.5:1 mix (BOM #120723), or 3:1 mix (BOM #120724) (fine sand aggregate to Portland cement ratio).

Sakrete^® Self-Consolidating Concrete Mix

Sakrete® Self-Consolidating Concrete Mix (BOM #110768) is a dry, preblended, one-component, self-consolidating, cementious, polymer-modified concrete mix containing coarse aggregate, silica fume, and an integral migrating corrosion inhibitor. Designed for application thickness minimum of 1" and maximum thickness of 8".

Sakrete^® Self-Leveling Underlayment

Sakrete® Self-Leveling Underlayment (BOM #120035) is a polymer-modified Portland cement based self-leveling underlayment for interior applications up to 1 inch in a single pour. For use over properly prepared concrete and plywood floors. Can be used under ceramic tile, stone, carpeting, VCT, wood flooring and other materials. Not designed as a direct wearing surface. May also be used to encapsulate radiant heating installations.

Sakrete^® Top ‘n Bond Concrete Patcher

Sakrete® Top 'n Bond Concrete Patcher (BOM #120031 = 10 lb. / #120032 = 50 lb.) is a polymer-modified sand-cement repair mortar for resurfacing, patching, and general concrete repairs from ½ inch to featheredge. Requires only the addition of water.

TechPro^® Polymer-Modified Stone Veneer Base Coat

TechPro® Polymer-Modified Stone Veneer Base Coat (BOM #120442) is used as a scratch and base coat for real or manufactured stone veneer units. Also referred to as a cement plaster coating, it is a blend of cementitious materials, dried sand, and special performance admixtures designed to produce a highly-bondable substrate and to optimize consistency between batches. Special admixtures help create both a mechanical and chemical bond to the substrate with excellent workability and non-sag performance. Polymer-modified, mix with water only. "Step 1" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Can be applied over TechPro Moisture Barrier or directly to fully cured concrete.

Tenon^® Pourable Concrete Patch

Tenon® Pourable Concrete Patch (BOM #120672) is a Portland cement-based, flowable, squeegee-grade, polymer-modified patching and resurfacing mix for interior and exterior horizontal concrete substrates. Easy to use, it corrects defects up to ½ in. (13 mm) on concrete surfaces prior to applying new flooring materials or coatings. Depending on application, can also be used as a wearable surface for residential and light duty commercial applications. Meets ASTM C387 “Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete” for normal weight concrete.

Tenon^® Rapid Patch^® 100

Tenon® Rapid Patch® 100 (BOM #120970) is a fast-setting, fiber-reinforced, high strength, cement-based repair mortar designed for applications where high early strength gain is needed to reduce down time. Apply neat from 1/2" to 2" deep, can be extended for repairs greater than 2" deep. 

Tenon^® Rapid Patch^® 200

Tenon® Rapid Patch® 200 (BOM #120971) is a rapid-setting, fiber reinforced, high strength, polymer-modified cement mortar designed for concrete repair and overlay applications requiring high durability. Apply neat from 1/2" to 2" deep, or can be extended for repairs greater than 2" deep. Wide temperature range for application.

Tenon^® Masonry Veneer Mortar PM

Tenon® Masonry Veneer Mortar PM (Polymer-Modified) (BOM #120461) is a high-performance, multi-purpose, polymer-modified mortar, used for both traditional thick bed scratch and base coats and as the bonding mortar for installing real or manufactured masonry veneer units. A blend of cementitious materials, oven-dried sand, and special performance admixtures, our Pro Veneer Technology (PVT) creates both a mechanical and chemical bond to the substrate, significantly outperforming standard Type S and N mortars. Can also be used for grouting, yet is excellent for applications such as dry stack where mortar joints are not used. Meets the requirements of ASTM C 1714, ASTM C270, ANSI 118.4, and ACI 530 Shear Bond Standards.

Tenon^® Self-Leveling Resurfacer

Tenon® Self-Leveling Resurfacer (BOM #121017) is a polymer-modified, cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for light industrial floors where a hard, flat smooth surface and a quick return to service is desired. Also use as an underlayment for installation of ceramic tile, stone, resilient flooring, carpet, or other finished flooring. Typical substrates include: fully cured concrete, APA rated exterior grade/exposure 1 plywood or OSB underlayment grade equivalent with expanded wire lath reinforcement. Install from feather edge to 1 in. (25 mm) thick.

Tenon^® Vertical Repair CI

Tenon® Vertical Repair CI (BOM# 113810) is a polymer modified, high-strength, fast-setting, non-shrink, patching material for commercial and industrial vertical and overhead holes in concrete or masonry. Can be shaved or molded to required shapes.

Note: Also available without corrosion inhibitor (BOM# 126171).

Tenon^® Rapid Strength Concrete Mix SE

Tenon® Rapid Strength Concrete Mix SE (BOM #120965) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprietary performance additives designed to provide extended working time and high early strength for concrete applications requiring a minimum thickness of 1.5 in. (38 mm). Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack resistance and increased toughness.

Tenon^® Rub-Pro^™

Tenon® Rub-Pro is a one-component, polymer-modified, Portland cement-based, interior and exterior resurfacer designed for smoothing and filling vertical and overhead concrete and masonry surfaces. Available in #3 light gray bag (BOM #128180) and light gray pail (BOM# 121153).

Tenon^® Self-Consolidating Concrete Mix CI

Tenon® Self-Consolidating Concrete Mix (SCC) CI (BOM #112026) is a dry, preblended, one-component, self consolidating, cementitious, polymer-modified concrete mix containing coarse aggregate, silica fume, and an integral migrating corrosion inhibitor. Designed for application thickness minimum of 1 in. (2.5 cm) and maximum thickness of 8 in. (20 cm). Also available with integral water repellent (IWR) Tenon Self-Consolidating Concrete Mix (SCC) CI/IWR (BOM 114393).

Tenon^® Tile Crete^® Floor Mud

Tenon® Tile Crete® Floor Mud Underlayment Mix is a blend of cementitious material and oven-dried sand designed to produce a highly-bondable substrate and to optimize consistency between batches. Use as a setting bed/underlayment for ceramic, mosaic, stone, quarry, and paver tile over concrete or wood substrates including countertops. Ideal for forming shower pans and curbs as well as installations requiring a slope to drain.

Tenon^® Underground Utility Mortar

Tenon® Underground Utility Mortar 50 lb. (BOM #120704) and 80 lb. (BOM #114181) is a is a dry, preblended, air-entrained mortar mix containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. This product meets ASTM C270 and ASTM C1714 requirements.

Tenon^® Vinyl Concrete Patch

Tenon® Vinyl Concrete Patch a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather-edge to 2 in. (51 mm) thick per lift. Typically supports foot traffic in 8-12 hours, wheeled traffic in 48 hours. Available in 10 lb. pail (BOM #127634) and 50 lb. bag  (BOM #120681).