Masonry Repair

  • Akona Power Patch Pro

    Akona® Power Patch Pro

    Akona Power Patch Pro is a high-strength, non-sag, two component epoxy used to bond, repair, or fill blemishes in concrete, brick, wood, and stone and can be used for both overhead and vertical repairs. The application temperature range is between 40°F-100°F (4°C-38°C)

  • Akona Wet/Cold Concrete & Masonry Loc

    Akona® Wet/Cold Concrete & Masonry Loc

    Akona® Wet/Cold Concrete & Masonry Loc is a two component, non-sag, high-performance anchoring adhesive for use down to 15°F (-9°C). Great for bonding new concrete to existing concrete, repairing structural cracks in concrete surfaces, and adhering dowel bars and tie bars for full depth concrete repairs.

  • Rapid Patch Rapid Loc Concrete & Veneer Bond

    Rapid Patch® Rapid Loc Concrete & Veneer Bond

    Rapid Patch® Rapid Loc™ Concrete & Veneer Bond is an innovative high-grab sealant which has high initial tack to hold materials in place while the adhesive cures, specifically designed for adhering stone, ceramic tile, and other construction materials to vertical surfaces. Rapid Loc Concrete & Veneer Bond is based on silyl-modified polymer technology that cures on exposure to atmospheric moisture to form a fast, tough, durable adhesive. Rapid Loc Concrete & Veneer Bond exhibits excellent adhesive properties to most common substrates including stone, brick veneer, aluminum, brass, vinyl, steel, stainless steel, glass, mirrors, mortar, concrete, wood, OSB, plywood, ceramic tile, brick, foam board, pavers, painted surfaces, fiberglass, and many plastics. Rapid Loc Concrete & Veneer Bond is highly weather resistant, remains flexible in low temperature extremes, and can be painted with most paints. Available in 9.5 oz. tube (BOM #130170).

  • Spec Mix Mortar

    Spec Mix® Mortar

    Spec Mix® Portland Lime & Sand Mortar is a dry, preblended mortar mix containing Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #101212), Type S (BOM #101013), Type M (BOM #101320), and Type O (BOM #107500). PCL Sand is also available with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags Type N (BOM #100316), Type S (BOM #101455), Type M (BOM #101456), and Type O (BOM #109618) to work with our silo system. Please contact your salesperson for more information.

    For jobsites with air-quality concerns, consider our LOW-DUST Mortar Option.  For more information, please contact your salesperson for location availability and pricing.

  • Akona Crack-Resistant Surface Bonding Cement

    Akona® Crack-Resistant Surface Bonding Cement

    Akona® Crack-Resistant Surface Bonding Cement is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete. Available in Gray (BOM #102614).

  • Spec Mix Mortar

    Spec Mix® Mortar – White

    Spec Mix® Portland Lime & Sand White Mortar is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #106425), Type S (BOM #106257), and Type O (BOM #108645). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Spec Mix Mortar

    Spec Mix® Mortar (w/ Silica Sand) – White

    Spec Mix® Portland Lime & Sand White Mortar w/ Silica Sand is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried silica sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #107615), Type S (BOM #107134), and Type O (BOM #109740). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR). Also available in 3,000 lb. (BOM #107138) bulk bags Type N (BOM #106413), and Type S (BOM #105376) to work with our silo system. Please contact your salesperson for more information.

  • Akona Instant Water Stop

    Akona® Instant Water Stop

    Akona® Instant Water Stop is a quick-setting, hydraulic cement compound used primarily as a water stop or hole filler on concrete or masonry materials. It is formulated to expand when set and locks into place to block flowing water within 3 to 5 minutes. Instant Water Stop bonds to wet walls and is ideal for patching cracks and leaks in swimming pools and is available in 10 lb. bags (BOM #102635) and 25 lb. bags (BOM #102636)

  • TechMix Masonry Cement

    TechMix® Masonry Cement

    Tech Mix® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #100920) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM #100917) is designed for structural above-grade or below-grade application and comes in a 75 lb. bag. Type M Masonry Cement (BOM #100868) is used for structural, below-grade, load-bearing walls where higher compressive strengths are needed and comes in a 70 lb. bag.

  • Akona Mortar Repair

    Akona® Mortar Repair

    Akona® Mortar Repair (BOM #103174) is designed for tuck-pointing, repairing, and sealing mortar joints and cracks in masonry units such as stone, brick and block walls. The product is gray in color and designed to blend in with the texture of surrounding mortar. Our durable, pre-mixed Mortar Repair is a sanded, latex-based polymer formulation that dries quickly, is paintable, and provides superior adhesion to masonry.

  • Quikrete® Mortar Mix – Type N

    Quikrete® Mortar Mix (BOM #100533) is a blend of masonry cement and graded sand, designed to meet ASTM C 270 for Type N Mortar. Just add water and mix to construct or repair block, brick, or stone structures like walls, pillars, barbecues, planters, and for tuck-pointing mortar joints.

  • Spec Mix Stone Veneer Mortar - Joint Grout

    Spec Mix® Stone Veneer Mortar – Joint Grout

    Spec Mix® Stone Veneer Joint Grout (BOM #108404) is a blend of dry, cementitious materials, and masonry sand specifically designed to fill the joints between various precast, lightweight, masonry veneer systems. TCC Materials also offers SPEC MIX joint grout made with white cement and/or with integral color. Also available in 3,000 lb. (BOM #102310) bulk bags to work with our silo system. Please contact your salesperson for more information.

  • Akona® Medium-Duty Refractory Mortar

    Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQ's, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.

  • Quikrete® Surface Bonding Cement

    Quikrete® Quikwall Surface Bonding Cement is an alkali-resistant, fiberglass-reinforced, Portland cement based, surface bonding cement used for construction of dry-stack (without mortar) cement block walls. Available in Gray (BOM #101359) and White (BOM #100246). Add color with Quikrete® Stucco & Mortar Color.

  • Akonaseal Non-Sag Masonry/Joint Sealant

    Akonaseal® Non-Sag Masonry/Joint Sealant

    Akonaseal® Masonry/Joint Sealant (BOM #104561) is a premium-grade, multipurpose, moisture-cure sealant, designed to meet the flexibility requirements of dynamically moving cracks and joints, this texturized, gray mortar-colored sealant is ideally suited for vertical concrete, stucco or masonry applications with a maximum joint of 1½"W x ¾"D and can be painted with a latex paint when cured. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant.

  • Tenon Masonry Veneer Joint Grout

    Tenon® Masonry Veneer Joint Grout

    Tenon® Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and dried sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Tenon Pro Veneer Technology (PVT) creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466).

  • Tenon Refractory Mortar Group (all 4) 2023

    Tenon® Refractory Mortar

    Tenon® Refractory Mortar is a specially-engineered blend of specific cements and aggregates giving the mortar unique heat-resistance and thermal characteristics for use in high-temperature applications such as inside fire pit rings, setting chimney clay flue liners, parging a smoke chimney chamber, and setting fire bricks. Passes ASTM C 199 for mortar temperature limits to 2,550°F for a minimum of 6 hours. 

  • TechPro® Stone Veneer Joint Grout

    TechPro® Stone Veneer Joint Grout is a mixture of dry cementitious materials and dried sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water only. "Step 3" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Available in 4 colors to compliment or contrast veneer units: Gray (BOM #120446); Brown (BOM #120449); Tan (BOM #120448), White (BOM #120447); and Charcoal (BOM #130110).

  • Tenon Surface Bonding Cement CR

    Tenon® Surface Bonding Cement CR

    Tenon® Surface Bonding Cement CR is a versatile fiber-reinforced, Portland cement-based product used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, repair deteriorated stucco, and in the construction of concrete block walls that are dry stacked (without mortar) above the first course. Special fibers control shrinkage, cracking, and sagging on vertical applications and provides additional overall strength when compared with conventional concrete. Available in Gray (BOM #113951) and White (BOM #120881).