Patches
-
Rapid Patch® Feather Edge Pro
Rapid Patch® Feather Edge Pro (BOM #129490) is a trowelable, rapid-setting, Portland cement-based, polymer-modified, patch and skim coating compound for use on multiple substrates. This specially formulated, non-sanded product results in an ultra-smooth finish and can be applied from feather edge to ½ in. (13 mm) and is ideal for use as an embossing leveler.
-
Akona® Crack-Resistant Surface Bonding Cement
Akona® Crack-Resistant Surface Bonding Cement is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete. Available in Gray (BOM #102614).
-
Tenon® Concrete Resurfacer
Tenon® Concrete Resurfacer (BOM #120728) is a fast-setting, high-performance polymer-modified, cement-based product used for resurfacing old concrete to make it look new again. Applications from feather edge to ½ in. (2-13 mm). Fast-drying, walkable on average in 2 hours.
-
Akona® Instant Patching Cement
Akona® Instant Patching Cement (BOM #102632) is a high-performance cement used for filling wide cracks and other concrete repair needs. It sets rock hard in just 90 minutes. Akona Instant Patching Cement self-bonds to all properly-prepared concrete surfaces and develops twice the strength of ordinary concrete.
-
Tenon® Feather Edge Pro
Tenon® Feather Edge Pro (BOM #120540) is a trowelable, rapid-setting, polymer-modified, self-drying, Portland cement-based patch and skim coating compound for multiple interior substrates. Specially formulated with superior workability for easy application, this non-sanded product results in an ultra-smooth finish and can be applied from feather-edge to ½ in. (13 mm) and is ideal for use as an embossing leveler. Fast-setting, with initial set in 15 minutes; can accept ceramic tile and stone applications, as well as moisture-sensitive floor coverings, in as little as 30 minutes or when completely dry.
-
Tenon® Feather Patch Pro
Tenon® Feather Patch Pro is a fast-setting, polymer-modified, self-drying, cement-based patch and skim coating compound for interior use under ceramic tile, hardwood flooring, carpet and a wide array of floor coverings. Ideal for deeper patching, this product can be applied from feather-edge to 2 in. (51 mm) thick. Formulated for exceptional bond strength and superior workability, can be applied to concrete with a relative humidity (RH) up to 90%. Rapid-setting, with initial set in 15 minutes; can accept ceramic tile and stone applications, as well as moisture-sensitive floor coverings, in as little as 30 minutes or when completely dry. Available in 10 lb. (4.5 kg) pails (BOM #120618), and 25 lb. (11.3 kg) pails (BOM #120541).
-
Akona® Pre-Mixed Concrete & Stucco Patch
Akona® Pre-Mixed Concrete & Stucco Patch is a water-based formula intended to patch minor cracks, holes, and surface defects in concrete or stucco. Product may also be used for residential repairs of masonry walls and re-applying small broken pieces of concrete or tuck pointing brick mortar joints. Pre-Mixed Concrete & Stucco Patch offers superior adhesion and may be used for vertical or horizontal patches. Available in 1 quart tub (BOM #103962) and 1 gallon pail (BOM #120713).
-
Sakrete® Flo-Coat Concrete Resurfacer
Sakrete® Flo-Coat Concrete Resurfacer (BOM #120034) is a polymer-modified sand and cement mix for resurfacing concrete from 1/8 inch to 1/4 inch depth. Can be applied in a flowable consistency using a squeegee or in a stiffer consistency using a trowel.
-
Akona® Vinyl Cement Patch
Akona® Vinyl Cement Patch is ideally suited for repairs to damaged concrete steps, sidewalks, driveways, patios, curbs, walls and floors. This product contains unique polymers that give it twice the strength and three times the adhesion of conventional concrete. Just add water and mix for an easy-to-use product which can be troweled to a feather edge on interior and exterior concrete applications. For resurfacing large areas, use Akona Polymer-Modified Concrete Resurfacer. Akona® Vinyl Cement Patch is available in 3 convenient sizes: 10 lb bag (BOM #102633), 25 lb bag (BOM #102634), and 40 lb bag (BOM #104452).
-
Akonakote® Pourable Concrete Patch
Akonakote® Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.
-
Tenon® Mighty Bond™
Tenon® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 1 gal. bottles (BOM #120525), 5 gal. pails (BOM #120526) and 55 gal. drums (BOM #130020).
-
Sakrete® Pourable Concrete Patch
Sakrete® Pourable Concrete Patch (BOM #120037) is a flowable, squeegee-grade, polymer-modified mix for patching and resurfacing concrete up to ½ inch depth.
-
Sakrete® Top ‘n Bond Concrete Patcher
Sakrete® Top 'n Bond Concrete Patcher (BOM #120031 = 10 lb. / #120032 = 50 lb.) is a polymer-modified sand-cement repair mortar for resurfacing, patching, and general concrete repairs from ½ inch to featheredge. Requires only the addition of water.
-
Tenon® Pourable Concrete Patch
Tenon® Pourable Concrete Patch (BOM #120672) is a Portland cement-based, flowable, squeegee-grade, polymer-modified patching and resurfacing mix for interior and exterior horizontal concrete substrates. Easy to use, it corrects defects up to ½ in. (13 mm) on concrete surfaces prior to applying new flooring materials or coatings. Depending on application, can also be used as a wearable surface for residential and light duty commercial applications. Meets ASTM C387 “Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete” for normal weight concrete.
-
Tenon® Vinyl Concrete Patch
Tenon® Vinyl Concrete Patch a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather-edge to 2 in. (51 mm) thick per lift. Typically supports foot traffic in 8-12 hours, wheeled traffic in 48 hours. Available in 10 lb. pail (BOM #127634) and 50 lb. bag (BOM #120681).