Concrete Sealers

Akona^® Concrete Cure & Seal

Akona Concrete Cure & Seal is a clear, non-yellowing, waterborne, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly placed and/or existing concrete, pavers, brick, stone, and other cementitious materials. Concrete Cure & Seal is formulated to cure, seal, protect, and dustproof. Designed for both exterior and interior applications. The white solution dries clear and provides a dust-free surface. Concrete Cure & Seal provides maximum hardness to the concrete as well as resistance to traffic abrasion when applied to freshly placed concrete. Construction debris is easier to remove. It is compatible with most tile and carpet adhesives. On existing driveways, sidewalks, garage floors it provides protection from water penetration, salts, grease, etc. Available in a 1 gallon bottle (BOM #121281).

Conproco^® Color Coat

Colorfast coating, durable finish for concrete and masonry. Economical paint for concrete, masonry, and stucco.

Where to use: Enhance appearance and protect vertical and overhead concrete block, stucco, brick, and synthetic stucco.

How to apply: Apply with roller, spray, or brush, resulting in a 100% acrylic waterproof coating.

Conproco^® Conpro^™ Start

Conpro™ Start treats crumbling mortar joints and strengthens punky concrete surfaces. It is a penetrating consolidant utilizing mineral silicate technology to densify deteriorating cementitious surfaces.

Where to use: Restore surface integrity and strengthen the substrate before application of coatings or repair materials.

How to apply: Spray, roller, or brush applied, water-based consolidant, used to stabilize and strengthen concrete, masonry, and stone.

Conproco^® Conpro^™ Stucco

Provides a durable, decorative cementitious finish for exterior wall systems.

Where to use: For a natural-appearing, decorative texture coating on concrete, masonry, and curtain wall construction.

How to apply: Trowel or spray applied traditional Portland cement stucco. Refer to Conproco Exterior Wall Systems for additional information.

Conproco^® ECB

ECB is a brush or spray applied, water-based, single-component anti-corrosion coating and long open time bonding primer that prevents rusting of rebar. Mechanically remove rust from rebar and apply.

Where to use: Protect reinforcing steel and metal embedded in concrete against corrosion.

How to apply: Spray or brush applied.

Conproco^® Elastideck

Elastideck is a two-component product that, when applied, forms a flexible cement membrane. Elastideck is available in 14 standard colors. To freshen the surface after years of service, simply apply Super Color Stain.

Where to use: Decorative coating for balconies, walkways, driveways, planters, and parapets.

How to apply: Roller or squeegee applied.

Conproco^® Gun Shot LPS

Gunshot LPS is spray applied with low-pressure spray equipment to vertical and overhead concrete substrates when repairing vertical and overhead concrete structures.

Where to use: High production vertical and overhead concrete repairs.

How to apply: Spray or trowel applied.

Conproco^® Lastic

Crack-bridging, breathable, waterproof coating for concrete and masonry. Durable, colorfast coating for concrete, masonry, and stucco.

Where to use: Protect vertical concrete, block, brick, stucco, and EIFS from water and contaminant entry. Will bridge minor cracking.

How to apply: Roller, spray, or brush applied, waterproof, elastomeric, crack bridging, anti-carbonation membrane.

Conproco^® M3P

Mineral silicate-based, highly permeable paint/stain, with a natural finish for concrete, masonry, and terracotta. Durable protection for historic structures.

Where to use: Long-term protection and enhanced aesthetics of concrete, masonry, and stone. Opaque and semi-transparent finishes are available.

How to apply: Brush or roller applied.

Conproco^® M3P Overcoat

Highly breathable mineral silicate/acrylic hybrid coating for recoating elastomeric and silicone-based paints. Natural appearance, durable coating to preserve new concrete structures.

Where to use: Over properly prepared silicone and elastomeric coatings, masonry paint, and new concrete.

How to apply: Brush or roller applied.

Conproco^® M3P-X

Protect historic structures with a transparent finish on concrete, masonry, and terracotta when combined with M3P.

Where to use: Clear penetrating mineral silicate diluent used for creating semi-transparent finishes with M3P.

How to apply: Brush or roller applied, combined with M3P.

Conproco^® Matrix TR

Matrix TR is formulated to provide long-term protection of natural stone and concrete when full-depth repairs are unnecessary or not practical.

Where to use: Thin, protective repairs to brownstone, sandstone, limestone, cast stone, terracotta, and concrete.

How to apply: Brush or trowel applied.

Conproco^® Shield MX

A clear, penetrating water repellent for concrete and masonry. Unaffected by microbiological activity.

Where to use: Vertical and horizontal concrete, concrete block, concrete pavers, natural stone, stucco, and brick.

How to apply: Spray, roller, or brush applied, penetrating aqueous silane/siloxane water repellent.

Conproco^® Super Color Stain

Colorfast, durable stain for concrete block, stucco, vertical, and horizontal concrete surfaces. Enhances natural appearance and adds protection from elements.

Where to use: Enhance appearance and protect concrete, CMU, stucco, brick, and as a washable finish for Elastideck.

How to apply: Apply with roller, spray, or brush, using water-based opaque acrylic stain.

Conproco^® Terracotta Finish

Repairing terracotta includes matching the sheen. Terracotta is found on many historic structures.

Where to use: Apply the glaze to terracotta or the fire skin to brick. Apply over Terra-Color to match the surrounding undamaged terracotta.

How to apply: Brush or roller applied.

Tenon^® 40% Silane Sealer

Tenon® 40% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and  rebar corrosion which moisture can cause. It is suitable for use to protect, and seal fully-cured fresh concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. 40% Silane Sealer is used for above-grade exterior applications that are not subject to hydrostatic pressure.  Available in 1 gal. bottle (BOM #129870), 5 gal. pail (BOM #129860) and 55 gal. drum (BOM #129597). 

Tenon^® 40% Silane Sealer WB

Tenon® 40% Silane Sealer WB is a VOC compliant, clear, non-yellowing, concrete sealer that penetrates deeply and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and spalling, freeze damage, and rebar corrosion due to moisture interaction. It is suitable for use to protect, and seal fully cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. Tenon® 40% Silane Sealer WB is designed for use above-grade exterior applications that are not subjected to hydrostatic pressure. Available in 1 gal. bottle (BOM #114417), 5 gal. pail (BOM #114427) and 55 gal. drum (BOM #114415). 

Tenon^® Cure & Harden

Tenon® Cure & Harden is a clear, water-based silicate-based curing, hardening, and dustproofing concrete sealer. Tenon® Cure & Harden penetrates into and reacts chemically within the capillaries of the concrete or masonry surfaces. It is suitable for use on freshly placed and finished concrete and in the renovation of aged concrete.

Tenon^® Cure & Seal ES

Tenon® Cure & Seal ES is a clear, non-yellowing, fast drying acrylic compound.  No Fillers, oils, waxes, or saponifiable resins are contained in the mixture.  It is used for curing and sealing of freshly-placed and /or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.  Cure & Seal ES forms a membrane film on new concrete to seal and retain hydrations water, providing maximum hardness of the substrate, resistance to abrasion, and resistance to damage caused by salt, oil, grease, mild acids, alkali, and stains from soot, smog, fumes, and gases.  Cure & Seal ES will also benefit existing concrete by penetrating into the slab, binding together the small dusting particles, while filling the voids to produce a non-porous, dust-free, brighter surface.   When used on terrazzo, brick, stone, and architectural concrete, it brings out the highlights, enriches, and enhances the natural colors found in the material.

Tenon^® Salt Barrier ES

Tenon® Salt Barrier ES (Exempt Solvent) is designed to protect & extend the life of concrete, masonry, pavers, retaining walls and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier ES provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surface. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the concrete to protect against moisture penetration, spalling, freeze-thaw damage, deicing salts, efflorescence, and chemical erosion, protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Salt Barrier ES is used for above-grade exterior applications that are not subject to hydrostatic pressure.

Tenon^® Ultimate Barrier

Tenon® Ultimate Barrier is a clear, non-yellowing, fast drying acrylic-silicone blended concrete sealer for curing, dustproofing, and weatherproofing of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Tenon® Ultimate Barrier is designed to be a single application for curing, sealing, and weatherproofing. Tenon® Ultimate Barrier forms a membrane film on new concrete to seal and retain hydration water, providing optimum curing of the substrate, resistance to abrasion, damage caused by salt, oil, grease, mild acids, alkali, and stains from soot, smog, fumes, and gases. Tenon® Ultimate Barrier reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion which moisture can cause. It is suitable for use to cure, protect, and seal fully-cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials.

Tenon^® Ultimate Barrier ES

Tenon® Ultimate Barrier ES is a VOC compliant, clear, non-yellowing, fast drying acrylic-silicone blended concrete sealer for curing, dustproofing, and weatherproofing of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.

Tenon Ultimate Barrier ES is designed to be a single application for curing, sealing, and weatherproofing. Tenon® Ultimate Barrier ES forms a membrane film on new concrete to seal and retain hydration water, providing optimum curing of the substrate, resistance to abrasion, damage caused by salt, oil, grease, mild acids, alkali, and stains from soot, smog, fumes, and gases.

Tenon Ultimate Barrier ES reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion which moisture can cause. It is suitable for use to cure, protect, and seal fully-cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials.

Tenon^® Burnished Block Sealer

Tenon® Burnished Block Sealer is used as a final sealer on masonry block walls including burnish block or ground face block, architectural block, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Burnished Block Sealer enhances the beauty, giving the surface a rich “wet-look” sheen. It forms a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Made with a blend of methacrylate polymers, this aromatic solvent-based coating does not yellow when exposed to the sun’s UV rays. Available in 1 gal. bottle (BOM #121100), 5 gal. pail (BOM #129530), and 55 gal. drum (BOM #121101).

Quikrete^® Re-Cap Concrete Resurfacer

Quikrete® Re-Cap™ Concrete Resurfacer (BOM #112421) is a special blend of portland cement, sand, polymer modifiers and other additives. Designed to provide a shrinkage compensated repair material for making thin repairs to sound concrete in need of surface renewal. Can be squeegee, trowel or brush applied.

Tenon^® Concrete & Masonry Sealer WB

Tenon® Concrete & Masonry Sealer WB is a water-based sealer that penetrates and reacts chemically within the capillaries of the concrete or masonry, bonding to the silica in the substrate to protect against moisture penetration, water-related staining, atmospheric chemicals, and deterioration. It is used to protect and seal clean, dry, coating-free, fully-cured concrete, brick masonry, concrete masonry units, stucco, stone terrazzo, architectural concrete, and some natural stones. For above-grade exterior applications that are not subject to hydrostatic pressure. Ready-to-use, this low VOC, silane/siloxane emulsion is especially suited for applications where VOC regulations for AIM coatings prevent the use of solvent-borne products. Available in 1 gallon bottles (BOM #120673) and 5 gallon pails (BOM #120674).

Tenon^® Concrete Surface Retarder

Tenon® Concrete Surface Retarder is a water-based, “Formula S’’ mixture that is applied to freshly placed concrete applications to chemically delay the setting of the mortar at the surface of the concrete. This allows the top layer of cement paste to be flushed away creating an exposed aggregate decorative finish without damaging the integrity of the concrete slab. A stream of water or scrubbing with a stiff brush is used to create the decorative texture. Surface Retarder can also be used on concrete to roughen or open the surface to improve the bonding for coatings or toppings. Available in 1 gallon bottles (BOM #121117) and 5 gallon pails (BOM #121118).

Tenon^® Cure & Seal WB 1315

Tenon® Cure & Seal WB 1315 is a film-forming compound that meets ASTM C1315 performance standards for water loss when applied properly to cure, seal, and harden freshly placed concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Cure & Seal WB 1315 will pass all VOC compliance laws and is formulated to cure, seal, protect, and dustproof concrete, as well as seal many types of porous tile and resilient floors. Designed for both exterior and interior applications, it is particularly recommended for indoor work in public buildings (hospitals, restaurants) and private residences where solvent-based systems are difficult to use. The white solution dries clear and provides a dust-free surface. This product provides maximum hardness to the concrete as well as resistance to traffic abrasion. Construction debris are easier to clean. Compatible with most tile and carpet adhesives.  Available in 1 gal. bottle (BOM #129910), 5 gal. pail (BOM #129920), and 55 gal. drum (BOM #129930).

Tenon^® Cure & Seal

Tenon® Cure & Seal is a non-yellowing, fast-drying acrylic compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete. Enhances colors, darkens the appearance of concrete, brick, stone, terrazzo, and exposed aggregate. Available in 1 gal. bottle (BOM #120839), 5 gal. pail (BOM #120838), or 55 gal. drum (BOM #120932).

Sakrete^® Cure ‘N Seal (WB)

Sakrete® Cure 'N Seal (WB) (BOM #120045) is a clear, non-yellowing, waterborne, acrylic polymer modified resin compound used for curing, sealing, and hardening freshly placed concrete. Also used to seal, protect, and dustproof existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.

Tenon^® Cure & Seal WB

Tenon® Cure & Seal WB is a clear, non-yellowing, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Waterborne mixture passes VOC compliance laws. Available in 1 gal. bottle (BOM #120823), 5 gal. pail (BOM #120822), and 55 gal. drum (BOM #120824).

Tenon^® Paver Guardian WB

Tenon® Paver Guardian WB is designed to protect & extend the life of installed pavers, retaining walls and other cementitious surfaces without affecting the finished look. Paver Guardian WB provides a natural finish that maintains the original look of pavers, concrete, architectural concrete, brick, natural stone, and other cementitious materials. This clear, water-bourne formula penetrates and reacts chemically within the capillaries of the surface to protect against deicing salts, moisture penetration, spalling, freeze-thaw damage,  efflorescence, and chemical erosion. Paver Guardian WB also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Paver Guardian WB is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottle (BOM #129780), 5 gal. pail (BOM #129790), or 55 gal. drum (BOM #129576).

Tenon^® Paver Seal

Tenon® Paver Seal is designed to protect & extend the life of installed pavers, while enhancing the color and adding a matte finish. Made with a blend of methacrylate polymers, this solvent -based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on concrete, architectural concrete, brick, natural tile, and other cementitious materials. Paver Seal will enhance the beauty of pavers, colored or stamped concrete, or exposed aggregate yet keep a matte finish. It forms a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Available in 1 gal. bottle (BOM #129730), 5 gal. pail (BOM #129720), or 55 gal. drum (BOM #129551).

Tenon^® Paver Seal Pro WB

Tenon® Paver Seal Pro WB is a penetrating, breathable, waterborne sealer designed to protect & extend the life of installed pavers, while enhancing the color with a natural, non-gloss finish. Made with a durable polysiloxane that does not yellow when exposed to the sun's UV rays, it penetrates deep in the capillaries of the paving stones for increased protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. Paver Seal Pro WB will enhance the beauty of pavers, stone veneer, and architectural concrete by making colors more vibrant while protecting surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants and making these surfaces easier to clean. Available in 1 gal. bottle (BOM #129770), 5 gal. pail (BOM #129760), or 55 gal. drum (BOM #129563).

Tenon^® Paver Seal & Shine

Tenon® Paver Seal & Shine is designed to protect & extend the life of installed pavers, while enhancing color and adding a gloss finish. Made with a blend of methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on concrete, architectural concrete, brick, natural stone, and other cementitious materials. Paver Seal & Shine will enhance the beauty of pavers, colored or stamped concrete, or exposed aggregate by giving it a rich “wet-look” gloss. It provides a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these  surfaces easier to clean. Available in 1 gal. bottle (BOM #129690), 5 gal. pail (BOM #129680), or 55 gal. drum (BOM #129539).

Tenon^® Paver Seal & Shine Pro WB

Tenon® Paver Seal & Shine Pro WB is a penetrating, breathable, waterborne sealer designed to protect & extend the life of installed pavers, while enhancing the color and adding a “wet-look” gloss. Made with a durable acrylic that does not yellow when exposed to the sun's UV rays, it penetrates deep in the capillaries of the paving stones for increased protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. Paver Seal & Shine Pro WB will enhance the beauty of pavers, colored or stamped concrete, or exposed aggregate by giving it a “wet-look” finish while protecting surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants and making these surfaces easier to clean. Available in 1 gal. bottle (BOM #129710), 5 gal. pail (BOM #129700), or 55 gal. drum (BOM #129545). 

Tenon^® Paver Seal Ultra Shine

Tenon® Paver Seal Ultra Shine is a high-solids, low-viscosity, sprayable sealing agent designed to protect & extend the life of installed pavers, while enhancing color and adding a high-gloss “wet look” finish. Made with a blend of 100% methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on architectural concrete, brick, natural stone, and other cementitious materials. Paver Seal Ultra Shine will enhance the beauty and vibrancy of colored or stamped concrete and exposed aggregate giving it a rich high-gloss finish. It forms a membrane to increase protection from  damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Available in 1 gal. bottle (BOM #129750), 5 gal. pail (BOM #129740), or 55 gal. drum (BOM #129556).

Tenon^® Salt Barrier

Tenon® Salt Barrier is designed to protect & extend the life of concrete, masonry, pavers, retaining walls and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surfaces. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the concrete. This product protects against moisture  penetration, spalling, freeze-thaw damage, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making those surfaces easier to clean. Salt Barrier is used for above-grade exterior applications that are not subject to hydrostatic pressure.

Tenon^® Salt Barrier WB

Tenon® Salt Barrier WB is designed to protect & extend the life of concrete, masonry, pavers, retaining walls and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier WB provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surfaces. This clear, water -based formula penetrates and reacts chemically within the capillaries of the surface to protect against deicing salts, moisture penetration, spalling, freeze-thaw damage, efflorescence, and chemical erosion. Salt Barrier WB also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Salt Barrier WB is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottle (BOM #129840), 5 gal. pail (BOM #129580), or 55 gal. drum (BOM #129587).

Tenon^® 100% Silane Sealer

Tenon® 100% Silane Sealer is a clear, solvent-based, concrete sealer that penetrates deep into, and reacts chemically, within the capillaries of the concrete or masonry in order to protect against moisture penetration and the spalling, freeze damage, and  rebar corrosion which moisture can cause. It is suitable for use to protect and seal fully-cured fresh concrete, cast in place, precast, and high strength concrete materials. 100% Silane Sealer is used for above-grade exterior applications that are not subject to hydrostatic pressure. It is excellent for treating high traffic areas or surfaces that receive high salt concentrations such as coastal piers.  Available in 1 gal. bottle (BOM #129890), 5 gal. pail (BOM #129900) and 55 gal. drum (BOM #129652). 

Tenon^® 20% Silane Sealer

Tenon® 20% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and  rebar corrosion which moisture can cause. It is suitable for use to protect, and seal fully-cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. Silane sealers are used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottle (BOM #129980), 5 gal. pail (BOM #129970) and 55 gal. drum (BOM #129644). 

Tenon^® Siloxane Final Seal

Tenon® Siloxane Final Seal is an aromatic, solvent-based concrete sealer/water-repellant used to protect cementitious surfaces against the damage caused by water penetration. Can be applied to surfaces where a cure and seal coating was previously applied. Available in 1 gal. bottle (BOM #120828), 5 gal. pail (BOM #120827), and 55 gal. drum (BOM #120829).

Tenon^® Siloxane Sealer

Tenon® Siloxane Sealer is a clear, solvent-based sealer for concrete and cementitious materials. It penetrates and reacts chemically within the capillaries to repel water and protect from the damaging effects of rain, water penetration, chemicals, salt, freeze-thaw cycles, and smog. Provides natural-looking, non-yellowing, invisible protection.  Available in 1 gal. bottle (BOM #120826), 5 gal. pail (BOM #120825), and 55 gal. drum (BOM #120829).

Tenon^® Super Clear Coat

Tenon® Super Clear Coat is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on burnish block, architectural concrete, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Enhances the colors of the surfaces with a rich "wet-look" sheen. Available in 1 gal. bottle (BOM #120831), 5 gal. pail (BOM #120830), and 55 gal. drum (BOM #120832).

Tenon^® Super Clear Coat Matte

Tenon® Super Clear Coat Matte is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic, solvent-based sealer does not yellow under the sun's UV rays. It enhances the beauty of colored or stamped concrete and exposed aggregate yet keeps a matte, low gloss finish. Available in 1 gal. bottle (BOM #120834), and 5 gal. pail (BOM #120833).

Tenon^® Super Diamond Glaze

Tenon® Super Diamond Glaze is a higher viscosity version of Super Clear Coat used for curing and sealing exposed aggregate and sealing colored concrete. Enhances the beauty and depth of the surface, giving it a rich "wet-look" high gloss while protecting from the damages caused by moisture penetration. Available in 1 gal. bottle (BOM #120836), 5 gal. pail (BOM #120835), and 55 gal. drum (BOM #120837).