Chemicals & Additives


Akona® Concrete & Masonry Dissolver

Akona® Concrete & Masonry Dissolver is an environmentally-friendly liquid alternative to aggressive acid concrete removers. Concrete & Masonry Dissolver can be used to safely remove cured concrete, mortar, grout, and stucco buildup from tools, concrete forms, job mixers, hardware, shoring, and more. This product deconstructs the bond between the Portland cement component, turning it into […]

Akona® Concrete/Masonry Restoration Cleaner

Akona® Concrete/Masonry Restoration Cleaner (BOM #102652) is a mild, acidic product that dissolves and removes efflorescence (white mineral deposits) and rust stains from concrete surfaces, masonry units, pavers, brick, etc. This product is recommended to be used before applying a sealer to the surface of concrete or masonry. This enables the sealer to penetrate and […]

Akona® Concrete/Masonry Set Accelerator

Akona® Concrete/Masonry Set Accelerator (BOM #103963) is an ASTM C494, Type C, non-chloride, non-corrosive, liquid that improves workability and initial strength while it reduces the hydration time of cement. The product is recommended for use during cooler weather to accelerate set time and reduce the risk of frozen mortar and concrete mixes. It is also […]

Akona® Liquid Air Entraining Admixture

Akona® Liquid Air Entraining Admixture (BOM #103941) is a ready-to-use, aqueous solution made of organic materials. Akona Liquid Air Entraining Admixture entrains a small and stable amount of air into the desired mix. These small, stable air voids enhance the mixture and improve workability. Its chemical composition and physical properties make it ideal for many […]

ProSpec® Air Entrainment

ProSpec® Air Entrainment (BOM #120377) is a ready-to-use, aqueous solution made of organic materials. ProSpec Air Entrainment entrains a small and stable amount of air into the desired mix. These small, stable air voids enhance the mixture and improve workability. Its chemical composition and physical properties make it ideal for many construction applications. It is […]

ProSpec® Burnished Block Sealer WB Matte

ProSpec®Burnished Block Sealer WB Matte is used as a final sealer on masonry block walls including burnish block or groundface block, architectural block, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. It enhances the beauty, giving the surface a rich “wet-look” without the gloss. It forms a breathable membrane to increase protection from […]

ProSpec® Concrete & Masonry Dissolver

ProSpec® Concrete & Masonry Dissolver is an environmentally-friendly liquid alternative to aggressive acid concrete removers. Use to safely dissolve and remove cured concrete, mortar, grout, and stucco build-up from tools, concrete forms, job mixers, hardware, shoring, and more. Available in 28 oz. bottle (BOM#121006), 1 gal. bottle (BOM #120911), and 5 gal. pail (BOM #120912). […]

ProSpec® Concrete & Masonry Sealer WB

ProSpec® Concrete & Masonry Sealer WB is a water-based sealer that penetrates and reacts chemically within the capillaries of the concrete or masonry, bonding to the silica in the substrate to protect against moisture penetration, water-related staining, atmospheric chemicals, and deterioration. It is used to protect and seal clean, dry, coating-free, fully-cured concrete, brick masonry, […]

ProSpec® Concrete & Mortar Dissolver RM

Prospec Concrete & Mortar Dissolver RM is an environmentally-friendly liquid alternative to aggressive acid based concrete removers. Concrete & Mortar Dissolver RM is specifically designed for use in the ready-mix industry to clean equipment while the concrete and mortar are still in their plastic state. This product will retard the set time and prevent the […]

ProSpec® Cure & Harden

ProSpec® Cure & Harden is a clear, water-based silicate-based curing, hardening, and dustproofing concrete sealer. ProSpec® Cure & Harden penetrates into and reacts chemically within the capillaries of the concrete or masonry surfaces. It is suitable for use on freshly placed and finished concrete and in the renovation of aged concrete. BOM # UNIT SIZE […]

ProSpec® Cure & Seal

ProSpec® Cure & Seal is a non-yellowing, fast-drying acrylic compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete. Enhances colors, darkens the appearance of concrete, brick, stone, terrazzo, and exposed aggregate. Available in 1 gal. bottle (BOM #120839), 5 gal. pail (BOM #120838), or 55 gal. drum (BOM #120932). BOM UNIT SIZE […]

ProSpec® Cure & Seal WB

ProSpec® Cure & Seal WB is a clear, non-yellowing, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Waterborne mixture passes VOC compliance laws. Available in 1 gal. bottle (BOM #120823), 5 gal. pail (BOM #120822), and 55 gal. […]

ProSpec® Fast-Set Liquid Activator

ProSpec® Fast-Set Liquid Activator is formulated specifically to be used in conjunction with ProSpec® Air-Entrained Concrete Patching Mix AE in order to establish a quicker set and develop strength rapidly. When used with the patching mix, Fast-Set Liquid Activator reduces the closure time of high-traffic areas from 24 hours to 4-5 hours under normal conditions. […]

ProSpec® Liquid Set Retarder

ProSpec® Fast-Set Liquid Set Retarder is a ready-to-use liquid admixture that slows the rate of reaction for of rapid setting concrete repair products, including: ProSpec® Commercial DOT Repair ProSpec® Premium Patch 100 ProSpec® Premium Patch 200 ProSpec® RapidPatch Vertical Repair ProSpec® Rapid Strength Concrete Mix SE ProSpec® BlendCrete RapidPatch® Multi Purpose Repair RapidPatch® Concrete Repair Mortar It is intended for use with these products in […]

ProSpec® Mighty Bond

ProSpec® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 1 gal. bottles […]

ProSpec® Moisture Barrier

ProSpec® Moisture Barrier (BOM #127610) is an advanced, latex, polymer-based technology used as a water-resistant membrane applied to all wood or moisture-sensitive backup walls prior to application of ProSpec Polymer-Modified Stone Veneer Base Coat. Ready to use (no mixing required), with exceptional flexibility and elongation, solvent free and VOC compliant, ProSpec Moisture Barrier is part of the ProSpec […]

ProSpec® Paver Guardian

ProSpec® Paver Guardian is designed to protect & extend the life of installed pavers without changing the finished look. Paver Guardian provides a natural finish that maintains  the original look of pavers, concrete, architectural concrete, brick, natural stone, and other cementitious materials. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the […]

ProSpec® Paver Guardian WB

ProSpec® Paver Guardian WB is designed to protect & extend the life of installed pavers, retaining walls and other cementitious surfaces without affecting the finished look. Paver Guardian WB provides a natural finish that maintains the original look of pavers, concrete, architectural concrete, brick, natural stone, and other cementitious materials. This clear, water-bourne formula penetrates […]

ProSpec® Paver Seal

ProSpec® Paver Seal is designed to protect & extend the life of installed pavers, while enhancing the color and adding a matte finish. Made with a blend of methacrylate polymers, this solvent -based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on concrete, […]

ProSpec® Paver Seal & Shine

ProSpec® Paver Seal & Shine is designed to protect & extend the life of installed pavers, while enhancing color and adding a gloss finish. Made with a blend of methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on concrete, […]

ProSpec® Paver Seal & Shine Pro WB

ProSpec® Paver Seal & Shine Pro WB is a penetrating,  breathable, water-bourne sealer designed to protect & extend the life of installed pavers, while enhancing the color and adding a “wet-look” gloss. Made with a durable polysiloxane that does not yellow when exposed to the sun’s UV rays, it penetrates deep in the capillaries of […]

ProSpec® Paver Seal Pro WB

ProSpec® Paver Seal Pro WB is a penetrating, breathable, water-bourne sealer designed to protect & extend the life of installed pavers, while enhancing the color with a natural, non-gloss finish. Made with a durable polysiloxane that does not yellow when exposed to the sun’s UV rays, it penetrates deep in the capillaries of the paving […]

ProSpec® Paver Seal Ultra Shine

ProSpec® Paver Seal Ultra Shine is a high-solids, low-viscosity, sprayable sealing agent designed to protect & extend the life of installed pavers, while enhancing color and adding a high-gloss “wet look” finish. Made with a blend of 100% methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can […]

ProSpec® Restoration Cleaner

ProSpec® Restoration Cleaner is a mild, acidic product that dissolves and removes efflorescence and rust stains from concrete and masonry surfaces. Restoration Cleaner is recommended to be used before applying a sealer to the surface of finished concrete or masonry applications, enabling the sealer to penetrate and seal more effectively. Restoration Cleaner may be used […]

ProSpec® Salt Barrier

ProSpec® Salt Barrier is designed to protect & extend the life of concrete, masonry, pavers, retaining walls and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, […]

ProSpec® Salt Barrier WB

ProSpec® Salt Barrier WB is designed to protect & extend the life of concrete, masonry, pavers, retaining walls and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier WB provides a natural finish that maintains the original appearance of driveways, patios, garage floors, […]

ProSpec® Set Accelerator

ProSpec® Set Accelerator (BOM #120376) is an ASTM C494, Type C, non-chloride, non-corrosive, liquid that improves workability and initial strength while it reduces the hydration time of cement.  The product is recommended for use during cooler weather to accelerate set time and reduce the risk of frozen mortar and concrete mixes. It is also recommended […]

ProSpec® Siloxane Final Seal

ProSpec® Siloxane Final Seal is an aromatic, solvent-based concrete sealer/water-repellant used to protect cementitious surfaces against the damage caused by water penetration. Can be applied to surfaces where a cure and seal coating was previously applied. Available in 1 gal. bottle (BOM #120828), 5 gal. pail (BOM #120827), and 55 gal. drum (BOM #120829). BOM […]

ProSpec® Siloxane Sealer

ProSpec® Siloxane Sealer is a clear, solvent-based sealer for concrete and cementitious materials. It penetrates and reacts chemically within the capillaries to repel water and protect from the damaging effects of rain, water penetration, chemicals, salt, freeze-thaw cycles, and smog. Provides natural-looking, non-yellowing, invisible protection.  Available in 1 gal. bottle (BOM #120826), 5 gal. pail […]

ProSpec® Super Clear Coat

ProSpec® Super Clear Coat is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on burnish block, architectural concrete, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Enhances […]

ProSpec® Super Clear Coat Matte

ProSpec® Super Clear Coat Matte is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic, solvent-based sealer does not yellow under the sun’s UV rays. It enhances the beauty of colored or stamped concrete and exposed aggregate yet keeps a matte, low gloss finish. Available in 1 gal. bottle (BOM #120834), […]

ProSpec® Super Diamond Glaze

ProSpec® Super Diamond Glaze is a higher viscosity version of Super Clear Coat used for curing and sealing exposed aggregate and sealing colored concrete. Enhances the beauty and depth of the surface, giving it a rich “wet-look” high gloss while protecting from the damages caused by moisture penetration. Available in 1 gal. bottle (BOM #120836), […]

ProSpec® Waterproofing & Crack Isolation Membrane

ProSpec® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675), 3.5 gal. pail (BOM #127630), and 5 gal. (BOM #120676). BOM UNIT SIZE UNIT […]

Quikrete® Polyurethane Construction Adhesive

Quikrete® Polyurethane Construction Adhesive (BOM #102353) is a high-performance, construction-grade adhesive designed for permanently bonding concrete, brick, marble, stone, wood, glass, aluminum, steel, PVC and tile. Ideal for bonding retaining wall block and caps, repairing broken concrete, or adhering signage and other items to concrete. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK […]

Quikrete® Polyurethane Non-Sag Sealant

Quikrete® Polyurethane Non-Sag Sealant (BOM #102351) is a high-performance, construction-grade polyurethane sealant designed for vertical and overhead surfaces. The non-sag formula provides superior adhesion and flexibility and is ideal for filling and sealing cracks and expansion joints in concrete, stucco, or masonry or for sealing around window and door openings. Meets ASTM C 920, Type […]

Quikrete® Polyurethane Self-Leveling Sealant

Quikrete® Polyurethane Self-Leveling Sealant (BOM #102352) is a high-performance, construction-grade, polyurethane sealant used for sealing cracks and joints in horizontal concrete surfaces. This self-leveling formula provides superior adhesion, flexibility and durability and is ideal for sealing expansion joints and crack in concrete floors, driveways, patios, steps, basements, and pool decks. Meets ASTM C 920 Type […]

Sakrete® Concrete & Asphalt Cleaner

Sakrete® Concrete & Asphalt Cleaner (BOM #120042) is a mild, acidic liquid used to clean concrete, masonry, and asphalt surfaces. Use to clean existing surfaces prior to making repairs. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 120042 1 qt. bottle TBD TBD TBD Case **Product production varies by plant. Please contact […]

Sakrete® Concrete Bonder & Fortifier

Sakrete® Concrete Bonder & Fortifier (BOM #120036) is a high-solids acrylic liquid bonding agent, used as a bonding admix or bonding agent enhance strength, durability, adhesion, abrasion resistance, and freeze-thaw resistance of concrete. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 120036 1 gal. bottle 10 lb. 4 40 lb. Case **Product […]

Sakrete® Concrete Glue

Sakrete® Concrete Glue (BOM #120033) is an acrylic cement modifier used as a surface primer or as a bonding additive to enhance strength, adhesion, abrasion resistance, and freeze-thaw resistance of concrete. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 120033 1 gal. bottle 9 lb. 4 36 lb. Case **Product production varies […]

SAKRETE® Concrete Mortar Dissolver

Sakrete® Concrete Mortar Dissolver is a safe, environmentally-friendly liquid alternative to aggressive acid concrete removers. Use to remove cured cement, concrete, mortar or stucco from most surfaces. Available in 28 oz. bottle (BOM#120043), 1 gal. bottle (BOM#121120), and 5 gal. pail (BOM#121130). BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 120043 28 […]

Sakrete® Cure ‘N Seal (WB)

Sakrete® Cure ‘N Seal (WB) (BOM #120045) is a clear, non-yellowing, waterborne, acrylic polymer modified resin compound used for curing, sealing, and hardening freshly placed concrete. Also used to seal, protect, and dustproof existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE […]

Sakrete® Form Release Oil

Sakrete® Form Release Oil (BOM #120044) is a release agent for use with concrete forms. Allows forms to be removed earlier and easier, yet has only a light residue. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 120044 5 gal. pail 37 lb. 24 888 lb. Pallet **Product production varies by plant. […]