Underlayments


Akonakote® Pourable Concrete Patch

Akonakote™ Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch ...SEE MORE


Akona® Polymer-Modified Concrete Resurfacer

Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength ...SEE MORE


Akona® Self-Leveling Floor Underlayment Cement

Akona® Self-Leveling Floor Underlayment Cement (BOM #104623) is a free-flowing mortar for use where a level surface is necessary prior to installing floor coverings. This ground-breaking formula has a dry, integral primer mixed so you no longer need to spend the additional money, time, and labor on adding an ...SEE MORE


ProSpec® Level-Flo® Underlayment 100

ProSpec® Level-Flo® Underlayment 100 (BOM #120534) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied from ⅛"-1½" (3-38 mm) neat and up to 5" (127 mm) extended.. Accepts ...SEE MORE


ProSpec® Level-Flo® Underlayment 200

ProSpec® Level-Flo® Underlayment 200 (BOM #120535) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. Can be applied from ⅛"-2" (3-51mm) neat, and up to ...SEE MORE


ProSpec® Level-Flo® Underlayment 300

ProSpec® Level-Flo® Underlayment 300 (BOM #120536) is a high-performance, high-strength, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. It’s designed for maximum flow and seamless ...SEE MORE


ProSpec® Level-Flo® Underlayment 50

ProSpec® Level-Flo® Underlayment 50 (BOM #120585) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied as thick as 1" down to ⅛" (25-3 mm). Accepts non-moisture sensitive tile and ...SEE MORE


ProSpec® Mighty Bond™

ProSpec® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance ...SEE MORE


ProSpec® Tile Crete® Floor Mud

ProSpec® Tile Crete® Floor Mud is a blend of cementitious materials and oven dried sand developed to produce a water resistant and highly bondable substrate. Gray color is available in fine sand mix (BOM #105136), coarse sand mix (BOM #105154), and 50/50 mix (BOM #105141) Tile ...SEE MORE


Sakrete® Fast Setting Self-Leveling Resurfacer

Sakrete® Fast Setting Self-Leveling Resurfacer (BOM #120423) is a rapid setting cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for residential and light foot traffic industrial floors where a hard, flat, and smooth surface is desired. Applications from 1/8" to 1" and can be ...SEE MORE


Sakrete® Pourable Concrete Patch

Sakrete® Pourable Concrete Patch (BOM #120037) is a flowable, squeegee-grade, polymer-modified mix for patching and resurfacing concrete up to ½ inch depth.


Sakrete® Self-Leveling Underlayment

Sakrete® Self-Leveling Underlayment (BOM #120035) is a polymer-modified Portland cement based self-leveling underlayment for interior applications up to 1 inch in a single pour. For use over properly prepared concrete and plywood floors. Can be used under ceramic tile, stone, carpeting, VCT, wood flooring and ...SEE MORE


 

 

SHARE