ProSpec®


Prospec® 100% Silane Sealer

ProSpec® 100% Silane Sealer is a clear, solvent-based, concrete sealer that penetrates deep into, and reacts chemically, within the capillaries of the concrete or masonry in order to protect against moisture penetration and the spalling, freeze damage, and  rebar corrosion which moisture can cause. It is suitable for use to protect and seal fully-cured fresh […]

Prospec® 20% Silane Sealer

ProSpec® 20% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and  rebar corrosion which moisture can cause. It is suitable for use to protect, and seal fully-cured, new concrete, existing […]

Prospec® 40% Silane Sealer

ProSpec® 40% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and  rebar corrosion which moisture can cause. It is suitable for use to protect, and seal fully-cured fresh concrete, existing […]

ProSpec® Air Entrainment

ProSpec® Air Entrainment (BOM #120377) is a ready-to-use, aqueous solution made of organic materials. ProSpec Air Entrainment entrains a small and stable amount of air into the desired mix. These small, stable air voids enhance the mixture and improve workability. Its chemical composition and physical properties make it ideal for many construction applications. It is […]

ProSpec® Air-Entrained Concrete Patching Mix AE

ProSpec® Air-Entrained Concrete Patching Mix AE (3U58M) (BOM #126199) is an ideal for repairing concrete pavement, bridge decks, industrial floors, concrete parking lots, and garage decks. This pre-blended mixture of cement, aggregate, and special additives will produce a high strength concrete repair material that is extremely durable and works well in harsh environments. Additionally, when […]

ProSpec® BlendCrete

ProSpec® Blendcrete™ is a fast-setting, one component, polymer-modified, calcium aluminate cement-based concrete and masonry patching compound designed for vertical and overhead repair applications. Available in #0 Gray (BOM #128210), #2 Gray (BOM #128220), #3 Gray (BOM #128230), and White (BOM #128200). BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 128210 50 lb. […]

ProSpec® Burnished Block Sealer

ProSpec®  Burnished Block Sealer is used as a final sealer on masonry block walls including burnish block or groundface block, architectural block, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Burnished Block Sealer enhances the beauty, giving the surface a rich “wet-look” sheen. It forms a membrane to increase protection from damaging freeze-thaw […]

ProSpec® Burnished Block Sealer WB

ProSpec® Burnished Block Sealer WB is used as a final sealer on masonry block walls including burnish block or groundface block, architectural block, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Burnished Block Sealer WB enhances the beauty, giving the surface a rich “wet-look” sheen. It forms a breathable membrane to increase protection from […]

ProSpec® Burnished Block Sealer WB Matte

ProSpec®Burnished Block Sealer WB Matte is used as a final sealer on masonry block walls including burnish block or groundface block, architectural block, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. It enhances the beauty, giving the surface a rich “wet-look” without the gloss. It forms a breathable membrane to increase protection from […]

ProSpec® Concrete & Masonry Dissolver

ProSpec® Concrete & Masonry Dissolver is an environmentally-friendly liquid alternative to aggressive acid concrete removers. Use to safely dissolve and remove cured concrete, mortar, grout, and stucco build-up from tools, concrete forms, job mixers, hardware, shoring, and more. Available in 28 oz. bottle (BOM#121006), 1 gal. bottle (BOM #120911), and 5 gal. pail (BOM #120912). […]

ProSpec® Concrete & Masonry Sealer WB

ProSpec® Concrete & Masonry Sealer WB is a water-based sealer that penetrates and reacts chemically within the capillaries of the concrete or masonry, bonding to the silica in the substrate to protect against moisture penetration, water-related staining, atmospheric chemicals, and deterioration. It is used to protect and seal clean, dry, coating-free, fully-cured concrete, brick masonry, […]

ProSpec® Concrete & Mortar Dissolver RM

Prospec Concrete & Mortar Dissolver RM is an environmentally-friendly liquid alternative to aggressive acid based concrete removers. Concrete & Mortar Dissolver RM is specifically designed for use in the ready-mix industry to clean equipment while the concrete and mortar are still in their plastic state. This product will retard the set time and prevent the […]

ProSpec® Concrete Patching Mix

ProSpec® Concrete Patching Mix (BOM #126198) is a dry mixed combination of Portland Cement and aggregates that is proportioned and manufactured according to MnDOT specification 3105 for grade 3U18. When mixed according to specifications with water and admixtures, it is an ideal mixture for repairing concrete pavement, industrial floors, and structural concrete. BOM UNIT SIZE UNIT […]

ProSpec® Concrete Resurfacer

ProSpec® Concrete Resurfacer (BOM #120728) is a fast-setting, high-performance polymer-modified, cement-based product used for resurfacing old concrete to make it look new again. Applications from feather edge to ½ in. (2-13 mm). Fast-drying, walkable on average in 2 hours. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 120728 50 lb. bag 50 […]

ProSpec® Concrete Surface Retarder

ProSpec® Concrete Surface Retarder is a water-based, “Formula S’’ mixture that is applied to freshly placed concrete applications to chemically delay the setting of the mortar at the surface of the concrete. This allows the top layer of cement paste to be flushed away creating an exposed aggregate decorative finish without damaging the integrity of the […]

ProSpec® Construction Grout

ProSpec® Construction Grout (BOM #120720) is a non-shrink, non-metallic, Portland cement based mixture of hydraulic cement, aggregate, and additives for general purpose structural grouting. Meets or exceeds ASTM C-1107. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 120720 50 lb. bag 50 lb. 56 2800 lb. Pallet **Product production varies by plant. Please […]

ProSpec® Cure & Seal

ProSpec® Cure & Seal is a non-yellowing, fast-drying acrylic compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete. Enhances colors, darkens the appearance of concrete, brick, stone, terrazzo, and exposed aggregate. Available in 1 gal. bottle (BOM #120839), 5 gal. pail (BOM #120838), or 55 gal. drum (BOM #120932). BOM UNIT SIZE […]

ProSpec® Cure & Harden

ProSpec® Cure & Harden is a clear, water-based silicate-based curing, hardening, and dustproofing concrete sealer. ProSpec® Cure & Harden penetrates into and reacts chemically within the capillaries of the concrete or masonry surfaces. It is suitable for use on freshly placed and finished concrete and in the renovation of aged concrete. BOM # UNIT SIZE […]

ProSpec® Cure & Seal WB

ProSpec® Cure & Seal WB is a clear, non-yellowing, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Waterborne mixture passes VOC compliance laws. Available in 1 gal. bottle (BOM #120823), 5 gal. pail (BOM #120822), and 55 gal. […]

Prospec® Cure & Seal WB 1315

ProSpec® Cure & Seal WB 1315 is a film-forming compound that meets ASTM C1315 performance standards for water loss when applied properly to cure, seal, and harden freshly placed concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Cure & Seal WB 1315 will pass all VOC compliance laws and is formulated to cure, […]

ProSpec® Fast-Set Liquid Activator

ProSpec® Fast-Set Liquid Activator is formulated specifically to be used in conjunction with ProSpec® Air-Entrained Concrete Patching Mix AE in order to establish a quicker set and develop strength rapidly. When used with the patching mix, Fast-Set Liquid Activator reduces the closure time of high-traffic areas from 24 hours to 4-5 hours under normal conditions. […]

ProSpec® Feather Edge Pro

ProSpec® Feather Edge Pro (BOM #120540) is a trowelable, rapid-setting, polymer-modified, self-drying, Portland cement-based patch and skim coating compound for multiple interior substrates. Specially formulated with superior workability for easy application, this non-sanded product results in an ultra-smooth finish and can be applied from feather-edge to ½ in. (13 mm) and is ideal for use […]

ProSpec® Feather Patch Pro

ProSpec® Feather Patch Pro is a fast-setting, polymer-modified, self-drying, Portland cement-based patch and skim coating compound for interior use under ceramic tile, hardwood flooring, carpet and a wide array of floor coverings. Ideal for deeper patching, this product can be applied from feather-edge to 2 in. (51 mm) thick. Formulated for exceptional bond strength and […]

ProSpec® Heavy-Duty Stone Veneer Mortar

ProSpec® Heavy-Duty Stone Veneer Mortar (BOM #120444) is a high-yield, lightweight, high-performance, polymer-modified, fiber-reinforced, Portland-cement based mortar for adhered installation of masonry veneer stone and natural stone. 25% lighter than traditional mortars with excellent non-sag and non-slump handling characteristics. Special admixtures help create both a mechanical and chemical bond to the substrate, significantly outperforming standard mortars. […]

Prospec® High Strength Precision Grout

ProSpec® High Strength Precision Grout (BOM #120707) is a ready-to-use, high-strength, flowable precision grout mix with excellent working time and early strength ensuring quick job startups and reducing cost. This specially-formulated mix can be pumped into areas inaccessible by conventional grouting methods. High Strength Precision Grout is a non-shrink, non-metallic, non-staining, non-porous, high-density, pumpable formula designed […]

ProSpec® Instant Anchoring Cement

ProSpec® Instant Anchoring Cement is a quick-setting, anchoring cement compound used for setting poles, railings, bolts, and fixtures in concrete or masonry. Suitable for interior or exterior use. Expands as it hardens to set securely and lock in place for strong support. Any metals that will corrode when exposed to wet cement, such as aluminum, […]

ProSpec® Instant Hydraulic Cement

ProSpec® Instant Hydraulic Cement is a quick-setting hydraulic cement compound used primarily as a water stop or hole filler. It expands when set and locks into place to block flowing water in 3 to 5 minutes. For use only on concrete and masonry materials. Best for repairing leaks in cracks between blocks or on one surface, […]

ProSpec® Level-Flo® Plastic Lath

ProSpec® Level-Flo® Plastic Lath (BOM #104289) is a lightweight synthetic lath designed to mechanically attach and reinforce ProSpec® Level-Flo® Self-Leveling Floor Underlayments, and Tile Crete mortar beds over properly constructed wood subfloors. It can also be used as a screed bed leveling system and a one-step system for stone or tile when used with a […]

ProSpec® Level-Flo® Primer

ProSpec® Level-Flo® Primer is a high-quality, liquid-polymer latex for interior use with ProSpec Level-Flo self-leveling and concrete repair products. Applied to porous surfaces, this substrate primer reduces water absorption to ensure a flowable mix and promotes bonding. ProSpec Level-Flo Primer or Primer Pro are required to be applied to all substrates before placing ProSpec Level-Flo Underlayments or […]

ProSpec® Level-Flo® Primer Pro

ProSpec® Level-Flo™ Primer Pro (1 gal. BOM #129436, 5 gal. BOM #129438) is a high quality, acrylic latex based primer used with ProSpec® Level-Flo™ self-leveling products. Level-Flo™ Primer Pro is applied to porous and nonporous surfaces as a substrate primer to promote bonding. This primer can also be used with other cement-based ProSpec® concrete repair, surface […]

ProSpec® Level-Flo® Underlayment 100

ProSpec® Level-Flo® Underlayment 100 (BOM #120534) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied from ⅛”-1½” (3-38 mm) neat and up to 5″ (127 mm) extended.. Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings […]

ProSpec® Level-Flo® Underlayment 200

ProSpec® Level-Flo® Underlayment 200 (BOM #120535) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. Can be applied from ⅛”-2″ (3-51mm) neat, and up to 5″ (127 mm) extended. Fast-setting, accepts non-moisture sensitive tile and stone in as little as 4 hours, and […]

ProSpec® Level-Flo® Underlayment 300

ProSpec® Level-Flo® Underlayment 300 (BOM #120536) is a high-performance, high-strength, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. It’s designed for maximum flow and seamless merging with every pour and is ideal for fast track applications. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT […]

ProSpec® Level-Flo® Underlayment 50

ProSpec® Level-Flo® Underlayment 50 (BOM #120585) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied as thick as 1″ down to ⅛” (25-3 mm). Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings in 3 days. […]

ProSpec® Liquid Set Retarder

ProSpec® Fast-Set Liquid Set Retarder is a ready-to-use liquid admixture that slows the rate of reaction for of rapid setting concrete repair products, including: ProSpec® Commercial DOT Repair ProSpec® Premium Patch 100 ProSpec® Premium Patch 200 ProSpec® RapidPatch Vertical Repair ProSpec® Rapid Strength Concrete Mix SE ProSpec® BlendCrete RapidPatch® Multi Purpose Repair RapidPatch® Concrete Repair Mortar It is intended for use with these products in […]

ProSpec® Masonry Veneer Joint Grout

ProSpec® Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and dried sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. ProSpec Pro Veneer Technology (PVT) creates a high-performance […]

ProSpec® Masonry Veneer Mortar HB

ProSpec® Masonry Veneer Mortar HB (High Bond) (BOM #120462) is a high-performance, non-sag, fiber-reinforced, polymer-modified bonding mortar for installing real or manufactured masonry veneer units. Our Pro Veneer Technology (PVT) is a blend of cementitious materials, oven-dried sand, and special performance admixtures to create a professional strength mortar. This high-yield mortar allows for the same coverage […]

ProSpec® Masonry Veneer Mortar PM

ProSpec® Masonry Veneer Mortar PM (Polymer-Modified) (BOM #120461) is a high-performance, multi-purpose, polymer-modified mortar, used for both traditional thick bed scratch and base coats and as the bonding mortar for installing real or manufactured masonry veneer units. A blend of cementitious materials, oven-dried sand, and special performance admixtures, our Pro Veneer Technology (PVT) creates both a […]

ProSpec® Metro Mix 240

ProSpec® Metro Mix 240 (BOM #128260) is a high performance concrete mix engineered to meet commercial/industrial ready mix specifications. Super plasticized for higher slump and compressive strengths with corrosion inhibitors. Ideal for projects requiring small structural concrete applications or when ready mix truck access is restricted. Use for structural applications and full depth repairs of […]

ProSpec® Metro Mix 240 AE

ProSpec® Metro Mix 240 AE (BOM #128270) is the air-entrained version of our high performance concrete mix engineered to meet commercial/industrial ready mix specifications. Super plasticized for higher slump and compressive strengths with corrosion inhibitors. Ideal for projects requiring small structural concrete applications or when ready mix truck access is restricted. Use for structural applications […]

ProSpec® Mighty Bond

ProSpec® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 1 gal. bottles […]

ProSpec® Moisture Barrier

ProSpec® Moisture Barrier (BOM #127610) is an advanced, latex, polymer-based technology used as a water-resistant membrane applied to all wood or moisture-sensitive backup walls prior to application of ProSpec Polymer-Modified Stone Veneer Base Coat. Ready to use (no mixing required), with exceptional flexibility and elongation, solvent free and VOC compliant, ProSpec Moisture Barrier is part of the ProSpec […]

ProSpec® Partial Depth Concrete Patch

ProSpec® Partial Depth Concrete Patch is is ideal for placing overlays less than 2” deep (5 cm). This pre-blended cement and oven dried sand mixture will produce a high-strength concrete repair material that is extremely durable in partial depth applications such as concrete pavements, bridge decks, industrial floors, concrete parking lots and garage decks. It […]

ProSpec® Paver Guardian

ProSpec® Paver Guardian is designed to protect & extend the life of installed pavers without changing the finished look. Paver Guardian provides a natural finish that maintains  the original look of pavers, concrete, architectural concrete, brick, natural stone, and other cementitious materials. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the […]

ProSpec® Paver Guardian WB

ProSpec® Paver Guardian WB is designed to protect & extend the life of installed pavers, retaining walls and other cementitious surfaces without affecting the finished look. Paver Guardian WB provides a natural finish that maintains the original look of pavers, concrete, architectural concrete, brick, natural stone, and other cementitious materials. This clear, water-bourne formula penetrates […]

ProSpec® Paver Seal

ProSpec® Paver Seal is designed to protect & extend the life of installed pavers, while enhancing the color and adding a matte finish. Made with a blend of methacrylate polymers, this solvent -based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on concrete, […]

ProSpec® Paver Seal & Shine

ProSpec® Paver Seal & Shine is designed to protect & extend the life of installed pavers, while enhancing color and adding a gloss finish. Made with a blend of methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on concrete, […]

ProSpec® Paver Seal & Shine Pro WB

ProSpec® Paver Seal & Shine Pro WB is a penetrating,  breathable, water-bourne sealer designed to protect & extend the life of installed pavers, while enhancing the color and adding a “wet-look” gloss. Made with a durable polysiloxane that does not yellow when exposed to the sun’s UV rays, it penetrates deep in the capillaries of […]

ProSpec® Paver Seal Pro WB

ProSpec® Paver Seal Pro WB is a penetrating, breathable, water-bourne sealer designed to protect & extend the life of installed pavers, while enhancing the color with a natural, non-gloss finish. Made with a durable polysiloxane that does not yellow when exposed to the sun’s UV rays, it penetrates deep in the capillaries of the paving […]

ProSpec® Paver Seal Ultra Shine

ProSpec® Paver Seal Ultra Shine is a high-solids, low-viscosity, sprayable sealing agent designed to protect & extend the life of installed pavers, while enhancing color and adding a high-gloss “wet look” finish. Made with a blend of 100% methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can […]

ProSpec® Paver Wash

ProSpec® Paver Wash is a mild, acidic product that dissolves and removes efflorescence (white mineral deposits) and rust stains from pavers and other cementitious or clay surfaces. This product is recommended to be used before applying a sealer to the surface of pavers in order to enables the sealer to penetrate and seal more effectively. Available […]

ProSpec® Polymer-Modified Stone Veneer Base Coat

ProSpec® Polymer-Modified Stone Veneer Base Coat (BOM #120442) is used as a scratch and base coat for real or manufactured stone veneer units. Also referred to as a cement plaster coating, it is a blend of cementitious materials, dried sand, and special performance admixtures designed to produce a highly-bondable substrate and to optimize consistency between […]

ProSpec® Pourable Concrete Patch

ProSpec® Pourable Concrete Patch (BOM #120672) is a Portland cement-based, flowable, squeegee-grade, polymer-modified patching and resurfacing mix for interior and exterior horizontal concrete substrates. Easy to use, it corrects defects up to ½ in. (13 mm) on concrete surfaces prior to applying new flooring materials or coatings. Depending on application, can also be used as […]

ProSpec® Premium Patch 100

ProSpec® Premium Patch 100 (BOM #120970) is a fast-setting, fiber-reinforced, high strength, cement-based repair mortar designed for applications where high early strength gain is needed to reduce down time. Apply neat from 1/2″ to 2″ deep, can be extended for repairs greater than 2″ deep.  BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK […]

ProSpec® Premium Patch 200

ProSpec® Premium Patch 200 (BOM #120971) is a rapid-setting, fiber reinforced, high strength, polymer-modified cement mortar designed for concrete repair and overlay applications requiring high durability. Apply neat from 1/2″ to 2″ deep, or can be extended for repairs greater than 2″ deep. Wide temperature range for application. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY […]

ProSpec® Rapid Patch® Commercial DOT Repair

ProSpec® Rapid Patch® Commercial DOT Repair is a rapid-setting, high-strength, polymer-modified, one-component hydraulic cement mortar designed for concrete repair and overlay applications requiring high durability. Meets or exceeds ASTM C928-R3 Standard Specification for Packaged, Dry, Very Rapid, Hardening Cementitious Materials for Concrete Repair. Resistant to salts, grease, oil, and other chemicals often found in the transportation […]

ProSpec® Rapid Patch® Horizontal Repair

ProSpec® Rapid Patch® Horizontal Repair (BOM #126173) is a high-strength, fast-setting, low shrinkage patching material for commercial and industrial concrete horizontal surfaces, as well as concrete pavements and highway applications. Approved by MNDOT under Rapid Hardening Materials for Repairs. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 126173 50 lb. bag 50 lb. […]

ProSpec® Rapid Patch® Critical Pavement Repair (CPR)

ProSpec® Rapid Patch® Critical Pavement Repair is a pre-blended, single-component, fast-setting, high-strength, polymer-modified, fiber reinforced repair mortar designed to be a quick, durable repair for essential heavy-duty surfaces such as airport runways, concrete highways, parking structures, freezer rooms, loading docks, industrial floors, and much more. It is freeze-thaw durable and contains corrosion inhibitor to mitigate […]

ProSpec® Rapid Patch® Self-Leveling Resurfacer

ProSpec® Rapid Patch® Self-Leveling Resurfacer (BOM #121017) is a cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for light industrial floors where a hard, flat smooth surface and a quick return to service is desired. Also use as an underlayment for installation of ceramic tile, stone, resilient flooring, carpet, […]

ProSpec® Rapid Patch® Vertical Repair

ProSpec® Rapid Patch® Vertical Repair (BOM #126171) is a non-slumping, high-strength, fast-setting, non-shrink, patching material for commercial and industrial vertical and overhead holes in concrete or masonry. Can be shaved or molded to required shapes. Initial set-time of 15 minutes. Maximum application thickness of 1½ in. (38 mm) per layer. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY […]

ProSpec® Rapid Strength Concrete Mix SE

ProSpec® Rapid Strength Concrete Mix SE (BOM #120965) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprietary performance additives designed to provide extended working time and high early strength for concrete applications requiring a minimum thickness of 1.5 in. (38 mm). Air-entrained for improved workability and freeze-thaw resistance, this mix is […]

ProSpec® Refractory Mortar

ProSpec® Refractory Mortar is a specially-engineered blend of specific cements and aggregates giving the mortar unique heat-resistance and thermal characteristics for use in high-temperature applications such as inside fire pit rings, setting chimney clay flue liners, parging a smoke chimney chamber, and setting fire bricks. Passes ASTM C 199 for mortar temperature limits to 2,550°F […]

ProSpec® Restoration Cleaner

ProSpec® Restoration Cleaner is a mild, acidic product that dissolves and removes efflorescence and rust stains from concrete and masonry surfaces. Restoration Cleaner is recommended to be used before applying a sealer to the surface of finished concrete or masonry applications, enabling the sealer to penetrate and seal more effectively. Restoration Cleaner may be used […]

ProSpec® RubCrete

ProSpec® RubCrete is a one-component, polymer-modified, Portland cement-based, interior and exterior resurfacer designed for smoothing and filling vertical and overhead concrete and masonry surfaces. Available in white (BOM #128170), #3 light gray (BOM #128180), and brown (BOM# 121153). BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY PACK WEIGHT PACK TYPE 128170 50 lb. bag 50 lb. […]

ProSpec® Salt Barrier

ProSpec® Salt Barrier is designed to protect & extend the life of concrete, masonry, pavers, retaining walls and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, […]

ProSpec® Salt Barrier WB

ProSpec® Salt Barrier WB is designed to protect & extend the life of concrete, masonry, pavers, retaining walls and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier WB provides a natural finish that maintains the original appearance of driveways, patios, garage floors, […]

ProSpec® Self-Consolidating Concrete Mix CI

ProSpec® Self-Consolidating Concrete Mix (SCC) CI (BOM #112026) is a dry, preblended, one-component, self consolidating, cementitious, polymer-modified concrete mix containing coarse aggregate, silica fume, and an integral migrating corrosion inhibitor. Designed for application thickness minimum of 1 in. (2.5 cm) and maximum thickness of 8 in. (20 cm). BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY […]

ProSpec® Set Accelerator

ProSpec® Set Accelerator (BOM #120376) is an ASTM C494, Type C, non-chloride, non-corrosive, liquid that improves workability and initial strength while it reduces the hydration time of cement.  The product is recommended for use during cooler weather to accelerate set time and reduce the risk of frozen mortar and concrete mixes. It is also recommended […]

ProSpec® Siloxane Final Seal

ProSpec® Siloxane Final Seal is an aromatic, solvent-based concrete sealer/water-repellant used to protect cementitious surfaces against the damage caused by water penetration. Can be applied to surfaces where a cure and seal coating was previously applied. Available in 1 gal. bottle (BOM #120828), 5 gal. pail (BOM #120827), and 55 gal. drum (BOM #120829). BOM […]

ProSpec® Siloxane Sealer

ProSpec® Siloxane Sealer is a clear, solvent-based sealer for concrete and cementitious materials. It penetrates and reacts chemically within the capillaries to repel water and protect from the damaging effects of rain, water penetration, chemicals, salt, freeze-thaw cycles, and smog. Provides natural-looking, non-yellowing, invisible protection.  Available in 1 gal. bottle (BOM #120826), 5 gal. pail […]

ProSpec® Stone Veneer Joint Grout

ProSpec® Stone Veneer Joint Grout is a mixture of dry cementitious materials and dried sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water […]

ProSpec® Stone Veneer Sealant

ProSpec® Stone Veneer Sealant is a one-component, high-performance, non-priming, gun-grade, polyurethane elastomeric sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry.  Available in 4 colors to coordinate with ProSpec Stone Veneer Grout: Gray (BOM #120450); Brown (BOM #120453); Tan (BOM #120452); and White (BOM #120451). BOM UNIT […]

ProSpec® Super Clear Coat

ProSpec® Super Clear Coat is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on burnish block, architectural concrete, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Enhances […]

ProSpec® Super Clear Coat Matte

ProSpec® Super Clear Coat Matte is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic, solvent-based sealer does not yellow under the sun’s UV rays. It enhances the beauty of colored or stamped concrete and exposed aggregate yet keeps a matte, low gloss finish. Available in 1 gal. bottle (BOM #120834), […]

ProSpec® Super Diamond Glaze

ProSpec® Super Diamond Glaze is a higher viscosity version of Super Clear Coat used for curing and sealing exposed aggregate and sealing colored concrete. Enhances the beauty and depth of the surface, giving it a rich “wet-look” high gloss while protecting from the damages caused by moisture penetration. Available in 1 gal. bottle (BOM #120836), […]

ProSpec® Surface Bonding Cement CR

ProSpec® Surface Bonding Cement CR is a versatile fiber-reinforced, Portland cement-based product used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, repair deteriorated stucco, and in the construction of concrete block walls that are dry stacked (without mortar) above the first course. Special fibers control […]

ProSpec® Tile Crete® Floor Mud

ProSpec® Tile Crete® Floor Mud is a blend of cementitious materials and oven dried sand developed to produce a water resistant and highly bondable substrate. Gray color is available in fine sand mix (BOM #105136), coarse sand mix (BOM #105154), and 50/50 mix (BOM #105141) Tile Crete is pre-blended and manufactured to optimize consistency from batch-to-batch. Simply add […]

ProSpec® TraxGrip

ProSpec® TraxGrip gives a light texture to concrete flatwork for a slip-resistant surface. Often used commercially on entrance floors, garage floors, steps, patios, walkways, and any surface where additional texture is desired to increase non-slip characteristics. TraxGrip is an optically clear thermoset polymer resin. Nearly invisible on the applied floor surface, it is added to […]

ProSpec® Underground Utility Mortar

ProSpec® Underground Utility Mortar (BOM #120704) is a is a dry, preblended, air-entrained mortar mix containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. This product meets ASTM C270 and ASTM C1714 requirements. BOM UNIT SIZE UNIT WEIGHT PACK QUANTITY […]

ProSpec® Vertical Concrete Surface Finisher

ProSpec® Vertical Concrete Surface Finisher is a superior cementitious waterproofing coating for concrete and masonry. It provides a protective and waterproof surface while eliminating the rubbing process. Spray or brush applied, available in light gray (BOM #120765) or white (BOM #120764). For added performance, durability, and improved bonding, Vertical Concrete Surface Finisher is designed to […]

ProSpec® Vinyl Concrete Patch

ProSpec® Vinyl Concrete Patch a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather-edge to 2 in. (51 mm) thick per lift. Typically supports foot traffic in 8-12 hours, wheeled traffic in 48 hours. Available in 10 lb. pail (BOM #127634) and 50 lb. […]

ProSpec® Waterproofing & Crack Isolation Membrane

ProSpec® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675), 3.5 gal. pail (BOM #127630), and 5 gal. (BOM #120676). BOM UNIT SIZE UNIT […]