SPEC MIX^® Stone Veneer Mortar – Joint Grout

SPEC MIX® Stone Veneer Joint Grout (BOM #108404) is a blend of dry, cementitious materials, and masonry sand specifically designed to fill the joints between various precast, lightweight, masonry veneer systems. TCC Materials also offers SPEC MIX joint grout made with white cement and/or with integral color. Also available in 3,000 lb. (BOM #102310) bulk bags to work with our silo system. Please contact your salesperson for more information.

SPEC MIX^® Self-Consolidating Grout

SPEC MIX® Self-Consolidating Grout (SCG) (BOM #102863) is a dry, preblended grout specifically designed to be highly fluid without segregation of the constituents. SPEC MIX® SCG is used to bond together adjacent masonry units, fill bond beams and occupy all areas around steel reinforcement in the cores of the masonry assemblage without mechanical consolidation or reconsolidation. Meets ASTM C 476 requirements for reinforced masonry construction. TCC Materials also offers SPEC MIX Self-Consolidating Grout as a fine mix (BOM #104381). Also available in 3,000 lb. (BOM #103864) bulk bags to work with our silo system. Please contact your salesperson for more information.

SPEC MIX^® Corefill Masonry Grout – 5,000 PSI

SPEC MIX® Corefill Grout - 5,000 psi (BOM #106903) is a dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction. Also available in 3,000 lb. (BOM #101472) bulk bags to work with our silo system. Please contact your salesperson for more information.

SPEC MIX^® Corefill Masonry Grout – 4,000 PSI

SPEC MIX^® Corefill Grout - 4,000 psi (BOM #105424) is a dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction.

Also available in 3,000 lb. (BOM #106004) bulk bags to work with our silo system. Please contact your salesperson for more information.

SPEC MIX^® Corefill Masonry Grout – 3,000 PSI

SPEC MIX® Corefill Grout - 3,000 psi (BOM #106745) is dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction. TCC Materials also offers Corefill Grout with course sand (BOM #107236) or fine sand (BOM #105675). Also available in 3,000 lb. (BOM #104768) bulk bags Corefill Grout with course sand (BOM #105721) or fine sand (BOM #104257). to work with our silo system. Please contact your salesperson for more information.

TechPro^® Stone Veneer Joint Grout

TechPro® Stone Veneer Joint Grout is a mixture of dry cementitious materials and dried sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water only. "Step 3" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Available in 4 colors to compliment or contrast veneer units: Gray (BOM #120446); Brown (BOM #120449); Tan (BOM #120448), White (BOM #120447); and Charcoal (BOM #130110).

Tenon^® Masonry Veneer Joint Grout

Tenon® Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and dried sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Tenon Pro Veneer Technology (PVT) creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466).

Tenon^® Thermaseal^® Geothermal Grout

Tenon® Thermaseal^® Geothermal Grout is a a thermally-conductive cementitious grout engineered for application of vertical and horizontal ground source heat pumps and geothermal well fields. Non-toxic and non-shrink with a high solids content and a low-permeability factor making it ideal for ground source heat loops and safe for contact with potable ground water. A blend of thermally-conductive sand with Portland cement for a range of thermal conductivities depending on design requirements. Thermaseal Geothermal Grout also offers low-absorption with a rigid seal to prevent integration of aquifers and is made in three versions, MN Mix (BOM #121014), and 0.75 HF (high-flow) (BOM 129569).

Tenon^® High Strength Precision Grout

Tenon® High Strength Precision Grout (BOM #120707) is a ready-to-use, high-strength, flowable precision grout mix with excellent working time and early strength ensuring quick job startups and reducing cost. This specially-formulated mix can be pumped into areas inaccessible by conventional grouting methods. High Strength Precision Grout is a non-shrink, non-metallic, non-staining, non-porous, high-density, pumpable formula designed for precision grouting applications and can be extended with the proper aggregates up to 50%.

• Highly-fluid grout with excellent working time and early strength
• Non-shrink, non-corrosive, non-staining, non-porous, and non-metallic
• Applicable Standards: ASTM C-1107 and CRD-C 621

Tenon^® Construction Grout

Tenon® Construction Grout is a non-shrink, non-metallic, Portland-limestone cement-based mixture of hydraulic cement, aggregate, and additives for general purpose structural grouting. Meets or exceeds ASTM C-1107. Available in 50 lb. bags (BOM #120720) and 3000 lb. bags (BOM #113219).