Tile Mortars


Akona® White Glass Block Mortar

Akona® White Glass Block Mortar (BOM # 102627) is a specially-formulated blend of select white silica sands, white cement and workability agents which result in an easy-to-handle, high strength mortar. It is designed for installing glass block windows, shower and bath walls or masonry units where a white mortar is desired. This product is suitable for both interior and exterior applications.


Multi-Set 917

Multi-Set (BOM #FTS-917) is an economical, polymer-modified, dry-set mortar designed for bonding of all types of tiles. It may be used for either walls or floors for both interior and exterior applications where a liquid latex-modified mortar is recommended. MultiSet 917 significantly improves bond strength and freeze-thaw stability — performance characteristics typically available only through the addition of liquid-latex additives to dry-set mortar. ANSI: A118.4


Pro M-Bond Ultra 918

Pro M-Bond Ultra is a professional-grade, polymer-modified bond coat for setting high lug, absorptive, semi-vitreous, vitreous ceramic tiles and natural stone for service in residential and commercial use. It uses an advanced poly-fusion technology and can be used in a mortar bed from 3/32" to 3/16" (2.4 to 4.8 mm) after the tiles have been properly embedded. Pro M-Bond Ultra is available in gray (BOM #103164) or white (BOM #104041). ANSI: A118.4, A118.11


Pro M-Flex Strata 914

Pro M-Flex Strata is a flexible, polymer-modified, latex & Portland cement mortar which utilizes an advanced poly-fusion technology. When cured, each separate polymer imparts distinct characteristics which compliment the other polymers forming a union which provides for 48% higher flexural strength than conventional mortars, thus furnishing the ultimate in a single-component, latex-Portland cement mortar. Pro M-Bond Strata is available in gray (BOM #120545) and white (BOM #120546).


Pro M-Lite Tile & Stone Mortar 929

Pro M-Lite Tile and Stone Mortar offers high flexibility and bond strength for a wide variety of floor and wall tile installations. Excellent for setting large format tile or stone, Pro M-Lite will not sag or slip on walls and offers non-slump performance for floor installations. Pro M-Lite is 40% lighter than traditional mortars, providing excellent handling characteristics. A 30 lb. (13.6 kg) bag covers the same area as a 50 lb. (22.7 kg) bag of traditional mortar. And because it’s formulated with recycled material, it contributes to LEED certification. Available in gray (BOM #104042) and white (BOM #104043). ANSI: A118.4 & A118.11


QuickCure 908

QuickCure (BOM #FTS-90825) is a polymer-modified, dry-set mortar designed to be used as a fast-setting bond coat for the installation of all types of tile over a variety of substrates. QuickCure allows grouting within two hours (depending on temperatures and humidity.) ANSI: A118.4 & A118.11


ThinSet 911

ThinSet is specially-formulated, non-modified, dry-set mortar for floor and wall installations of absorptive, semi-vitreous and vitreous tiles. ThinSet produces an excellent bond with greater coverage than conventional dry-set mortars for ceramic tile. PST is available in gray (BOM #104037) or white (BOM #104038) options. For porcelain and glass tile use PST additive (BOM #104040). ANSI: A118.1


UniFlex 916

A technological breakthrough in the development of a truly elastomeric dry-set mortar for the installation of ceramic tile and dimension stone. UniFlex is composed of a unique synergism of latex polymers and Portland cement. UniFlex may also be used as an elastomeric anti-fracture membrane for the installation of ceramic tile, marble, slate and granite over a variety of surfaces. UniFlex is available a variety of gray (BOM #FTS-916G) and white (BOM #FTS-916G).


 

 

SHARE