Tile Setting


ColorSet Epoxy System 931 - Part A

ColorSet Epoxy System is a patented, 100% solids blend of epoxies and silica fillers designed to be used for the setting and grouting of ceramic tile and pavers over a wide variety of interior and exterior substrates. It produces a mortar that is stain resistant, impermeable, and high in strength and shock resistant. ColorSet Epoxy System has an exceptionally high resistance to acids, alkalis and most solvents. For colors, click on the Printable Info below or contact your sales representative for colors and BOM numbers. ColorSet Expoxy System Part A is specifically designed for use with ColorSet Epoxy System Part B. Meets ANSI A118.3


ColorSet Epoxy System 931 - Part B

ColorSet Epoxy System is a patented, 100% solids blend of epoxies and silica fillers designed to be used for the setting and grouting of ceramic tile and pavers over a wide variety of interior and exterior substrates. It produces a mortar that is stain resistant, impermeable, and high in strength and shock resistant. ColorSet Epoxy System has an exceptionally high resistance to acids, alkalis and most solvents. ColorSet Expoxy System Part B is a neutral color specifically designed for use with ColorSet Epoxy System Part A. Meets ANSI A118.3


EverWhite 932

EverWhite is a three-component, 100% solids blend of epoxies and silica fillers specially formulated to retain its brilliant white coloring even during prolonged exposure to direct sunlight. It is to be used for the setting and grouting of ceramic tile and pavers over a wide variety of substrates. It produces a grout/mortar that is stain resistant, and high in strength and shock resistant. EverWhite has exceptionally high resistance to acids, alkalis and most solvents. EverWhite consists of one each of "A", "B", and "C" parts packaged in a mixing pail and is recommended for vertical wall applications only. Meets ANSI: ANSI A108.6 & A118.3


Flashing Tape (for ProRed 963 & UltraCure 971)

Our fiber fabric tape (BOM #FTP-971TAP) comes in 50’ rolls and is designed for use with Pro-Red Waterproofing Membrane and UltraCure.


Grout Colorant & Sealer 996

Grout Colorant & Sealer is a long-lasting, highly wear-resistant, durable, urethane acrylic grout stain. Ideal for renewing or changing the color of existing sanded or non-sanded grout joints, this epoxy formula also seals and protects grout from moisture and staining and is available in all 40 C-Cure grout colors. For high-traffic, commercial projects ask about "cross-link" hardener additive.


LevelFloor Additive 968

LevelFloor Additive (BOM #FTA-9681) is an acrylic additive to use with UniLayment FastSet N/S (in place of water) as a leveler for embossed flooring. Sold in full cartons (4 gallons/carton) only. Do not freeze.


MP NonSanded Grout 923

MP NonSanded Grout is one-part, latex-Portland cement grout that provides the user the highest performance available in the industry, in an easy-to-use, just-add-water material. Its unique blend of Portland cement, latex modifiers and colorfast pigments provides for a superior grout with excellent flexural and bond strengths, color control, minimal efflorescence and high compressive strength. MP NonSanded Grout is specifically designed for tile installations of 1/16" to 1/8" that will be subjected to thermal shock. It resists bacteria, fungus and alkalis and does not shrink or dust. MP Grouts are available in 10 pound pails or 25 pound bags.


MP Sanded Grout 924

MP Sanded Grout is one-part, latex-Portland cement grout that provides the user the highest performance available in the industry, in an easy to use, just-add-water material. Its unique blend of Portland cement, specially-graded silica fillers, latex modifiers and colorfast pigments provides for a superior grout with excellent flexural and bond strengths, color control, minimal efflorescence and high comprehensive strength. MP Sanded Grout is specifically designed for tile installations that will be subjected to thermal shock and with joints from ⅛" to ½" thick. It resists bacteria, fungus, alkalis and does not shrink or dust. MP Grouts are available in 10 pound pails or 25 pound bags.


Porcelain, Stone & Tile (PST) 948

Porcelain, Stone & Tile or PST (formerly CureFlex) is a high-solids, flexible, acrylic latex admixture for use with ThinSet to provide a durable bond to porcelain, stone and glass tile. It provides the highest bond strength available in a flexible mortar for all types of tile over a variety of substrates, including difficult substrates such as exterior grade plywood, vinyl and old cutback adhesives. PST is available in 2.1 gallon bottles (BOM #104039) or 5 gallon pails (BOM #104040). ANSI: A118.4 & A118.11 when mixed with C-Cure dry-set mortars.


Pro M-Bond Ultra 918

Pro M-Bond Ultra is a professional-grade, polymer-modified bond coat for setting high lug, absorptive, semi-vitreous, vitreous ceramic tiles and natural stone for service in residential and commercial use. It uses an advanced poly-fusion technology and can be used in a mortar bed from 3/32" to 3/16" (2.4 to 4.8 mm) after the tiles have been properly embedded. Pro M-Bond Ultra is available in gray (BOM #103164) or white (BOM #104041). ANSI: A118.4, A118.11


Pro M-Flex Strata 914

Pro M-Flex Strata is a flexible, polymer-modified, latex & Portland cement mortar which utilizes an advanced poly-fusion technology. When cured, each separate polymer imparts distinct characteristics which compliment the other polymers forming a union which provides for 48% higher flexural strength than conventional mortars, thus furnishing the ultimate in a single-component, latex-Portland cement mortar. Pro M-Bond Strata is available in gray (BOM #120545) and white (BOM #120546).


ProGrout ColorCure Additive 945

ProGrout ColorCure Additive is a blend of acrylic emulsions and special chemical modifiers specifically formulated to significantly improve bond strength, flexibility, resistance to frost & thermal shock of Portland cement based grouts. Mix with grout powder (AR922, MP924, & MP923) in place of water (approx. ½ gallons per 25 pounds of powder for 924 and 1 gallon per 25 lbs of powder for 923.)


Pro M-Lite Tile & Stone Mortar 929

Pro M-Lite Tile and Stone Mortar offers high flexibility and bond strength for a wide variety of floor and wall tile installations. Excellent for setting large format tile or stone, Pro M-Lite will not sag or slip on walls and offers non-slump performance for floor installations. Pro M-Lite is 40% lighter than traditional mortars, providing excellent handling characteristics. A 30 lb. (13.6 kg) bag covers the same area as a 50 lb. (22.7 kg) bag of traditional mortar. And because it’s formulated with recycled material, it contributes to LEED certification. Available in gray (BOM #104042) and white (BOM #104043). ANSI: A118.4 & A118.11


QuickCure 908

QuickCure (BOM #FTS-90825) is a polymer-modified, dry-set mortar designed to be used as a fast-setting bond coat for the installation of all types of tile over a variety of substrates. QuickCure allows grouting within two hours (depending on temperatures and humidity.) ANSI: A118.4 & A118.11


ThinSet 911

ThinSet is specially-formulated, non-modified, dry-set mortar for floor and wall installations of absorptive, semi-vitreous and vitreous tiles. ThinSet produces an excellent bond with greater coverage than conventional dry-set mortars for ceramic tile. PST is available in gray (BOM #104037) or white (BOM #104038) options. For porcelain and glass tile use PST additive (BOM #104040). ANSI: A118.1


UniFlex 916

A technological breakthrough in the development of a truly elastomeric dry-set mortar for the installation of ceramic tile and dimension stone. UniFlex is composed of a unique synergism of latex polymers and Portland cement. UniFlex may also be used as an elastomeric anti-fracture membrane for the installation of ceramic tile, marble, slate and granite over a variety of surfaces. UniFlex is available a variety of gray (BOM #FTS-916G) and white (BOM #FTS-916G).


UniLayment FastSet N/S 969

C-Cure® UniLayment FastSet N/S (BOM #FTP-969NS) is a non-sanded, polymer-modified Portland cement-based underlayment and patching compound designed to level and patch most types of floors prior to the installation of resilient flooring, carpet, ceramic tile, slate, granite or marble. For general applications, UniLayment FastSet 969 requires only water to develop a dense, water-resistant surface.


TECH-MIX® Type 1 Tile Adhesive

TECH-MIX® Type 1 Tile Adhesive is a multi-purpose, superior strength, high-performance, non-slip, acrylic latex adhesive mastic designed specifically for setting various types of ceramic, glazed and mosaic tile, marble and stone on interior applications. Available in 1 gal. pails (BOM #120647) and 3.5 gal. pails (BOM #120773).


 

 

SHARE