Tech-Mix®


 

Tech-Mix® PCL Mortar Pro - Type N

Tech-Mix® PCL Mortar Pro - Type N is a consistent, specifically-formulated blend of Portland cement, hydrated lime, and dried sand with superior bond, water retention, and board life. Used for multi-purpose interior and exterior masonry construction including laying brick, block, and stone. Type N is suitable for load-bearing, above-grade construction. 

Available in 80# bags (BOM #111207) and 3000# bulk bags (BOM #111118). PCL Mortar Pro is also available with preblended color and/or integral water repellant. For more information, contact your sales representative.


Tech-Mix® PCL Mortar Pro - Type S

Tech-Mix® PCL Mortar Pro - Type S is a consistent, specifically formulated blend of Portland cement, hydrated lime, and dried sand with superior bond, water retention, and board life. Used for multi-purpose interior and exterior masonry construction including laying brick, block, and stone. Type S is suitable for load-bearing construction above or below grade.

Available in 80# bags (BOM #111217) and 3000# bulk bags (BOM #111119). PCL Mortar Pro is also available with preblended color and/or integral water repellant. For more information, contact your sales representative.


Tech-Mix® Corefill Masonry Grout

Tech-Mix® Corefill Masonry Grout is formulated for superior flow to fill masonry voids while meeting ASTM C476 requirements for reinforced masonry construction. Corefill Masonry Grout is used to bond masonry units and steel reinforcement in the cores of the units together, as well as, filling reinforced bond beams.

Available in 80# bags (Coarse - BOM #111227; Fine - BOM #111237) and 3000# bulk bags (Coarse - BOM #111120; Fine - BOM #111121).


Tech-Mix® Concrete Mix

Tech-Mix® Concrete Mix is a high strength pre-blended Portland cement mixture for pouring concrete 2 inches thick or greater. Used for general building and repairing steps, slabs, walks, and floors.

Available in 60# bags (BOM #104879) and 80# bags (BOM #104883). 


Tech-Mix® Fast-Setting Concrete Mix

Tech-Mix® Fast-Setting Concrete Mix (BOM #104877) is a specially formulated accelerated setting. high early strength mortar for use in applications of 2" thick or greater.


Tech-Mix® High-Strength 5000 Concrete Mix

Tech-Mix® High-Strength 5000 Concrete Mix is a commercial grade blend of aggregate, sand, and Portland cement specifically designed for higher early strength. Ideal for cold-weather applications, it achieves 5,000 psi after 28 days. Used for any application of 2" thick or greater.

Available in 60# bags (BOM #101122) and 80# bags (BOM #104882).


Tech-Mix® Sand Topping Mix

Tech-Mix® Sand Topping Mix (BOM #104880) is a uniformly pre-blended Portland cement and sand mixture for placing concrete overlays 2" thick or less. Used for patching and leveling steps, slabs, walks, and floors.


TechMix® Masonry Cement

TechMix® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar applications for brick and stone with consistent strength, durability, and workability. Climate conditions, exposure, and engineering requirements must be considered when selecting the mortar type.

Each type conforms to ASTM C-91 Standard Specification for Masonry Cement, and are used to produce ASTM C270 for Type N, Type S, or Type M mortars respectfully.


Tech-Mix® Crack-Resistant Concrete Mix

Tech-Mix® Crack-Resistant Concrete Mix (BOM #100260) is a high-strength, pre-blended Portland cement mixture for pouring concrete 2" (5 cm) thick or greater. Crack-Resistant Concrete Mix is air-entrained to increase freeze-thaw durability and fiber-reinforced to reduce shrinkage cracks and improve impact resistance. Meets or exceeds requirements of ASTM C387.


Tech-Mix® Mortar Mix - Type N

Tech-Mix® Mortar Mix Type N (BOM #104881) is a specially formulated blend of Portland cement, lime, and sand for laying brick, block, and stone for all types of construction. Meets requirements of ASTM C270.


Tech-Mix® Mortar Mix - Type S

Tech-Mix® Mortar Mix Type S (BOM #104885) is a specially formulated blend of Portland cement, lime, and sand for laying brick, block, and stone on either load-bearing or non-load-bearing walls. Suitable for construction below grade.


Tech-Mix® Max Strength Concrete Mix

Tech-Mix® Max Strength Concrete Mix (BOM #110259) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprietary performance additives designed to provide extended working time and high early strength for concrete applications requiring a minimum thickness of 1½ in. (38 mm). Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack resistance and increased toughness.


Tech-Mix® Level-Flo® 100

Tech-Mix® Level-Flo® 100 (BOM #120736) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied from ⅛"-1½" (3-38 mm) neat and up to 5" (127 mm) extended.. Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings in 3 days. Use with Level-Flo Primer or Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.


Tech-Mix Level-Flo® 200

Tech-Mix® Level-Flo® 200 (BOM #120737) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floorcovering installation. Can be applied from ⅛"-2" (3-51mm) neat, and up to 5" (127 mm) extended. Fast-setting, accepts non-moisture sensitive tile and stone in as little as 4 hours, and moisture sensitive floorcoverings in 16-24 hours. Use with Level-Flo Primer or Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.


Tech-Mix® Level-Flo® 300

Tech-Mix® Level-Flo® 300 (BOM #120643) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floorcovering installation. Designed for fast leveling of floors where increased strength is required; reaching 28-day ASTM C109 Compressive Strength of 6,000 psi. Can be applied from ⅛"-2" (3-51 mm) neat, and up to 5" (127 mm) extended. Fast-setting, accepts non-moisture sensitive tile and stone in as little as 3-4 hours, and moisture sensitive floorcoverings in 6 hours. Use with Level-Flo Primer or Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.


Tech-Mix® Level-Flo® 50

Tech-Mix® Level-Flo® 50 (BOM #120735) is a is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied as thick as 1" down to ⅛" (25-3 mm). Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings in 3 days. Excellent for encapsulating radiant heat systems. Use with Tech-Mix Level-Flo Primer or Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.


Tech-Mix® Level-Flo® Primer

Tech-Mix® Level-Flo® Primer (1 gal. BOM #120639, 5 gal. BOM #120641) is a high-quality, liquid-polymer latex for interior use with Tech-Mix Level-Flo self-leveling and concrete repair products. Applied to porous surfaces, this substrate primer reduces water absorption to ensure a flowable mix and promotes bonding. Tech-Mix Level-Flo Primer or Primer Pro are required to be applied to all substrates before placing Tech-Mix Level-Flo Underlayments or Wear-Toppings. 


Tech-Mix® Type 1 Tile Adhesive

Tech-Mix® Type 1 Tile Adhesive (1 gal. BOM #120647, 3.5 gal. BOM #120773) is a multi-purpose, superior strength, high-performance, non-slip, acrylic latex adhesive mastic designed specifically for setting various types of ceramic, glazed and mosaic tile, marble and stone on interior applications.


Tech-Mix® Tile & Grout Defender

Tec-Mix® Tile & Grout Defender (1 qt. BOM #120939, 1 gal. BOM #120653) is an all-in-one tile and grout sealer and enhancer plus grout release. As a grout release agent, Tile & Grout Defender speeds grouting, resists against grout pigment stains and is compatible with all cement-based grout types. Users can grout within 10 minutes of application and grout clean-up is much easier. As a sealer and enhancer, Tile & Grout Defender enriches a tile’s natural beauty and makes most tile and grout joints resistant to oil and water-based stains.


Tech-Mix® Waterproofing & Crack Isolation Membrane

Tech-Mix® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120645) and 3.5 gal. pail (BOM #120796).


Tech-Mix® Commercial Tile Mortar PM

Tech-Mix® Commercial Tile Mortar PM is an economical Portland cement-based, polymer-modified ceramic tile setting mortar designed for floor and wall use on both interior and exterior applications over concrete. Meets ANSI A118.4 and ISO 13007 C2 when mixed with water. Installation must conform to the current specifications in ANSI A108 and the TCNA Handbook for Ceramic Tile Installations.

Available in Gray (BOM#120802) and White (BOM#121143)


 

 

SHARE