Stucco


SPEC MIX® Stucco Scratch & Brown

SPEC MIX® Scratch & Brown Stucco is a custom blend of cementitious materials, additives, and aggregates meeting ASTM C 926 requirements and designed to be used as the scratch and/or brown coat in a traditional three-coat stucco system. TCC Materials offers stucco Scratch & Brown in 100% fine sand (BOM #108235), 50/50 blend of fine to course sands (BOM #102207), and 70/30 blend of fine and course sands (BOM #103655). 

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stucco Scratch & Brown with Fibers

SPEC MIX® Scratch & Brown Stucco with Fibers is a custom blend of cementitious materials, additives, aggregates and fibers meeting ASTM C 926 requirements and designed to be used as the scratch and/or brown coat in a traditional three-coat stucco system. TCC Materials offers stucco Scratch & Brown with fibers in 100% fine sand (BOM #108663), 50/50 blend of fine to course sands (BOM #10229), and 70/30 blend of fine and course sands (BOM #103654). 

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stucco Fiber Base Coat - ICC

SPEC MIX® Fiber Base Coat Stucco (BOM #103557) is an ICC code approved, dry, preblended cement stucco basecoat that is engineered with proprietary admixtures and fibers that reduce shrinkage and cracking. The SPEC MIX Fiber Base Coat is computer batched for consistency and performance unmatched by traditional field-mixed stucco. The SPEC MIX Fiber Base Coat can be installed as a "One Coat Stucco" basecoat (code approved) or as the scratch and brown coat in a traditional stucco application. Product meets the requirements for ASTM C 926.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stucco Colored Finish Coat

SPEC MIX® Colored Finish Coat Stucco is a custom blend cementitious material, additives, aggregates and pigment meeting ASTM C 926 requirements. It is designed as the finish coat for traditional two- or three-coat stucco systems.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


QUIKRETE® Stucco Base Coat

QUIKRETE® Base Coat Stucco - Pump Grade (BOM #103191) is a Portland cement based stucco, designed to be used as the scratch and/or brown coat in a 3-coat stucco application, or the first coat in a 2-coat application. This product contains special additives which prevent premature loss of mixing water and provide increased workability. This product is intended for use over galvanized expanded metal lath or solid bases such as masonry, cast-in-place or precast concrete.


QUIKRETE® Stucco Finish Coat

QUIKRETE® Stucco Finish Coat White (BOM #100678) is a Portland cement based stucco finishing plaster designed for use as the color and texture coat over Portland cement base coat or fiberglass reinforced stucco. Requires only the addition of water.


SAKRETE® Mortar Mix Type N

SAKRETE® Mortar Mix Type N (BOM #100770) is a regular-strength, general-purpose mortar mix for laying brick, block and stone in wall construction or for repairing damaged mortar joints. Just add water, mix, and use.


SAKRETE® Mortar-Stucco Mix Type S

SAKRETE® Mortar-Stucco Mix Type S is a contractor-grade mortar mix for laying brick, block, and stone in load-bearing walls and construction above or below grade level. It can also be used as a scratch and brown coat in stucco application. Just add water, mix, and use. Available in 80 lb. bag (BOM #100531) and 50 lb. pail (BOM #120023)


 

 

SHARE