Spec Mix®


 

SPEC MIX® Building Stone Mortar

SPEC MIX® Building Stone Mortar is specially designed for masonry building masonry walls with full depth stone units. Whether the specification calls for soft or hard stone, Building Stone mortar mix is engineered to match the specific properties of each stone to increase the mortar-to-stone bond strength while allowing the mason to lay more stone every day. This product meets ASTM C 270.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Corefill Masonry Grout - 3,000 PSI

SPEC MIX® Corefill Grout - 3,000 psi (BOM #106745) is dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction. TCC Materials also offers Corefill Grout with course sand (BOM #107236) or fine sand (BOM #103901).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Corefill Masonry Grout - 4,000 PSI

SPEC MIX® Corefill Grout - 4,000 psi (BOM #108576) is a dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Corefill Masonry Grout - 5,000 PSI

SPEC MIX® Corefill Grout - 5,000 psi (BOM #106903) is a dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar - Colored

SPEC MIX® Portland Lime & Sand with Color is a dry, preblended mortar mix containing Portland cement, hydrated lime, dried masonry sand and color pigment formulated for superior bond, workability and board life. This product meets ASTM C270 and ASTM C1714 requirements. TCC Materials offers SPEC MIX® Portland Lime & Sand mortar with color in Type N, Type S, and Type M. PCL Sand with color is also available with an Integral Water Repellant (IWR).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar - White

SPEC MIX® Portland Lime & Sand White Mortar is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX Portland Lime & Sand mortar in Type N (BOM #106425), Type S (BOM #106257), and Type O (BOM #108645). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar (w/ Silica Sand) - White

SPEC MIX® Portland Lime & Sand White Mortar w/ Silica Sand is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried silica sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX Portland Lime & Sand mortar in Type N (BOM #107615), Type S (BOM #107134), and Type O (BOM #109740). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar

SPEC MIX® Portland Lime & Sand Mortar is a dry, preblended mortar mix containing Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX® Portland Lime & Sand mortar in Type N (BOM #101212), Type S (BOM #101013), Type M (BOM #101320), and Type O (BOM #107500). PCL Sand is also available with an Integral Water Repellant (IWR).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar w/ Integral Water Repellant

SPEC MIX® IWR (Integral Water Repellent) Mortar is a dry, preblended mortar mix containing Portland cement and hydrated lime, mortar cement or masonry cement with dried masonry sand and water repellant admixture formulated for water repellency, superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. SPEC MIX IWR (Integral Water Repellent) Mortar is available in Type N, S, and M and can also be ordered with integral color.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Polymer-Modified Setting Bed Mortar

SPEC MIX® Polymer Modified Setting Bed Mortar is specially engineered as a thick, solid mortar bed for constructing horizontal surfaces with natural and manufactured paving units. This product contains a unique blend of polymers and other performance-enhancing admixtures allowing it to meet ANSI and ASTM requirements. PMSBD can be used as a thick, fortified bedding mortar for residential and commercial paving unit applications as well as joint grouting material between horizontal pavers. It can also be used as a polymer-modified, dry-pack setting bed material in interior and exterior installations allowing light to heavy traffic.

Available in 80 lb. bags (BOM #100473) and 3,000 lb. bulk bags (BOM #104720) to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Polymer-Modified Adhered Veneer Mortar

SPEC MIX® Polymer Modified Adhered Veneer Mortar (PMAVM) (BOM #103592) is a blend of dry cementitious materials, masonry sand and performance admixtures specifically designed to provide superior bond for adhered manufactured and natural thin stone as well as brick veneer units. PMAVM is designed to provide excellent workability, cohesion, high bond strength, sag resistance, water resistance, efflorescence minimization, and durability. This product meets the requirements of ASTM C 270 and ASTM C 1714 for Type S mortars including ANSI A118.4 and ACI 530 shear bond stantards. TCC Materials also offers PMAVM with integral color.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Self-Consolidated Grout

SPEC MIX® Self-Consolidating Grout (SCG) (BOM #102863) is a dry, preblended grout specifically designed to be highly fluid without segregation of the constituents. SPEC MIX SCG is used to bond together adjacent masonry units, fill bond beams and occupy all areas around steel reinforcement in the cores of the masonry assemblage without mechanical consolidation or reconsolidation. Meets ASTM C 476 requirements for reinforced masonry construction. TCC Materials also offers SPEC MIX Self-Consolidating Grout as a fine mix (BOM #104381).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Set Accelerated Mortar

SPEC MIX® Set Accelerated Mortar is a dry preblended mortar mix containing Portland cement, hydrated lime or masonry Cement or mortar cement, dried masonry sand, and set accelerating admixtures formulated for faster set times in cold weather while maintaining superior bond, water retention and board life. This product meets ASTM C 270, ASTM C 1384 and ASTM C 1714 requirements. TCC Materials offers Set Accelerated Mortar in Type S (BOM #103757). Other types are available upon request.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Setting Bed Mortar

SPEC MIX® Setting Bed Mortar is specially engineered as a thick, solid mortar bed for constructing horizontal surfaces with natural and manufactured paving units. This dry, preblended mortar contains cementitious materials and dried aggregates that are mixed with a low-water addition rate for a zero-slump dry pack base material. Now contractors have high-quality, consistent bedding materials that increase daily productivity every time. Setting Bed Mortar can be sued as a paving unit base for residential and commercial paving unit applications. It can be used for interior and exterior installations allowing light and medium traffic.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Shotcrete

SPEC MIX® Shotcrete products are designed for a wide range of applications. Shotcrete products are available in standard formulizations and custom mix designs to fit specific project requirements -- whether you are casting new structures or restoring existing projects, above ground or below. Please contact your sales representative for more information.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stone Veneer Mortar - Joint Grout

SPEC MIX® Stone Veneer Joint Grout (BOM #108404) is a blend of dry, cementitious materials, and masonry sand specifically designed to fill the joints between various precast, lightweight, masonry veneer systems. TCC Materials also offers SPEC MIX joint grout made with white cement and/or with integral color.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stone Veneer Mortar - Scratch Base

SPEC MIX® Scratch & Base Mortar (BOM #108540) is a blend of dry, cementitious materials and masonry sand specifically designed for superior bond and durability. Use SPEC MIX Scratch & Base as a base coat for attaching precast, lightweight masonry units over wood and lath, concrete or masonry substrates. TCC Materials also offers SPEC MIX Scratch & Base with integral color.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Adhered Veneer Mortar

SPEC MIX® Adhered Veneer Mortar (AVM) is a blend of dry cementitious materials and masonry sand specifically designed to provide superior bond for precast, lightweight masonry veneer units to base surfaces, and is also offered with integral color. TCC Materials offers Adhered Veneer Mortar in Type N (BOM #109302) and Type S (BOM #109454) This product meets ASTM C270 and ASTM C 1714, and CSA A 179 for Type S mortar including ACI 530 shear strength requirments.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stucco Colored Finish Coat

SPEC MIX® Colored Finish Coat Stucco is a custom blend cementitious material, additives, aggregates and pigment meeting ASTM C 926 requirements. It is designed as the finish coat for traditional two- or three-coat stucco systems.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stucco Fiber Base Coat - ICC

SPEC MIX® Fiber Base Coat Stucco (BOM #103557) is an ICC code approved, dry, preblended cement stucco basecoat that is engineered with proprietary admixtures and fibers that reduce shrinkage and cracking. The SPEC MIX Fiber Base Coat is computer batched for consistency and performance unmatched by traditional field-mixed stucco. The SPEC MIX Fiber Base Coat can be installed as a "One Coat Stucco" basecoat (code approved) or as the scratch and brown coat in a traditional stucco application. Product meets the requirements for ASTM C 926.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stucco Scratch & Brown

SPEC MIX® Scratch & Brown Stucco is a custom blend of cementitious materials, additives, and aggregates meeting ASTM C 926 requirements and designed to be used as the scratch and/or brown coat in a traditional three-coat stucco system. TCC Materials offers stucco Scratch & Brown in 100% fine sand (BOM #108235), 50/50 blend of fine to course sands (BOM #102207), and 70/30 blend of fine and course sands (BOM #103655). 

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stucco Scratch & Brown with Fibers

SPEC MIX® Scratch & Brown Stucco with Fibers is a custom blend of cementitious materials, additives, aggregates and fibers meeting ASTM C 926 requirements and designed to be used as the scratch and/or brown coat in a traditional three-coat stucco system. TCC Materials offers stucco Scratch & Brown with fibers in 100% fine sand (BOM #108663), 50/50 blend of fine to course sands (BOM #10229), and 70/30 blend of fine and course sands (BOM #103654). 

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Underground Utility Mortar (WI DOT)

SPEC MIX® Underground Utility Mortars (WI DOT) are dry, preblended mortar mixes containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. TCC Materials® Underground Utility Mortars are designed to be compatible with the characteristics of the specified precast concrete structure or brick used in manhole and catch-basin construction. They are acceptable for the jointing of all types of underground precast concrete utility construction and laying concrete brick in manholes and catch basins. They may be used above or below grade when manufactured to the appropriate specification. BOM#103725 meets WI DOT specification 518.2.3 mortar proportion specification for WI DOT Stone & Pointing Mortars and also meets ASTM C387. BOM #105223 meets WI DOT specification 519.2.3 mortar proportion specification for WI DOT Catch Basin/Manhole Mortar as well as ASTM C387.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Underground Utility Mortar

SPEC MIX® Underground Utility Mortar (BOM #106516) is a dry, preblended, air-entrained mortar mix containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. This product meets ASTM C 270 and ASTM C 1714 requirements.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


 

 

SHARE