SAKRETE® 5000 Plus Concrete Mix
SAKRETE® 5000 Plus Concrete Mix (BOM #120020) is a professional grade concrete mix used for building and repairs greater than 2" depth.
SAKRETE® Ash Tray Sand (Black)
SAKRETE® Ash Tray Sand - Black (BOM #120017) is a non-flammable granular dry powder used to fill ashtray vestibules and containers used for extinguishing cigarettes and cigars. Economical to use, can be sifted to remove butts and ends. Ash Tray Sand will not burn.
SAKRETE® Ash Tray Sand (Off White)
SAKRETE® Ash Tray Sand - Off White (BOM #120016) is a non-flammable granular dry powder used to fill ashtray vestibules and containers used for extinguishing cigarettes and cigars. Economical to use, can be sifted to remove butts and ends. Ash Tray Sand will not burn.
SAKRETE® Blacktop Crack Filler
SAKRETE® Blacktop Crack Filler (BOM #120041 = Qt. / #120039 = Gal.) is used to fill cracks in blacktop up to 1/4 inch wide to help stop damaging water penetration. Ideal for repairs prior to sealing.
SAKRETE® Blacktop Repair Tube
SAKRETE® Blacktop Repair Tube (BOM #120040) is used for filling cracks in blacktop surfaces approximately 1/8 inch to 3/8 inch in width or less. Not for use in areas of prolonged contact with water. Weather resistant after curing.
SAKRETE® Concrete & Asphalt Cleaner
SAKRETE® Concrete & Asphalt Cleaner (BOM #120042) is a mild, acidic liquid used to clean concrete, masonry, and asphalt surfaces. Use to clean existing surfaces prior to making repairs.
SAKRETE® Concrete Bonder & Fortifier
SAKRETE® Concrete Bonder & Fortifier (BOM #120036) is a high-solids acrylic liquid bonding agent, used as a bonding admix or bonding agent enhance strength, durability, adhesion, abrasion resistance, and freeze-thaw resistance of concrete.
SAKRETE® Concrete Crack Filler
SAKRETE® Concrete Crack Filler (BOM #120026) is a flowable, polymer-based crack filler for concrete. This repair material is designed to fill and seal cracks in concrete up to 1/4 in. wide and 1/4 in. deep.
SAKRETE® Concrete Glue
SAKRETE® Concrete Glue (BOM #120033) is an acrylic cement modifier used as a surface primer or as a bonding additive to enhance strength, adhesion, abrasion resistance, and freeze-thaw resistance of concrete.
SAKRETE® Concrete Mortar Dissolver
SAKRETE® Concrete Mortar Dissolver (BOM #120043) is a safe, environmentally-friendly liquid alternative to aggressive acid concrete removers. Use to remove cured cement, concrete, mortar or stucco from most surfaces.
SAKRETE® Crack Resistant Concrete Mix
Formulated to reduce the risk of surface shrinkage cracks, Sakrete Crack Resistant Concrete Mix is a professional strength blend of cementitious materials, sands, stone and fibers. For repair and building jobs where concrete thickness exceeds 2”.
SAKRETE® Cure 'N Seal (WB)
SAKRETE® Cure 'N Seal (WB) (BOM #120045) is a clear, non-yellowing, waterborne, acrylic polymer modified resin compound used for curing, sealing, and hardening freshly placed concrete. Also used to seal, protect, and dustproof existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.
SAKRETE® Fast Setting Repair Mortar
SAKRETE® Fast Setting Repair Mortar (BOM #120371) is a fast-setting, high-strength patching material for both interior and exterior concrete surfaces. The convenient zip-pouch package is designed with the do-it-yourselfer in mind for smaller repair projects. Just add water and mix in the bag to create a workable mixture with excellent bonding characteristics. Trowel apply over existing concrete surfaces from a feather edge to ½" thickness to fix minor blemishes. Use for vertical, horizontal, and overhead repairs to pavement, curbs, steps, and more. Sakrete Repair Mortar can be shaved and sanded to shape. Sets up in 10-12 minutes.
SAKRETE® Fast Setting Cement Patcher
SAKRETE® Fast Setting Cement Patcher is used for horizontal, vertical, and overhead repairs where an accelerated set-time is needed. Use for applications of ½ inch featheredge. Fast Setting Cement Patcher is available in a 10 lb. pail (BOM #120379), a 50 lb. pail (BOM #120029), and a 10 lb. box (BOM #120028).
SAKRETE® Fast-Setting Concrete Mix
SAKRETE® Fast-Setting Concrete Mix (BOM #120019 = 50 lb. pail / #106576 = 50 lb. bag) sets posts and poles quickly and easily, even without blending the material. Sets in just ½ an hour so that no bracing is needed and exceeds the strength requirements of ASTM C 387. Fast-Setting Concrete Mix is intended for applications requiring at least 2 inches in thickness.
SAKRETE® Flo-Coat Concrete Resurfacer
SAKRETE® Flo-Coat Concrete Resurfacer (BOM #120034) is a polymer-modified sand and cement mix for resurfacing concrete from 1/8 inch to 1/4 inch depth. Can be applied in a flowable consistency using a squeegee or in a stiffer consistency using a trowel.
SAKRETE® Form Release Oil
SAKRETE® Form Release Oil (BOM #120044) is a release agent for use with concrete forms. Allows forms to be removed earlier and easier, yet has only a light residue.
SAKRETE® High Strength Concrete Mix
SAKRETE® High Strength Concrete Mix (BOM #100171 = 60 lb. bag / #120021 = 50 lb. pail) is designed for anchoring posts and poles, and pouring footings and slabs. High Strength Concrete Mix is premium quality for consistent strength and durability and meets ASTM C 387 strength requirements for structural applications. Uses include building walks, drives, slabs and steps as well as anchoring posts and poles. High Strength Concrete Mix is for applications requiring at least 2 inches in thickness. Just add water, mix, and use.
SAKRETE® Leak Stopper Hydraulic Cement
SAKRETE® Leak Stopper Hydraulic Cement (BOM #120030) stops the flow of water through breaks in concrete or masonry walls and floors. Rapid setting, with initial set-time of 1-3 minutes, and final set in 3-4 minutes.
SAKRETE® Mortar Mix Type N
SAKRETE® Mortar Mix Type N (BOM #100770) is a regular-strength, general-purpose mortar mix for laying brick, block and stone in wall construction or for repairing damaged mortar joints. Just add water, mix, and use.
SAKRETE® Mortar-Stucco Mix Type S
SAKRETE® Mortar-Stucco Mix Type S is a contractor-grade mortar mix for laying brick, block, and stone in load-bearing walls and construction above or below grade level. It can also be used as a scratch and brown coat in stucco application. Just add water, mix, and use. Available in 80 lb. bag (BOM #100531) and 50 lb. pail (BOM #120023)
SAKRETE® Non-Shrink Construction Grout
SAKRETE® Non-Shrink Construction Grout (BOM #120024) is a non-shrink, non-metallic, Portland cement based material with special additives designed with high flexural and compressive strength to handle high-load transfers. Used for grouting of machinery bases, bearing plates, pre-cast concrete, columns, beams and other anchoring applications.
SAKRETE® Non-Shrink General Purpose Grout
SAKRETE® Non-Shrink General Purpose Grout (BOM #120025) is a commercial grade non-metallic Portland cement based structural hydraulic cement for high-strength grouting.
SAKRETE® Portland Cement
SAKRETE® Portland Cement (BOM #120022) is a Type I-II gray cement. A basic building material, when blended with sand, stone or gravel it is used for pavement, sidewalks, slabs and more.
SAKRETE® Pourable Concrete Patch
SAKRETE® Pourable Concrete Patch (BOM #120037) is a flowable, squeegee-grade, polymer-modified mix for patching and resurfacing concrete up to ½ inch depth.
SAKRETE® Pre-Mixed Concrete Patch
SAKRETE® Pre-Mixed Concrete Patch (BOM #120547) is used for filling and sealing cracks in concrete up to 1 inch wide. Smooth minor surface defects and holes.
SAKRETE® Sand Mix
SAKRETE® Sand Mix (BOM #100397) is a quality mixture of sand and cement designed to be used as a topping mix to rejuvenate damaged concrete surfaces or as a bedding mix and joint grout for flagstone, slate, and brick walkways. Sand Mix can be applied in layers ranging from ½ to 2 inches thick and exceeds the strength requirements of ASTM C 387. Just add water, mix, and use.
SAKRETE® Self-Leveling Underlayment
SAKRETE® Self-Leveling Underlayment (BOM #120035) is a polymer-modified Portland cement based self-leveling underlayment for interior applications up to 1 inch in a single pour. For use over properly prepared concrete and plywood floors. Can be used under ceramic tile, stone, carpeting, VCT, wood flooring and other materials. Not designed as a direct wearing surface. May also be used to encapsulate radiant heating installations.
SAKRETE® Stone Veneer Mortar Mix
SAKRETE® Stone Veneer Mortar Mix (BOM #105167) is a polymer-modified contractor grade mortar specifically designed to adhere manufactured or artificial stones in vertical applications. Just add water and mix to use.
SAKRETE® Top 'n Bond Concrete Patcher
SAKRETE® Top 'n Bond Concrete Patcher (BOM #120031 = 10 lb. / #120032 = 50 lb.) is a polymer-modified sand-cement repair mortar for resurfacing, patching, and general concrete repairs from ½ inch to featheredge. Requires only the addition of water.
SAKRETE® Trowelable Blacktop Repair
SAKRETE® Trowelable Blacktop Repair (BOM #120038) is for filling and sealing cracks up to 1 in. wide in blacktop surfaces and for repairs to rough surfaces. Pre-mixed, use directly from the container.
SAKRETE® Fast Setting Self-Leveling Resurfacer
SAKRETE® Fast Setting Self-Leveling Resurfacer (BOM #120423) is a rapid setting cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for residential and light foot traffic industrial floors where a hard, flat, and smooth surface is desired. Applications from 1/8" to 1" and can be featheredged to adjoining elevations.
SAKRETE® Pro-X180 Rapid Strength Concrete Mix
SAKRETE® Pro-X180 Concrete Mix (BOM #110764) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprientary performance additives designed to provide extended working time and high early strength for concrete applications requiring a mininum thickness of 1-1/2". Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack-resistance and increased toughness.
SAKRETE® Self-Consolidating Concrete Mix
SAKRETE® Self-Consolidating Concrete Mix (BOM #110768) is a dry, preblended, one-component, self-consolidating, cementious, polymer-modified concrete mix containing coarse aggregate, silica fume, and an integral migrating corrosion inhibitor. Designed for application thickness minimum of 1" and maximum thickness of 8".
SAKRETE® High Heat Mortar
SAKRETE® High Heat Mortar (BOM #120996) is a dry, medium-duty mortar ideal for setting masonry units in fireplaces, fire pits, or chimney applications such as setting clay flue liners and parging a smoke chimney chamber. High heat resistance for appications up to 2550°F and excellent strength properties.
SAKRETE® Rapid Setting Anchoring Epoxy
SAKRETE® Rapid Setting Anchoring Epoxy (BOM #129428) is a two-component epoxy compound used to anchor bolts or other metal objects in concrete and masonry. A rapid setting material that can be used in vertical or horizontal applications. Its rapid set allows for use in walls with minimal run-out.
SAKRETE® High Strength Anchoring Epoxy
SAKRETE® High Strength Anchoring Epoxy (BOM #129427) is a two-component epoxy compound that cures to an exceptionally strong, hard product. This unique formulation provides an excellent balance of mixability and flow without run-out to allow for the fastening and anchoring of both vertical and horizontal fixtures into masonry.