Masonry Repair


SPEC MIX® Mortar

SPEC MIX® Portland Lime & Sand Mortar is a dry, preblended mortar mix containing Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX® Portland Lime & Sand mortar in Type N (BOM #101212), Type S (BOM #101013), Type M (BOM #101320), and Type O (BOM #107500). PCL Sand is also available with an Integral Water Repellant (IWR).

Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar - White

SPEC MIX® Portland Lime & Sand White Mortar is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX Portland Lime & Sand mortar in Type N (BOM #106425), Type S (BOM #106257), and Type O (BOM #108645). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR).

Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar (w/ Silica Sand) - White

SPEC MIX® Portland Lime & Sand White Mortar w/ Silica Sand is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried silica sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX Portland Lime & Sand mortar in Type N (BOM #107615), Type S (BOM #107134), and Type O (BOM #109740). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR).

Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.


TCC Materials® Masonry Cement

TCC Materials® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #100920) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM #100917) is designed for structural above-grade or below-grade application and comes in a 75 lb. bag. Type M Masonry Cement (BOM #100868) is used for structural, below-grade, load-bearing walls where higher compressive strengths are needed and comes in a 70 lb. bag.


QUIKRETE® Mortar Mix - Type N

QUIKRETE® Mortar Mix (BOM #100533) is a blend of masonry cement and graded sand, designed to meet ASTM C 270 for Type N Mortar. Just add water and mix to construct or repair block, brick, or stone structures like walls, pillars, barbecues, planters, and for tuck-pointing mortar joints.


SPEC MIX® Stone Veneer Mortar - Joint Grout

SPEC MIX® Stone Veneer Joint Grout (BOM #108404) is a blend of dry, cementitious materials, and masonry sand specifically designed to fill the joints between various precast, lightweight, masonry veneer systems. TCC Materials also offers SPEC MIX joint grout made with white cement and/or with integral color.

Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.


ProSpec® PVT Masonry Veneer Joint Grout

ProSpec® PVT Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and masonry sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. ProSpec Pro Veneer Technology (PVT) creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466).


TCC Materials® Masonry Joint Grout

TCC Materials® Masonry Joint Grout (BOM #103491) can be used to grout joint spaces in and between artificial stone, brick, masonry, and natural stone. It is a preblended mixture of dry cementitious materials and masonry sand that is designed to fill joints between masonry veneer systems. This product can be used for interior or exterior applications. The product is preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in 60 lb. (27.2 kg) bag.


Akona® Instant Water Stop

Akona® Instant Water Stop is a quick-setting, hydraulic cement compound used primarily as a water stop or hole filler on concrete or masonry materials. It is formulated to expand when set and locks into place to block flowing water within 3 to 5 minutes. Instant Water Stop bonds to wet walls and is ideal for patching cracks and leaks in swimming pools and is available in 10 lb. bags (BOM #102635) and 25 lb. bags (BOM #102636)


QUIKRETE® Surface Bonding Cement

QUIKRETE® Quikwall Surface Bonding Cement is an alkali-resistant, fiberglass-reinforced, Portland cement based, surface bonding cement used for construction of dry-stack (without mortar) cement block walls. Available in Gray (BOM #101359) and White (BOM #100246). Add color with QUIKRETE® Stucco & Mortar Color.


Akona® Crack-Resistant Surface Bonding Cement

Akona® Crack-Resistant Surface Bonding Cement (BOM #102614) is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete.


ProSpec® Surface Bonding Cement CR

ProSpec® Surface Bonding Cement CR is a versatile fiber-reinforced, Portland cement-based product used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, repair deteriorated stucco, and in the construction of concrete block walls that are dry stacked (without mortar) above the first course. Special fibers control shrinkage, cracking, and sagging on vertical applications and provides additional overall strength when compared with conventional concrete. Available in Gray (BOM #126197) and White (BOM #120881).


ProSpec® Refractory Mortar

ProSpec® Refractory Mortar is a specially-engineered blend of specific cements and aggregates giving the mortar unique heat-resistance and thermal characteristics for use in high-temperature applications such as inside fire pit rings, setting chimney clay flue liners, parging a smoke chimney chamber, and setting fire bricks. Passes ASTM C 199 for mortar temperature limits to 2,550°F for a minimum of 6 hours. Available in 50 lb. bags (BOM #120924) and 10 lb. pails (BOM #120913).


Akona® Refractory Mortar

Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQ's, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.


Akona® Mortar Repair

Akona® Commercial Grade Mortar Repair (BOM #103174) is designed for tuck-pointing, repairing, and sealing mortar joints and cracks in masonry units such as stone, brick and block walls. The product is gray in color and designed to blend in with the texture of surrounding mortar. Our durable, pre-mixed Mortar Repair is a sanded, acrylic formulation that dries quickly, is paintable, and provides superior adhesion to masonry.


Akonaseal® Polyurethane Masonry/Joint Sealant

Akonaseal™ Polyurethane Masonry/Joint Sealant (BOM #104561) has an updated package and name (previously called Polyurethane Construction Textured Sealant). A premium-grade, multi-purpose, moisture-cure sealant, designed to meet the flexibility requirements of dynamically moving cracks and joints, this texturized, gray mortar-colored sealant is ideally suited for vertical concrete, stucco or masonry applications with a maximum joint of 1"W x ½"D and can be painted with a latex paint when cured. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant.


 

 

SHARE