Repair & Restoration


Akonaflex® Pro Self-Leveling Expansion Joint Filler

Akonaflex™ Pro Self-Leveling Expansion Joint Filler is a superior-grade, one-component, urethane sealant and filler to be used in concrete joints as well as a wide variety of substrates. Its self-leveling characteristics provide a smooth finish which makes it ideal for filling cracks or gaps on horizontal surfaces such as concrete driveways, sidewalks, above ground foundations, patios, concrete steps, garage floors, and other concrete surfaces. Akonaflex Pro fills expansion joints up to 1½" W x 1"D. Can be exposed to water after only 2 hours under normal conditions without washing out. It will reach full cure after 24 hours. Does not crack or shrink and thus acts as an excellent waterproof seal. Available in 2 convenient sizes: 10 oz. tubes (BOM #104560); and 29 oz. tubes (BOM #120440).


Akonaflex® Self-Leveling Concrete Repair

Akonaflex™ Self-Leveling Concrete Repair is a one-component, construction-grade, polyurethane, moisture-cure sealant designed to meet the flexibility requirements of dynamically moving joints. Self-leveling to result in a smooth, gray finish which is foot-traffic ready after 3 days and will reach full cure in 1 week. Fills and seals horizontal joints up to 1"W x ½"D on concrete slabs, driveways, sidewalks, decks, pitch pans, pavers, garage floors, industrial floors and other concrete surfaces. Its premium-grade components give you a strong, durable, flexible, waterproof seal and leaves a finish that can be painted once cured with a latex paint. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant. Available in 2 convenient sizes: 10 oz. tubes (BOM #104562); and 29 oz. tubes (BOM #120456).


Akonakote® Pourable Concrete Patch

Akonakote™ Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.


Akonakote® Vertical Concrete Surface Finisher

Akonakote™ Vertical Concrete Surface Finisher is a superior cementitious coating for concrete and masonry. It provides a protective and waterproof surface while eliminating the rubbing process. Easily fill and seal pores, voids, and honecombing in concrete in one application. Can be trowel, spray, or brush applied. Also ideal for waterproofing swimming pools, cisterns, and water reservoirs. It is available in white (BOM #1993) and pearl gray (BOM #1994). Aslo avaialble in pearl gray trowl grade (#1989). Listed by MNDOT as a "Special Surface Finish System".


Akonaseal® Polyurethane Masonry/Joint Sealant

Akonaseal™ Polyurethane Masonry/Joint Sealant (BOM #104561) has an updated package and name (previously called Polyurethane Construction Textured Sealant). A premium-grade, multi-purpose, moisture-cure sealant, designed to meet the flexibility requirements of dynamically moving cracks and joints, this texturized, gray mortar-colored sealant is ideally suited for vertical concrete, stucco or masonry applications with a maximum joint of 1"W x ½"D and can be painted with a latex paint when cured. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant.


Akona® Concrete Bonding Additive

Akona® Concrete Bonding Additive is an acrylic cement modifier that dramatically improves strength, adhesion, abrasion resistance and freeze-thaw resistance and is ideally suited for use with sand, mortar, cement mixes and selected Akona Repair Products. Akona Concrete Bonding Additive produces a patch that will adhere to old concrete and provides the adhesion required for thin overlays. Available in 1 gallon bottles (BOM #102659) and 1 quart bottles (BOM #102658).


Akona® Concrete Repair

Akona® Commercial Grade Concrete Repair (BOM #103173) is a flexible, quick-drying, paintable filler and sealant for repairs to vertical and horizontal concrete, masonry, stone, and stucco surfaces. It's gray color and sanded texture is designed to blend in with most standard concrete surfaces.


Akona® Concrete/Masonry Restoration Cleaner

Akona® Concrete/Masonry Restoration Cleaner (BOM #102652) is a mild, acidic product that dissolves and removes efflorescence (white mineral deposits) and rust stains from concrete surfaces, masonry units, pavers, brick, etc. This product is recommended to be used before applying a sealer to the surface of concrete or masonry. This enables the sealer to penetrate and seal more effectively. Use this product before applying Akona Penetrating Paver & Masonry Sealer or Akona Water Based Concrete Sealer. In addition, Akona Surface Concrete Sealer may be used to prepare the surface of concrete or masonry prior to using Akona Repair Products.


Akona® Congelz™ Waste Water Hardener

Akona® Congelz™ Waste Water Hardener (BOM #107069) is the perfect method to dispose of unwanted rinse water from any cement or concrete project. Congelz patented technology is great for mortars, stuccos, grouts, patching products, and other similar materials. Using Congelz solves the issues caused by cementitious waste disposal - no more clogged drains or dumping of product on jobsites. Simply add the product to your rinse water, allow to harden, and toss the works in the trash! Environmentally safe! Passes EPA 9095.


Akona® Crack-Resistant Surface Bonding Cement

Akona® Crack-Resistant Surface Bonding Cement (BOM #102614) is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete.


Akona® Epoxy Crack Repair

Akona® Epoxy Crack Repair (BOM #120439) is a two-component, high-strength, 100% solids, epoxy repair product designed for injection into horizontal cracks in structural materials including concrete and bricks for the purpose of bonding and sealing. Special no-mess, self-mixing tube for easier application. Use to fill and bond narrow horizontal cracks up to 1/4" (6 mm) wide x 6" (150 mm) deep. Dries clear to light yellow color.


Akona® Foundation Coating Cement

Akona® Foundation Coating Cement (BOM #102621) is a specially-formulated, cement-based product for coating and protecting polystyrene insulation board or insulated concrete forms (ICF) from weathering, ultraviolet rays, and general wear/impact. Akona Foundation Coating Cement is polymer-modified and contains fibers which reduces shrinkage and improves the adhesion properties of the product. Akona Foundation Coating Cement is easy to apply by masonry brush or trowel and has the superior durability of a Portland cement-based product. It also provides a tough, durable gray textured or stucco-like finish. If desired, the product may be integrally colored with a liquid cement or mortar colorant, or it can be painted to match existing home design.


Akona® Heavy-Duty Waterproofing Base Coat

Akona® Heavy-Duty Waterproofing Base Coat (BOM #102624) is a Portland cement-based, waterproof coating for use over concrete, block, brick or stucco surfaces. Use for interior or exterior coating of foundation, basement or retaining walls below or above grade. When applied over non-uniform areas, this product provides a smooth or textured surface that can be left as a finished decorative coating. In addition, this product can serve as a base coat for paint or similar faux finishes.


Akona® Instant Anchoring Cement

Akona® Instant Anchoring Cement (BOM 102645) is a quick-setting, anchoring cement compound used for setting poles, railings, bolts and fixtures in concrete or masonry. Suitable for interior or exterior use, this product expands as it hardens to set securely and lock in place for strong support. Average set time=20 minutes


Akona® Instant Patching Cement

Akona® Instant Patching Cement (BOM 102632) is a high-performance cement used for filling wide cracks and other concrete repair needs. It sets rock hard in just 90 minutes. Akona Instant Patching Cement self-bonds to all properly-prepared concrete surfaces and develops twice the strength of ordinary concrete.


Akona® Instant Water Stop

Akona® Instant Water Stop is a quick-setting, hydraulic cement compound used primarily as a water stop or hole filler on concrete or masonry materials. Its formulated to expand when set and locks into place to block flowing water within 3 to 5 minutes. Instant Water Stop bonds to wet walls and is ideal for patching cracks and leaks in swimming pools and is available in 10 lb. bags (BOM #102635) and 25 lb. bags (BOM #102636)


Akona® Mortar Repair

Akona® Commercial Grade Mortar Repair (BOM #103174) is designed for tuck-pointing, repairing, and sealing mortar joints and cracks in masonry units such as stone, brick and block walls. The product is gray in color and designed to blend in with the texture of surrounding mortar. Our durable, pre-mixed Mortar Repair is a sanded, acrylic formulation that dries quickly, is paintable, and provides superior adhesion to masonry.


Akona® Polymer-Modified Concrete Resurfacer

Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength product has superior bond and is trowelable to from 1/4 in. down to 1/8 in. (6 to 3 mm). It may be trowel or broom finished, and is available in a 25 lb. bag (BOM #102642).


Akona® Pourable Gray Concrete Crack Filler

Akona® Gray Pourable Concrete Crack Filler is a ready-mixed, easy-to-apply, pourable material for filling cracks up to ¼" deep x ¼" wide. Gray in color to blend with concrete surfaces and flexible to conform to movements of active cracks, Concrete Crack Filler is ideal for horizontal concrete surface such as driveways, sidewalks, patios and garage floors. Available in 1 gal. bottles (BOM #102639) and 1 qt. bottles (BOM #102638). For larger cracks and holes, use Akona Vinyl Cement Patch.


Akona® Pre-Mixed Concrete Patch

Akona® Pre-Mixed Concrete Patch (BOM #103962) is a pre-mixed, water-based formula intended to patch minor cracks, holes and surface defects in concrete or masonry. Often used for re-applying small broken pieces of concrete or tuckpointing brick mortar joints, our Concrete Patch (BOM 103962) is durable, flexible and can be used for interior or exterior applications. This easy-to-apply formula offers superior adhesion and may be used for vertical or horizontal patches.


Akona® Premium Concrete Repair

Akona® Premium Concrete Repair (BOM #102637) is a quick-setting repair product ideally suited for vertical applications. This product combines the superior bonding and abrasion resistance of our polymer system with the strength of Portland cement. The result is a patch that is strong and durable. Quickly and easily fill chips in concrete steps, sidewalks, floors, and more. Also use to fill small holes in concrete or masonry.


Akona® Rapid Patch® Concrete Refinisher Pouch

Akona® Rapid Patch® Concrete Refinisher (BOM #104563) is a fast-setting patching material for concrete pavement, curbs, steps, block and all other interior or exterior concrete surfaces. The convenient zip-pouch package is designed with the do-it-yourselfer in mind for smaller repair projects. Just add water and mix in the bag to create a workable mixture with excellent bonding characteristics. Trowel apply over existing concrete surfaces from a feather edge to 2" thickness to fix minor blemishes. It can be shaved or molded to required shape. Use all the product at once, or take some out and save the rest for another project. And when you're done, our disposable, mix-in-the-bag package makes clean-up a breeze.


Akona® Rapid Patch® Concrete Refinisher

Akona® Rapid Patch® Concrete Refinisher (BOM #103145) is a heavy-duty, fast-setting patching material for concrete tilt-up panels, pre-cast concrete, concrete block, concrete pipe, and other concrete or masonry surfaces. This product is suitable for interior or exterior use. Just add water to create a workable, easy-to-apply mixture with excellent bonding characteristics. This product may be trowel applied over existing concrete surfaces from a feather-edge to 2" thickness to finish the appearance of concrete surfaces. It can be shaved or sanded to required shape. Its fast-setting characteristics made it ideal for vertical, horizontal, and overhead applications and when down time is critical.


Akona® Rapid Patch® Concrete Surface Repair

Akona® Rapid Patch® Concrete Surface Repair (BOM# 102896) is a high-strength, fast-setting, low-shrinkage patching material for commercial and industrial horizontal concrete surfaces. Concrete Surface Repair can also be used for concrete pavements, highway applications, concrete levelling and underlayments. Meets ASTM C928-R2. MN DOT approved under "Rapid Hardening Materials for Repairs".


Akona® Refractory Mortar

Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQs, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.


Akona® Vinyl Cement Patch

Akona® Vinyl Cement Patch is ideally suited for repairs to damaged concrete steps, sidewalks, driveways, patios, curbs, walls and floors. This product contains unique polymers that give it twice the strength and three times the adhesion of conventional concrete. Just add water and mix for an easy-to-use product which can be troweled to a feather edge on interior and exterior concrete applications. For resurfacing large areas, use Akona Polymer-Modified Concrete Resurfacer.


ProSpec® Air-Entrained Concrete Patching Mix AE

ProSpec® Air-Entrained Concrete Patching Mix AE (3U58M) (BOM #126199) is an ideal for repairing concrete pavement, bridge decks, industrial floors, concrete parking lots, and garage decks. This pre-blended mixture of cement, aggregate, and special additives will produce a high strength concrete repair material that is extremely durable and works well in harsh environments. Additionally, when used with ProSpec Fast-Set Liquid Activator, surfaces can be reopened to traffic within 4 to 5 hours under typical conditions.


ProSpec® Concrete Resurfacer

ProSpec® Concrete Resurfacer (BOM #120728) is a fast-setting, high-performance polymer-modified, cement-based product used for resurfacing old concrete to make it look new again. Applications from feather edge to ½ in. (2-13 mm). Fast-drying, walkable on average in 2 hours.


ProSpec® Moisture Barrier

ProSpec® Moisture Barrier (BOM #127610) is an advanced, latex, polymer-based technology used as a water-resistant membrane applied to all wood or moisture-sensitive backup walls prior to application of ProSpec Polymer-Modified Stone Veneer Base Coat. Ready to use (no mixing required), with exceptional flexibility and elongation, solvent free and VOC compliant, ProSpec Moisture Barrier is part of the ProSpec veneer stone installation system. Color will be light purple when applied, dries to dark purple.


ProSpec® Partial Depth Concrete Patch

ProSpec® Partial Depth Concrete Patch is is ideal for placing overlays less than 2” deep (5 cm). This pre-blended cement and oven dried sand mixture will produce a high-strength concrete repair material that is extremely durable in partial depth applications such as concrete pavements, bridge decks, industrial floors, concrete parking lots and garage decks. It is also used for adhering pavers to concrete steps and walks, patching and/or leveling concrete surfaces, filling large cracks, and filling cores in masonry block or brick. Available in 2:1 mix (BOM #120722), 2.5:1 mix (BOM #120723), or 3:1 mix (BOM #120724) (fine sand aggregate to Portland cement ratio).


ProSpec® Rapid Patch® Commercial DOT Repair

ProSpec® Rapid Patch® Commercial DOT Repair (BOM #100689) is a rapid-setting, high-strength, polymer-modified, one-component hydraulic cement mortar designed for concrete repair and overlay applications requiring high durability. Meets or exceeds ASTM C928-R3 Standard Specification for Packaged, Dry, Very Rapid, Hardening Cementitious Materials for Concrete Repair. Resistant to salts, grease, oil, and other chemicals often found in the transportation environment. ProSpec Rapid Patch Commercial DOT Repair is approved by MNDOT for "Rapid Hardening Materials for Repairs".


ProSpec® Rapid Patch® Horizontal Repair

ProSpec® Rapid Patch® Horizontal Repair (BOM #126173) is a high-strength, fast-setting, low shrinkage patching material for commercial and industrial concrete horizontal surfaces, as well as concrete pavements and highway applications. Approved by MNDOT under Rapid Hardening Materials for Repairs.


ProSpec® Rapid Patch® Vertical Repair

ProSpec® Rapid Patch® Vertical Repair (BOM #126171) is a non-slumping, high-strength, fast-setting, non-shrink, patching material for commercial and industrial vertical and overhead holes in concrete or masonry. Can be shaved or molded to required shapes. Initial set-time of 15 minutes. Maximum application thickness of 1-1/2 in. (38 mm) per layer.


ProSpec® Surface Bonding Cement CR

ProSpec® Surface Bonding Cement CR is a versatile fiber-reinforced, Portland cement-based product used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, repair deteriorated stucco, and in the construction of concrete block walls that are dry stacked (without mortar) above the first course. Special fibers control shrinkage, cracking, and sagging on vertical applications and provides additional overall strength when compared with conventional concrete. Available in Gray (BOM #126197) and White (BOM #120881).


ProSpec® Vertical Concrete Surface Finisher

ProSpec® Vertical Concrete Surface Finisher is a superior cementitious waterproofing coating for concrete and masonry. It provides a protective and waterproof surface while eliminating the rubbing process. Spray or brush applied, available in light gray (BOM 120765) or white (BOM 120764). For added performance, durability, and improved bonding, Vertical Concrete Surface Finisher is designed to be mixed with ProSpec Mighty Bond liquid additive. Vertical Concrete Surface Finisher when mixed with Mighty Bond is approved by MNDOT under Special Surface Finish System.


ProSpec® Vinyl Concrete Patch

ProSpec® Vinyl Concrete Patch (BOM #120681)a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather-edge to 2 in. (51 mm) thick per lift. Typically supports foot traffic in 8-12 hours, wheeled traffic in 48 hours.


ProSpec® Waterproofing & Crack Isolation Membrane

ProSpec® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gallon pail (BOM #120675), 3.5 gallon pail (BOM #127630), and 5 gallon (BOM #120676).


QUIKRETE® 5000 Concrete Mix

QUIKRETE® 5000 Concrete Mix (BOM #104624) is a commercial-grade blend of stone or gravel, sand and cement specially designed for higher early strength and ideal for cold weather application. Just add water, mix and use for concrete projects 2" thick or more such as driveway aprons, patios, deck supports, and sign footings. Achieves 5,000 psi after 28 days.


QUIKRETE® All-Purpose Gravel

QUIKRETE® All-Purpose Gravel (BOM #105521) is a multi-use product for a variety of decorative and landscaping applications. Also for making concrete.


QUIKRETE® All-Purpose Sand

QUIKRETE® All-Purpose Sand is a washed, properly graded coarse sand with multi-purpose uses. Meets ASTM C 33 specifications. Available in 50 lb. bags plain (BOM #108620) or dried (BOM #105755).


QUIKRETE® Building Form

The QUIK-TUBE® Building Form is a ridged fiber building form tube that eliminates the need to build wood forms. Quik-Tube Building Forms come in 4 ft. lengths are commonly used for columns, mailbox bases, and deck supports. Available in 16" diameter (BOM #105597), 12" diameter (BOM #101034), 10" diameter (BOM #109935), and 8" diameter (BOM #101108).


QUIKRETE® Color Additive

QUIKRETE® Color Additive is a liquid coloring agent used to customize the color of your concrete project. Mix with water and then add to dry concrete mix. One bottle will mix with two 80lb. or 60lb. bags of Concrete Mix. Available in Red (BOM #105510), Brown (BOM #105508), Buff (BOM #105509), Charcoal (BOM #105507), and Terra Cotta (BOM #107832).


QUIKRETE® Concrete Mix

QUIKRETE® Concrete Mix (BOM #100389) is the original 4,000 psi average compressive strength blend of Portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. Designed for pouring concrete 2" thick or more or building/repairing concrete structures. Available in 80 lb. bags (BOM #100389), 60 lb. bags (BOM #101356), and 40 lb. bags (BOM #104606). Approximate Yield: 80 lbs. = 0.60 cu. ft. 60 lbs. = 0.45 cu. ft.


QUIKRETE® Crack-Resistant Concrete Mix

QUIKRETE® Crack-Resistant Concrete Mix (BOM #109358) is a construction grade blend of Portland cement, sand, gravel & special reinforcing fibers to reduce shrinkage cracks and improve impact resistance. Just add water and mix to create for walkways, patios, steps, garage or shed floors.


QUIKRETE® Expansion Strips

QUIKRETE® Expansion Joint Strips (BOM #106868) are made from resilient wood fibers to prevent damage during expansion and contraction of concrete. These ½"x 4"x 5" weather-resistant strips are used between concrete slabs in driveways, sidewalks, and patios as well as to separate concrete from the structures they butt up to. Meets requirement of ASTM D 1751.


QUIKRETE® Fast-Setting Concrete Mix

QUIKRETE® Fast-Setting Concrete Mix (BOM #100166) is a special blend of fast-setting cements, sand and gravel designed to set hard in approx. 20 to 40 minutes. Sets posts without mixing. Pour dry mix into hole and soak with water. Use for setting fence posts, mailbox posts, basketball posts, deck posts, or lamp posts. Or use to construct new steps, sidewalks, or concrete appliance pads.


QUIKRETE® FastSet™ Repair Mortar

QUIKRETE® FastSet Repair Mortar (BOM #109719) is specifically formulated to make structural repairs to any concrete, masonry or stucco surface. This low-sag formula has a 20-30 minute working time which allows for sculpting of the material during placement and makes it ideal for vertical and overhead repairs. Just add water, mix, and use to repair concrete, masonry, or stucco surfaces. Exceeds ASTM C 928 R-2. Compressive strength ASTM C109 modified: 3 hours=2,000 psi, 24 hours=4,000 psi, 7 days=5,000 psi, and 28 days=6,000 psi.


QUIKRETE® Mason Mix

QUIKRETE® Mason Mix (BOM #106514) is a high strength Commercial Grade dry pre-blended mixture of sand and cements specially selected for masonry applications. Meets N, S, M requirements as specified in ASTM C270. Just add water. Also available in a 60 lb. bag (BOM #105673) at some locations.


QUIKRETE® Mortar Mix - Type N

QUIKRETE® Mortar Mix (BOM #100533) is a blend of masonry cement and graded sand, designed to meet ASTM C 270 for Type N Mortar. Just add water and mix to construct or repair block, brick, or stone structures like walls, pillars, barbecues, planters, and for tuck-pointing mortar joints.


QUIKRETE® Polyurethane Construction Adhesive

QUIKRETE® Polyurethane Construction Adhesive (BOM #102353) is a high-performance, construction-grade adhesive designed for permanently bonding concrete, brick, marble, stone, wood, glass, aluminum, steel, PVC and tile. Ideal for bonding retaining wall block and caps, repairing broken concrete, or adhering signage and other items to concrete.


QUIKRETE® Polyurethane Non-Sag Sealant

QUIKRETE® Polyurethane Non-Sag Sealant (BOM #102351) is a high-performance, construction-grade polyurethane sealant designed for vertical and overhead surfaces. The non-sag formula provides superior adhesion and flexibility and is ideal for filling and sealing cracks and expansion joints in concrete, stucco, or masonry or for sealing around window and door openings. Meets ASTM C 920, Type S, Grade NS.


QUIKRETE® Polyurethane Self-Leveling Sealant

QUIKRETE® Polyurethane Self-Leveling Sealant (BOM #102352) is a high-performance, construction-grade, polyurethane sealant used for sealing cracks and joints in horizontal concrete surfaces. This self-leveling formula provides superior adhesion, flexibility and durability and is ideal for sealing expansion joints and crack in concrete floors, driveways, patios, steps, basements, and pool decks. Meets ASTM C 920 Type S, Grade P, Class 25.


QUIKRETE® Sand Mix

QUIKRETE® Sand/Topping Mix (BOM #101231) consists of a uniformly-blended mixture of Portland cement, commercial-grade sands and other approved ingredients. Just add water and mix to repair or top damaged concrete surfaces less than 2" thick.


QUIKRETE® Surface Bonding Cement

QUIKRETE® Quikwall Surface Bonding Cement is an alkali-resistant, fiberglass-reinforced, Portland cement based, surface bonding cement used for construction of dry-stack (without mortar) cement block walls. Available in Gray (BOM #101359) and White (BOM #100246). Add color with QUIKRETE® Stucco & Mortar Color.


QUIKRETE® Vinyl Concrete Patcher

QUIKRETE® Vinyl Concrete Patcher is a multi-purpose concrete repair material with strong adhesive properties which trowels to a feather edge of 1/16" (1.6 mm) and is made of a special blend of exterior-grade vinyl resin, fine sand, and Portland cement. Just add water. Available in 40 lb. bags (BOM #100472), 20 lb. pails (BOM #100131), and 10 lb. pails (BOM #109334).


SAKRETE® Concrete Bonder & Fortifier

SAKRETE® Concrete Bonder & Fortifier (BOM #120036) is a high-solids acrylic liquid bonding agent, used as a bonding admix or bonding agent enhance strength, durability, adhesion, abrasion resistance, and freeze-thaw resistance of concrete.


SAKRETE® Fast Setting Cement Patcher

SAKRETE® Fast-Setting Cement Patcher is used for horizontal, vertical, and overhead repairs where an accelerated set-time is needed. Use for applications of 1/2 inch featheredge. Fast-Setting Cement Patcher is available in a 10 lb. pail (BOM #120379), a 50 lb. pail (BOM #120029), and a 10 lb. box (BOM #120028).


SAKRETE® Fast Setting Repair Mortar

SAKRETE® Fast Setting Repair Mortar (BOM #120371) is a fast-setting, high-strength patching material for both interior and exterior concrete surfaces. The convenient zip-pouch package is designed with the do-it-yourselfer in mind for smaller repair projects. Just add water and mix in the bag to create a workable mixture with excellent bonding characteristics. Trowel apply over existing concrete surfaces from a feather edge to ½" thickness to fix minor blemishes. Use for vertical, horizontal, and overhead repairs to pavement, curbs, steps, and more. Sakrete Repair Mortar can be shaved and sanded to shape. Sets up in 10-12 minutes.


SAKRETE® Fast-Setting Concrete Mix

SAKRETE® Fast-Setting Concrete Mix (BOM #120019 = 50 lb. pail / 106576 = 50 lb. bag) sets posts and poles quickly and easily, even without blending the material. Sets in just ½ an hour so that no bracing is needed and exceeds the strength requirements of ASTM C 387. Fast-Setting Concrete Mix is intended for applications requiring at least 2 inches in thickness.


SAKRETE® Flo-Coat Concrete Resurfacer

SAKRETE® Flo-Coat Concrete Resurfacer (BOM #120034) is a polymer-modified sand and cement mix for resurfacing concrete from 1/8 inch to 1/4 inch depth. Can be applied in a flowable consistency using a squeegee or in a stiffer consistency using a trowel.


SAKRETE® Leak Stopper Hydraulic Cement

SAKRETE® Leak Stopper Hydraulic Cement (BOM #120030) stops the flow of water through breaks in concrete or masonry walls and floors. Rapid setting, with initial set-time of 1-3 minutes, and final set in 3-4 minutes.


SAKRETE® Pourable Concrete Patch

SAKRETE® Pourable Concrete Patch (BOM #120037) is a flowable, squeegee-grade, polymer-modified mix for patching and resurfacing concrete up to 1/2 inch depth.


SAKRETE® Sand Mix

SAKRETE® Sand Mix (BOM #100397) is a quality mixture of sand and cement designed to be used as a topping mix to rejuvenate damaged concrete surfaces or as a bedding mix and joint grout for flagstone, slate, and brick walkways. Sand Mix can be applied in layers ranging from ½ to 2 inches thick and exceeds the strength requirements of ASTM C 387. Just add water, mix, and use.


SAKRETE® Top 'n Bond Concrete Patcher

SAKRETE® Top 'n Bond Concrete Patcher (BOM #120031 = 10 lb. / 120032 = 50 lb.) is a polymer-modified sand-cement repair mortar for resurfacing, patching, and general concrete repairs from 1/2 inch to featheredge. Requires only the addition of water.


SPEC MIX® Underground Utility Mortar

SPEC MIX® Underground Utility Mortar (BOM #106516) is a dry, preblended, air-entrained mortar mix containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. This product meets ASTM C 270 and ASTM C 1714 requirements. Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Underground Utility Mortar (WI DOT)

SPEC MIX® Underground Utility Mortars (WI DOT) are dry, preblended mortar mixes containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. TCC Materials® Underground Utility Mortars are designed to be compatible with the characteristics of the specified precast concrete structure or brick used in manhole and catch-basin construction. They are acceptable for the jointing of all types of underground precast concrete utility construction and laying concrete brick in manholes and catch basins. They may be used above or below grade when manufactured to the appropriate specification. BOM#103725 meets WI DOT specification 518.2.3 mortar proportion specification for WI DOT Stone & Pointing Mortars and also meets ASTM C387. BOM #105223 meets WI DOT specification 519.2.3 mortar proportion specification for WI DOT Catch Basin/Manhole Mortar as well as ASTM C387. Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


TCC Materials® Black Blast

TCC Materials® Black Blast (BOM #106908) are abrasive blasting crystals that can be used for rust/paint removal and cleaning stone and brick. Additionally, the crystals hard, sharp, evenly-sized crystals make them ideal to frost/etch glass. Black Blast crystals work with all blasting equipment, are safe to use, and have a 1.5-2.0 mil anchor profile.


TCC Materials® Iowa DOT Concrete Patch Mix

TCC Materials® Iowa DOT Concrete Patch Mix (BOM #104912) is a low-slump concrete primarily used for bridge deck overlays and concrete pavements. Produces a high-strength concrete repair material that is extremely durable and works well in harsh environments. Use for both full-depth and partial-depth applications.


TCC Materials® Masonry Cement

TCC Materials® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #100920) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM #100917) is designed for structural above-grade or below-grade application and comes in a 75 lb. bag. Type M Masonry Cement (BOM #100868) is used for structural, below-grade, load-bearing walls where higher compressive strengths are needed and comes in a 70 lb. bag.


TCC Materials® Masonry Joint Grout

TCC Materials® Masonry Joint Grout (BOM #103491) can be used to grout joint spaces in and between artificial stone, brick, masonry, and natural stone. It is a preblended mixture of dry cementitious materials and masonry sand that is designed to fill joints between masonry veneer systems. This product can be used for interior or exterior applications. The product is preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in 60 lb. (27.2 kg) bag


TCC Materials® Microsilica Concrete Patching Mix

TCC Materials® Microsilica Concrete Patching Mix (5098SP) is ideal for repairing parking structures, industrial plants, roads, walkways, bridges, tunnels, dams and ramps. This is a pre-blended cementitious mixture that produces a rapid strength gaining concrete repair material that is extremely durable and open to foot traffic in 2 hours or vehicular traffic in 4 hours.


TCC Materials® Rapid Patch® Commercial Asphalt Repair

TCC® Rapid Patch® Commercial Asphalt Repair (BOM #101856) is a commercial-grade patching material formulated for quickly repairing potholes and other defects in asphalt pavement. Asphalt Repair is a fast-setting repair product utilizing a specially selected combination of cements, admixtures, aggregates, and pigment which allows pavement to be opened to vehicular traffic within 3 hours of mixing the material. Rapid Patch Commercial Asphalt Repair is ideally suited when downtime is critical and when high early strength is required. Other benefits include no VOC, non oil-based, easy to mix & handle, and has excellent low-shrink, freeze/thaw, and salt-resistant properties. Can also be used with concrete.


TCC Materials® Silica Sand (4030) - Fine #40

TCC Silica Sand (Granusil 4030) is used for structural components in floor overlays, sports turf, and finish coat stucco. It has a consistently uniform shape, has excellent compaction & mechanical properties, and is resistant in high-traffic applications. Granusil #4030 Fine #40 is available in 50 lb. bags (BOM #100365).


TECH-MIX® Concrete Mix

TECH-MIX® Concrete Mix (BOM #104879) is a high strength pre-blended Portland cement mixture for pouring concrete 2 inches thick or greater. Used for general building and repairing steps, slabs, walks, and floors.


TECH-MIX® Crack-Resistant Concrete Mix

COMING SOON!! TECH-MIX® Crack-Resistant Concrete Mix (BOM #100463) is a high-strength, pre-blended Portland cement mixture for pouring concrete 2 (5 cm) thick or greater. Crack-Resistant Concrete Mix is air-entrained to increase freeze-thaw durability and fiber-reinforced to reduce shrinkage cracks and improve impact resistance. Meets or exceeds requirements of ASTM C387.


TECH-MIX® Fast-Setting Concrete Mix

TECH-MIX® Fast-Setting Concrete Mix (BOM #104877) is a specially formulated accelerated setting. high early strength mortar for use in applications of 2 inches thick or greater.


TECH-MIX® High-Strength 5000 Concrete Mix

TECH-MIX® High-Strength 5000 Concrete Mix (60 lb. BOM # 101122; 80 lb. BOM #104882) is a commercial grade blend of aggregate, sand, and Portland cement specifically designed for higher early strength. Ideal for cold-weather applications, it achieves 5000 psi after 28 days. Used for any application of 2 inches thick or greater.


TECH-MIX® Sand Topping Mix

TECH-MIX® Sand Topping Mix (BOM #104880) is a uniformly pre-blended Portland cement and sand mixture for placing concrete overlays 2 inches thick or less. Used for patching and leveling steps, slabs, walks, and floors.


 

 

SHARE