Rapid Patch®

Rapid Patch® Concrete Crack & Patch

Rapid Patch Concrete Crack & Patch is a heavy duty, fast-setting patching material for concrete block, sidewalks, patios, steps, and other concrete or masonry surfaces. This product is suitable for interior or exterior applications and may be trowel applied over existing concrete surfaces from a feather edge to a one half inch thickness to refinish the concrete surface.

Rapid Patch® Concrete Repair Mortar

Rapid Patch® Concrete Repair Mortar

Rapid Patch® Concrete Repair Mortar (20 lb. BOM #129460, 50 lb. BOM#129470) is a fast-setting, high-performance, multi-use blend of hydraulic cement, polymers, fine aggregates, and special additives used for concrete repair and new construction where high early strength, excellent durability, and low shrinkage is required. Mix with water for applications from ½ in. minimum to 6 in. maximum thickness (1.3-15 cm).

Rapid Patch® Feather Edge Pro

Rapid Patch® Feather Edge Pro (BOM #129490) is a trowelable, rapid-setting, Portland cement-based, polymer-modified, patch and skim coating compound for use on multiple substrates. This specially formulated, non-sanded product results in an ultra-smooth finish and can be applied from feather edge to ½ in. (13 mm) and is ideal for use as an embossing leveler.

Rapid Patch® FlexCrete

Rapid Patch® FlexCrete

Rapid Patch FlexCrete is a single component, polymer modified, Portland Cement based waterproofing mortar for use in applications where a flexible, durable watertight barrier is required. Flexcrete is designed to bond to concrete and masonry surfaces, is resistant to freeze thaw conditions and chemical and sulfate exposure.

Rapid Patch® Hairline Crack Repair

Rapid Patch® Hairline Crack Repair

Rapid Patch Hairline Crack Repair is a two-component, low-viscosity, 100% solids, urethane repair product designed for filling cracks in structural materials including concrete and bricks, for the purpose of bonding and sealing them. Product goes on black and dries gray. Designed for filling narrow cracks with maximum width of ¼ in. (6 mm) to a maximum depth of 6 in. (150 mm).

Rapid Patch® Moldable Concrete Repair

Rapid Patch® Moldable Concrete Repair is a fast setting, general purpose cement-based patching material for repairing concrete and masonry. Moldable Concrete Repair is a proprietary blend of Portland cements, aggregate and additives that achieve an initial set in 10-15 minutes; final set in 20-25 minutes. It can be shaved down for a more uniform looking repair after the initial set. Primary applications include drive-ways, walkways, stairs, patios, pool decks, basement floors and garage floors.

Rapid Patch® Multi-Purpose Repair

Rapid Patch® Multi-Purpose Repair (20 lb. BOM #129440, 50 lb. BOM #129450) is a fast-setting, high-performance, multi-use blend of hydraulic cement, fine aggregates, and special additives used for concrete repair and new construction, including casting, anchoring, grouting, and wet environments. Adheres to concrete, stone, masonry, and stucco. Mix with water for applications from feather-edge to 4 in. (10 cm).

Rapid Patch Rapid Loc Concrete & Veneer Bond

Rapid Patch® Rapid Loc Concrete & Veneer Bond

Rapid Patch® Rapid Loc™ Concrete & Veneer Bond is an innovative high-grab sealant which has high initial tack to hold materials in place while the adhesive cures, specifically designed for adhering stone, ceramic tile, and other construction materials to vertical surfaces. Rapid Loc Concrete & Veneer Bond is based on silyl-modified polymer technology that cures on exposure to atmospheric moisture to form a fast, tough, durable adhesive. Rapid Loc Concrete & Veneer Bond exhibits excellent adhesive properties to most common substrates including stone, brick veneer, aluminum, brass, vinyl, steel, stainless steel, glass, mirrors, mortar, concrete, wood, OSB, plywood, ceramic tile, brick, foam board, pavers, painted surfaces, fiberglass, and many plastics. Rapid Loc Concrete & Veneer Bond is highly weather resistant, remains flexible in low temperature extremes, and can be painted with most paints. Available in 9.5 oz. tube (BOM #130170).

Rapid Patch® Self-Leveling Resurfacer

Rapid Patch Self-Leveling Resurfacer (BOM #103145) is a cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for light industrial floors where a hard, flat smooth surface and a quick return to service is desired. Also use as an underlayment for installation of ceramic tile, stone, resilient flooring, carpet, or other finished flooring. Typical substrates include: fully cured concrete, APA rated exterior grade/exposure 1 plywood or OSB underlayment grade equivalent with expanded wire lath reinforcement. Install from feather edge to 2 in. (50 mm) thick.


Rapid Patch® by TCC Materials offers a variety of specially-blended, high-performing cementitious products that reach initial set in just 15 minutes. Each product is specifically designed for unique applications from floor preparation to multipurpose repairs and more.