Quikrete®

Quikrete® 5000 Concrete Mix

Quikrete® 5000 Concrete Mix (BOM #104624) is a commercial-grade blend of stone or gravel, sand and cement specially designed for higher early strength and ideal for cold weather application. Just add water, mix and use for concrete projects 2" thick or more such as driveway aprons, patios, deck supports, and sign footings. Achieves 5,000 psi after 28 days.

Quikrete® All-Purpose Gravel

Quikrete® All-Purpose Gravel (BOM #105521) is a multi-use product for a variety of decorative and landscaping applications. Also for making concrete.

Quikrete® All-Purpose Sand

Quikrete® All-Purpose Sand is a washed, properly graded coarse sand with multi-purpose uses. Meets ASTM C 33 specifications. Available in 50 lb. bags plain (BOM #108620) or dried (BOM #105755).

Quikrete® Black Top Patch

Quikrete® High Performance Blacktop Patch (BOM #109958) is a specifically-formulated, commercial-grade, asphalt cold-patch material for repairing potholes and cracks over 1" (25.4 mm) wide in asphalt pavements. It is suitable for use on roads, driveways, parking lots, and walkways. All-season formulation is suitable for making permanent repairs in wet or dry conditions.

Quikrete® Color Additive

Quikrete® Color Additive is a liquid coloring agent used to customize the color of your concrete project. Mix with water and then add to dry concrete mix. One bottle will mix with two 80 lb. or 60 lb. bags of Concrete Mix. Available in Red (BOM #105510), Brown (BOM #105508), Buff (BOM #105509), Charcoal (BOM #105507), and Terra Cotta (BOM #107832).

Quikrete® Concrete Mix

Quikrete® Concrete Mix (BOM #100389) is the original 4,000 psi average compressive strength blend of Portland cement, sand, and gravel or stone. Just add water. Use for any general concrete work. Designed for pouring concrete 2" thick or more or building/repairing concrete structures. Available in 80 lb. bags (BOM #100389), 60 lb. bags (BOM #101356), and 40 lb. bags (BOM #104606). Approximate Yield: 80 lbs. = 0.60 cu. ft. 60 lbs. = 0.45 cu. ft.

Quikrete® Crack-Resistant Concrete Mix

Quikrete® Crack-Resistant Concrete Mix (BOM #109358) is a construction grade blend of Portland cement, sand, gravel & special reinforcing fibers to reduce shrinkage cracks and improve impact resistance. Just add water and mix to create for walkways, patios, steps, garage or shed floors.

Quikrete® Expansion Strips

Quikrete® Expansion Joint Strips (BOM #106868) are made from resilient wood fibers to prevent damage during expansion and contraction of concrete. These ½"x 4"x 60" weather-resistant strips are used between concrete slabs in driveways, sidewalks, and patios as well as to separate concrete from the structures they butt up to. Meets requirement of ASTM D 1751.

Quikrete® Fast-Setting Concrete Mix

Quikrete® Fast-Setting Concrete Mix (BOM #100166) is a special blend of fast-setting cements, sand and gravel designed to set hard in approx. 20 to 40 minutes. Sets posts without mixing. Pour dry mix into hole and soak with water. Use for setting fence posts, mailbox posts, basketball posts, deck posts, or lamp posts. Or use to construct new steps, sidewalks, or concrete appliance pads.

Quikrete® FastSet All-Crete

FastSet™ All-Crete™ is a dual-purpose product. As a non-metallic fluid grout meeting ASTM C1107, it is used for anchoring and grouting of anchor bolts, retrofitted reinforcing steel, steel column bases, bearing plates, precast concrete key ways and other installations that require high early and high ultimate strength. Non-shrink characteristics make it stable and capable of handling load transfers. As a repair material, the product meets ASTM C928 R3 and is used to make partial depth or full depth repairs to roads, bridges, industrial floors and other concrete surfaces. Available in 20 lb. pails (BOM #113202) and 55 lb. bags (BOM #113203).

Quikrete® Fast Set Non-Shrink Grout

Quikrete® FastSet Non-Shrink Grout (BOM #109718) is designed for structural concrete repairs from ¼" to 24" deep and features a 30-minute set time, non-shrink characteristics and rapid strength gain. It can be mixed to a plastic, flowable or fluid consistency. Use for anchoring and grouting anchor bolts, bearing plates, pre-cast concrete keyways, or steel column bases. At a fluid consistency the compressive strength ASTM C109 reaches 2000 psi at 3 hours, 4000 psi at 24 hours, 5000 psi at 7 days, and 6500 psi at 28 days. At a flowable consistency the compressive strength ASTM C109 reaches 2500 psi at 3 hours, 4500 psi at 24 hours, 5500 psi at 7 days and 7500 at 28 days. At a plastic consistency the compressive strength reaches 3000 psi at 3 hours, 5000 psi at 24 hours, 6000 psi at 7 days and 8000 at 28 days. Exceeds ASTM C 928 R-3 and ASTM C 1107.

Quikrete® FastSet Repair Mortar

FastSet™ Repair Mortar demonstrates low sag, making it ideal for vertical or overhead repairs. FastSet™ Repair Mortar is also available with integral corrosion inhibitor in cases where maximum corrosion protection is desired. The addition of corrosion inhibitor has no adverse effect on the other physical properties of the product. This product can be built up […]

Quikrete® FastSet Self-Leveling Floor Resurfacer

High Performance Cement FastSet™ Self-Leveling Floor Resurfacer (BOM #110439) is a self-finishing interior & exterior floor topping and underlayment specially formulated to work without troweling. High Performance Cement FastSet™ Self-Leveling Floor Resurfacer produces a smooth surface ready for the installation of ceramic tile, resilient flooring, carpet or other finishes. FastSet™ Self-Leveling Floor Resurfacer can also be used as a wear surface for light duty industrial floors. Following are typical substrates: • Precast concrete plank • New concrete floor slabs with unacceptable finishes • Existing concrete floors with damaged finishes • Over wood floor systems, utilizing expanded metal lath reinforcement • FastSet™ Self-Leveling Floor Resurfacer may be used for outdoor service

Quikrete® Glass Block Mortar

Quikrete® Glass Block Mortar (BOM #100710) is a specifically formulated blend of white sand, cement, lime and other waterproof additives designed to provide a decorative, waterproof joint. Exceeds the performance requirements of ASTM C270 for Type S Mortar. Just add water.

Quikrete® Mason Mix

Quikrete® Mason Mix (BOM #106514) is a high strength Commercial Grade dry pre-blended mixture of sand and cements specially selected for masonry applications. Meets N, S, M requirements as specified in ASTM C270. Just add water. Also available in a 60 lb. bag (BOM #105673) at some locations.

Quikrete® Mason Sand

Quikrete® Mason Sand (BOM #108572) is a fine, dried sand used as a component in masonry mortar when mixed with masonry cement type N, M, S, or O. Masonry sand can also be used for many other applications where a fine sand is necessary.

Quikrete® Mortar Mix – Type N

Quikrete® Mortar Mix (BOM #100533) is a blend of masonry cement and graded sand, designed to meet ASTM C 270 for Type N Mortar. Just add water and mix to construct or repair block, brick, or stone structures like walls, pillars, barbecues, planters, and for tuck-pointing mortar joints.

Quikrete® Play Sand

Quikrete® Premium Play Sand® (BOM #101043) is a specially-graded, washed sand that has been dried and screened, for children’s sand boxes.

Quikrete® Polyurethane Construction Adhesive

Quikrete® Polyurethane Construction Adhesive (BOM #102353) is a high-performance, construction-grade adhesive designed for permanently bonding concrete, brick, marble, stone, wood, glass, aluminum, steel, PVC and tile. Ideal for bonding retaining wall block and caps, repairing broken concrete, or adhering signage and other items to concrete.

Quikrete® Polyurethane Non-Sag Sealant

Quikrete® Polyurethane Non-Sag Sealant (BOM #102351) is a high-performance, construction-grade polyurethane sealant designed for vertical and overhead surfaces. The non-sag formula provides superior adhesion and flexibility and is ideal for filling and sealing cracks and expansion joints in concrete, stucco, or masonry or for sealing around window and door openings. Meets ASTM C 920, Type S, Grade NS.

Quikrete® Polyurethane Self-Leveling Sealant

Quikrete® Polyurethane Self-Leveling Sealant (BOM #102352) is a high-performance, construction-grade, polyurethane sealant used for sealing cracks and joints in horizontal concrete surfaces. This self-leveling formula provides superior adhesion, flexibility and durability and is ideal for sealing expansion joints and crack in concrete floors, driveways, patios, steps, basements, and pool decks. Meets ASTM C 920 Type S, Grade P, Class 25.

Quikrete® Precision Non-Shrink Grout

Quikrete® Non-Shrink Precision Grout (BOM #100713) is a high-strength, non-metallic grout designed for precision grouting and general construction applications. Simply add water and mix to obtain flowable properties and high strengths. Its non-shrink characteristics make it stable and capable of handling high load transfers. This grout can be mixed to a plastic, flowable or fluid consistency to for grouting pre-cast concrete, heavy equipment, bearing plates, steel columns, and anchoring applications. At 28 days the compressive strengths reach 14,000 psi at a plastic consistency, 12,000 psi at a flowable consistency, and 8000 psi at a fluid consistency. Complies with ASTM C1107 and Army Corp of Engineers CRD 621.

Quikrete® Re-Cap Concrete Resurfacer

Quikrete® Re-Cap™ Concrete Resurfacer (BOM #112421) is a special blend of portland cement, sand, polymer modifiers and other additives. Designed to provide a shrinkage compensated repair material for making thin repairs to sound concrete in need of surface renewal. Can be squeegee, trowel or brush applied.

Quikrete® Sand Mix

Quikrete® Sand/Topping Mix (BOM #101231) consists of a uniformly-blended mixture of Portland cement, commercial-grade sands and other approved ingredients. Just add water and mix to repair or top damaged concrete surfaces less than 2" thick.

Quikrete® Stucco Base Coat – Scratch & Brown

Quikrete® Scratch and Brown Base Coat Stucco (BOM #103191) is a Portland cement-based stucco designed to be used as the scratch and/or brown coat in a 3-coat stucco application, or the first coat in a 2-coat application.  

Quikrete® Stucco Base – Pump Grade

Quikrete® Base Coat Stucco - Pump Grade is a Portland cement based stucco, designed to be used as the scratch and/or brown coat in a 3-coat stucco application, or the first coat in a 2-coat application. This product contains special additives which prevent premature loss of mixing water and provide increased workability. This product is intended for use over galvanized expanded metal lath or solid bases such as masonry, cast-in-place or precast concrete. Available in 80# bags (BOM #104298) and 3000# bulk bags (BOM #104346).

Quikrete® Stucco Finish Coat

Quikrete® Stucco Finish Coat White (BOM #100678) is a Portland cement based stucco finishing plaster designed for use as the color and texture coat over Portland cement base coat or fiberglass reinforced stucco. Requires only the addition of water.

Quikrete® Surface Bonding Cement

Quikrete® Quikwall Surface Bonding Cement is an alkali-resistant, fiberglass-reinforced, Portland cement based, surface bonding cement used for construction of dry-stack (without mortar) cement block walls. Available in Gray (BOM #101359) and White (BOM #100246). Add color with Quikrete® Stucco & Mortar Color.

Quikrete® Vinyl Concrete Patcher

Quikrete® Vinyl Concrete Patcher is a multi-purpose concrete repair material with strong adhesive properties which trowels to a feather edge of 1/16" (1.6 mm) and is made of a special blend of exterior-grade vinyl resin, fine sand, and Portland cement. Just add water. Available in 40 lb. bags (BOM #100472), 20 lb. pails (BOM #100131), and 10 lb. pails (BOM #109334).