Stone Veneer Mortars


SPEC MIX® Stone Veneer Mortar - Scratch Base

SPEC MIX® Scratch & Base Mortar (BOM #108540) is a blend of dry, cementitious materials and masonry sand specifically designed for superior bond and durability. Use SPEC MIX Scratch & Base as a base coat for attaching precast, lightweight masonry units over wood and lath, concrete or masonry substrates. TCC Materials also offers SPEC MIX Scratch & Base with integral color.

Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Building Stone Mortar

SPEC MIX® Building Stone Mortar is specially designed for masonry building masonry walls with full depth stone units. Whether the specification calls for soft or hard stone, Building Stone mortar mix is engineered to match the specific properties of each stone to increase the mortar-to-stone bond strength while allowing the mason to lay more stone every day. This product meets ASTM C 270.

Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Adhered Veneer Mortar

SPEC MIX® Adhered Veneer Mortar (AVM) is a blend of dry cementitious materials and masonry sand specifically designed to provide superior bond for precast, lightweight masonry veneer units to base surfaces, and is also offered with integral color. TCC Materials offers Adhered Veneer Mortar in Type N (BOM #109302) and Type S (BOM #109454) This product meets ASTM C270 and ASTM C 1714, and CSA A 179 for Type S mortar including ACI 530 shear strength requirements.

Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Polymer-Modified Adhered Veneer Mortar

SPEC MIX® Polymer Modified Adhered Veneer Mortar (PMAVM) (BOM #103592) is a blend of dry cementitious materials, masonry sand and performance admixtures specifically designed to provide superior bond for adhered manufactured and natural thin stone as well as brick veneer units. PMAVM is designed to provide excellent workability, cohesion, high bond strength, sag resistance, water resistance, efflorescence minimization, and durability. This product meets the requirements of ASTM C 270 and ASTM C 1714 for Type S mortars including ANSI A118.4 and ACI 530 shear bond standards. TCC Materials also offers PMAVM with integral color.

Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stone Veneer Mortar - Joint Grout

SPEC MIX® Stone Veneer Joint Grout (BOM #108404) is a blend of dry, cementitious materials, and masonry sand specifically designed to fill the joints between various precast, lightweight, masonry veneer systems. TCC Materials also offers SPEC MIX joint grout made with white cement and/or with integral color.

Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.


ProSpec® Polymer-Modified Stone Veneer Base Coat

ProSpec® Polymer-Modified Stone Veneer Base Coat (BOM #120442) is used as a scratch and base coat for real or manufactured stone veneer units. Also referred to as a cement plaster coating, it is a blend of cementitious materials, oven-dried masonry sand, and special performance admixtures designed to produce a highly-bondable substrate and to optimize consistency between batches. Special admixtures help create both a mechanical and chemical bond to the substrate with excellent workability and non-sag performance. Polymer-modified, mix with water only. "Step 1" of the ProSpec stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Can be applied over ProSpec Moisture Barrier or directly to fully cured concrete.


ProSpec® Heavy-Duty Stone Veneer Mortar

ProSpec® Heavy-Duty Stone Veneer Mortar (BOM #120444) is a high-yield, lightweight, high-performance, polymer-modified, fiber-reinforced, Portland-cement based mortar for adhered installation of masonry veneer stone and natural stone. 25% lighter than traditional mortars with excellent non-sag and non-slump handling characteristics. Special admixtures help create both a mechanical and chemical bond to the substrate, significantly outperforming standard mortars. ProSpec Heavy-Duty Stone Veneer Mortar is "Step 2" of the ProSpec stone installation system used to create decorative exterior and non-load bearing interior veneer walls.


ProSpec® Stone Veneer Joint Grout

ProSpec® Stone Veneer Joint Grout is a mixture of dry cementitious materials and masonry sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water only. "Step 3" of the ProSpec stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Available in 4 colors to compliment or contrast veneer units: Gray (BOM #120446); Brown (BOM #120449); Tan (BOM #120448); and White (BOM #120447).


ProSpec® PVT Masonry Veneer Mortar

ProSpec® PVT Masonry Veneer Mortar (BOM #120461) is a high-performance, multi-purpose, polymer-modified mortar, used for both traditional thick bed scratch and base coats and as the bonding mortar for installing real or manufactured masonry veneer units. A blend of cementitious materials, oven-dried masonry sand, and special performance admixtures, our Pro Veneer Technology (PVT) creates both a mechanical and chemical bond to the substrate, significantly outperforming standard Type S and N mortars. Can also be used for grouting, yet is excellent for applications such as dry stack where mortar joints are not used. Meets the requirements of ASTM C 1714, ASTM C270, ANSI 118.4, and ACI 530 Shear Bond Standards.


ProSpec® PVT Masonry Veneer Mortar HB

ProSpec® PVT Masonry Veneer Mortar HB (High-Bond) (BOM #120462) is a high-performance, non-sag, fiber-reinforced, polymer-modified bonding mortar for installing real or manufactured masonry veneer units. Our Pro Veneer Technology (PVT) is a blend of cementitious materials, oven-dried masonry sand, and special performance admixtures to create a professional strength mortar. This high-yield mortar allows for the same coverage as a traditional 50 lb. bag in a lighter-weight 40 lb. size. Meets or exceeds the requirements of ANSI A118.4, A118.11, A118.15 and ASTM C270.


ProSpec® PVT Masonry Veneer Joint Grout

ProSpec® PVT Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and masonry sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. ProSpec Pro Veneer Technology (PVT) creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466).


SAKRETE® Stone Veneer Mortar Mix

SAKRETE® Stone Veneer Mortar Mix (BOM #105167) is a polymer-modified contractor grade mortar specifically designed to adhere manufactured or artificial stones in vertical applications. Just add water and mix to use.


TCC Materials® Stone Mortar Mix

TCC Materials® Stone Mortar Mix (BOM #109043) is a specially formulated product for use in applying precast masonry veneer, thin natural stone veneer or thin brick units to base surfaces. This versatile product may be used as an initial base coat for your project, then can be used in applying masonry veneer to the substrate. The material is factory blended to ensure bond strength, workability and consistency. To mix, just add water. Follow the stone installation instructions provided by the manufacturer. Available in a 60 lb. (27.2 kg) bag.


ProSpec® Moisture Barrier

ProSpec® Moisture Barrier (BOM #127610) is an advanced, latex, polymer-based technology used as a water-resistant membrane applied to all wood or moisture-sensitive backup walls prior to application of ProSpec Polymer-Modified Stone Veneer Base Coat. Ready to use (no mixing required), with exceptional flexibility and elongation, solvent free and VOC compliant, ProSpec Moisture Barrier is part of the ProSpec veneer stone installation system. Color will be light purple when applied, dries to dark purple.


ProSpec® Stone Veneer Sealant

ProSpec® Stone Veneer Sealant is a one-component, high-performance, non-priming, gun-grade, polyurethane elastomeric sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry.  Available in 4 colors to coordinate with ProSpec Stone Veneer Grout: Gray (BOM #120450); Brown (BOM #120453); Tan (BOM #120452); and White (BOM #120451).


ProSpec® Waterproofing & Crack Isolation Membrane

ProSpec® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675), 3.5 gal. pail (BOM #127630), and 5 gal. (BOM #120676).


 

 

SHARE