Mortars


SPEC MIX® Mortar

SPEC MIX® Portland Lime & Sand Mortar is a dry, preblended mortar mix containing Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX® Portland Lime & Sand mortar in Type N (BOM #101212), Type S (BOM #101013), Type M (BOM #101320), and Type O (BOM #107500). PCL Sand is also available with an Integral Water Repellant (IWR).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar - Colored

SPEC MIX® Portland Lime & Sand with Color is a dry, preblended mortar mix containing Portland cement, hydrated lime, dried masonry sand and color pigment formulated for superior bond, workability and board life. This product meets ASTM C270 and ASTM C1714 requirements. TCC Materials offers SPEC MIX® Portland Lime & Sand mortar with color in Type N, Type S, and Type M. PCL Sand with color is also available with an Integral Water Repellant (IWR).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar - White

SPEC MIX® Portland Lime & Sand White Mortar is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX Portland Lime & Sand mortar in Type N (BOM #106425), Type S (BOM #106257), and Type O (BOM #108645). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar (w/ Silica Sand) - White

SPEC MIX® Portland Lime & Sand White Mortar w/ Silica Sand is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried silica sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX Portland Lime & Sand mortar in Type N (BOM #107615), Type S (BOM #107134), and Type O (BOM #109740). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Mortar w/ Integral Water Repellant

SPEC MIX® IWR (Integral Water Repellent) Mortar is a dry, preblended mortar mix containing Portland cement and hydrated lime, mortar cement or masonry cement with dried masonry sand and water repellant admixture formulated for water repellency, superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. SPEC MIX IWR (Integral Water Repellent) Mortar is available in Type N, S, and M and can also be ordered with integral color.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Set Accelerated Mortar

SPEC MIX® Set Accelerated Mortar is a dry preblended mortar mix containing Portland cement, hydrated lime or masonry Cement or mortar cement, dried masonry sand, and set accelerating admixtures formulated for faster set times in cold weather while maintaining superior bond, water retention and board life. This product meets ASTM C 270, ASTM C 1384 and ASTM C 1714 requirements. TCC Materials offers Set Accelerated Mortar in Type S (BOM #103757). Other types are available upon request.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Underground Utility Mortar

SPEC MIX® Underground Utility Mortar (BOM #106516) is a dry, preblended, air-entrained mortar mix containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. This product meets ASTM C 270 and ASTM C 1714 requirements.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Underground Utility Mortar (WI DOT)

SPEC MIX® Underground Utility Mortars (WI DOT) are dry, preblended mortar mixes containing Portland cement, hydrated lime, and dried masonry sand formulated for superior bond and outstanding freeze-thaw resistance in all underground precast concrete structure applications. TCC Materials® Underground Utility Mortars are designed to be compatible with the characteristics of the specified precast concrete structure or brick used in manhole and catch-basin construction. They are acceptable for the jointing of all types of underground precast concrete utility construction and laying concrete brick in manholes and catch basins. They may be used above or below grade when manufactured to the appropriate specification. BOM#103725 meets WI DOT specification 518.2.3 mortar proportion specification for WI DOT Stone & Pointing Mortars and also meets ASTM C387. BOM #105223 meets WI DOT specification 519.2.3 mortar proportion specification for WI DOT Catch Basin/Manhole Mortar as well as ASTM C387.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stone Veneer Mortar - Scratch Base

SPEC MIX® Scratch & Base Mortar (BOM #108540) is a blend of dry, cementitious materials and masonry sand specifically designed for superior bond and durability. Use SPEC MIX Scratch & Base as a base coat for attaching precast, lightweight masonry units over wood and lath, concrete or masonry substrates. TCC Materials also offers SPEC MIX Scratch & Base with integral color.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Building Stone Mortar

SPEC MIX® Building Stone Mortar is specially designed for masonry building masonry walls with full depth stone units. Whether the specification calls for soft or hard stone, Building Stone mortar mix is engineered to match the specific properties of each stone to increase the mortar-to-stone bond strength while allowing the mason to lay more stone every day. This product meets ASTM C 270.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Adhered Veneer Mortar

SPEC MIX® Adhered Veneer Mortar (AVM) is a blend of dry cementitious materials and masonry sand specifically designed to provide superior bond for precast, lightweight masonry veneer units to base surfaces, and is also offered with integral color. TCC Materials offers Adhered Veneer Mortar in Type N (BOM #109302) and Type S (BOM #109454) This product meets ASTM C270 and ASTM C 1714, and CSA A 179 for Type S mortar including ACI 530 shear strength requirments.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Polymer-Modified Adhered Veneer Mortar

SPEC MIX® Polymer Modified Adhered Veneer Mortar (PMAVM) (BOM #103592) is a blend of dry cementitious materials, masonry sand and performance admixtures specifically designed to provide superior bond for adhered manufactured and natural thin stone as well as brick veneer units. PMAVM is designed to provide excellent workability, cohesion, high bond strength, sag resistance, water resistance, efflorescence minimization, and durability. This product meets the requirements of ASTM C 270 and ASTM C 1714 for Type S mortars including ANSI A118.4 and ACI 530 shear bond stantards. TCC Materials also offers PMAVM with integral color.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Stone Veneer Mortar - Joint Grout

SPEC MIX® Stone Veneer Joint Grout (BOM #108404) is a blend of dry, cementitious materials, and masonry sand specifically designed to fill the joints between various precast, lightweight, masonry veneer systems. TCC Materials also offers SPEC MIX joint grout made with white cement and/or with integral color.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


TCC Materials® Masonry Cement

TCC Materials® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #100920) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM #100917) is designed for structural above-grade or below-grade application and comes in a 75 lb. bag. Type M Masonry Cement (BOM #100868) is used for structural, below-grade, load-bearing walls where higher compressive strengths are needed and comes in a 70 lb. bag.


TCC Materials® Stone Mortar Mix

TCC Materials® Stone Mortar Mix (BOM #109043) is a specially formulated product for use in applying precast masonry veneer, thin natural stone veneer or thin brick units to base surfaces. This versatile product may be used as an initial base coat for your project, then can be used in applying masonry veneer to the substrate. The material is factory blended to ensure bond strength, workability and consistency. To mix, just add water. Follow the stone installation instructions provided by the manufacturer. Available in a 60 lb. (27.2 kg) bag.


TCC Materials® Masonry Joint Grout

TCC Materials® Masonry Joint Grout (BOM #103491) can be used to grout joint spaces in and between artificial stone, brick, masonry, and natural stone. It is a preblended mixture of dry cementitious materials and masonry sand that is designed to fill joints between masonry veneer systems. This product can be used for interior or exterior applications. The product is preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in 60 lb. (27.2 kg) bag


TECH-MIX® Mortar Mix - Type N

TECH-MIX® Mortar Mix Type N (BOM #104881) is a specially formulated blend of sand, Portland cement, and hydrated lime for laying brick, block, and stone for all types of construction. Meets requirements of ASTM C270.


TECH-MIX® Mortar Mix - Type S

TECH-MIX® Mortar Mix Type S (BOM #104885) is a specially formulated blend of sand and Portland cement for laying brick, block, and stone on either load-bearing or non-load-bearing walls. Suitable for construction below grade.


QUIKRETE® Mortar Mix - Type N

QUIKRETE® Mortar Mix (BOM #100533) is a blend of masonry cement and graded sand, designed to meet ASTM C 270 for Type N Mortar. Just add water and mix to construct or repair block, brick, or stone structures like walls, pillars, barbecues, planters, and for tuck-pointing mortar joints.


QUIKRETE® Mason Mix

QUIKRETE® Mason Mix (BOM #106514) is a high strength Commercial Grade dry pre-blended mixture of sand and cements specially selected for masonry applications. Meets N, S, M requirements as specified in ASTM C270. Just add water. Also available in a 60 lb. bag (BOM #105673) at some locations.


QUIKRETE® Glass Block Mortar

QUIKRETE® Glass Block Mortar (BOM #100710) is a specifically formulated blend of white sand, cement, lime and other waterproof additives designed to provide a decorative, waterproof joint. Exceeds the performance requirements of ASTM C270 for Type S Mortar. Just add water.


Akona® White Glass Block Mortar

Akona® White Glass Block Mortar (BOM # 102627) is a specially-formulated blend of select white silica sands, white cement and workability agents which result in an easy-to-handle, high strength mortar. It is designed for installing glass block windows, shower and bath walls or masonry units where a white mortar is desired. This product is suitable for both interior and exterior applications.


SAKRETE® Mortar Mix Type N

SAKRETE® Mortar Mix Type N (BOM #100770) is a regular-strength, general-purpose mortar mix for laying brick, block and stone in wall construction or for repairing damaged mortar joints. Just add water, mix, and use.


SAKRETE® Mortar-Stucco Mix Type S

SAKRETE® Mortar-Stucco Mix Type S is a contractor-grade mortar mix for laying brick, block, and stone in load-bearing walls and construction above or below grade level. It can also be used as a scratch and brown coat in stucco application. Just add water, mix, and use. Available in 80 lb. bag (BOM #100531) and 50 lb. pail (BOM #120023)


SAKRETE® Stone Veneer Mortar Mix

SAKRETE® Stone Veneer Mortar Mix (BOM #105167) is a polymer-modified contractor grade mortar specifically designed to adhere manufactured or artificial stones in vertical applications. Just add water and mix to use.


ProSpec® Polymer-Modified Stone Veneer Base Coat

ProSpec® Polymer-Modified Stone Veneer Base Coat (BOM #120442) is used as a scratch and base coat for real or manufacatured stone veneer units. Also referred to as a cement plaster coating, it is a blend of cementitious materials, oven-dried masonry sand, and special performance admixtures designed to produce a highly-bondable substrate and to optimize consistency between batches. Special admixtures help create both a mechanical and chemical bond to the substrate with excellent workability and non-sag performance. Polymer-modified, mix with water only. "Step 1" of the ProSpec stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Can be applied over ProSpec Moisture Barrier or directly to fully cured concrete.


ProSpec® Heavy-Duty Stone Veneer Mortar

ProSpec® Heavy-Duty Stone Veneer Mortar (BOM #120444) is a high-yield, lightweight, high-performance, polymer-modified, fiber-reinforced, Portland-cement based mortar for adhered installation of masonry veneer stone and natural stone. 25% lighter than traditional mortars with excellent non-sag and non-slump handling characteristics. Special admixtures help create both a mechanical and chemical bond to the substrate, significantly outperforming standard mortars. ProSpec Heavy-Duty Stone Veneer Mortar is "Step 2" of the ProSpec stone installation system used to create decorative exterior and non-load bearing interior veneer walls.


ProSpec® Stone Veneer Joint Grout

ProSpec® Stone Veneer Joint Grout is a mixture of dry cementitious materials and masonry sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water only. "Step 3" of the ProSpec stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Available in 4 colors to compliment or contrast veneer units: Gray (BOM #120446); Brown (BOM #120449); Tan (BOM #120448); and White (BOM #120447).


ProSpec® PVT Masonry Veneer Mortar

ProSpec® PVT Masonry Veneer Mortar (BOM #120461) is a high-performance, multi-purpose, polymer-modified mortar, used for both traditional thick bed scratch and base coats and as the bonding mortar for installing real or manufactured masonry veneer units. A blend of cementitious materials, oven-dried masonry sand, and special performance admixtures, our Pro Veneer Technology (PVT) creates both a mechanical and chemical bond to the substrate, significantly outperforming standard Type S and N mortars. Can also be used for grouting, yet is excellent for applications such as dry stack where mortar joints are not used. Meets the requirements of ASTM C 1714, ASTM C270, ANSI 118.4, and ACI 530 Shear Bond Standards.


ProSpec® PVT Masonry Veneer Mortar HB

ProSpec® PVT Masonry Veneer Mortar HB (High-Bond) (BOM #120462) is a high-performance, non-sag, fiber-reinforced, polymer-modified bonding mortar for installing real or manufactured masonry veneer units. Our Pro Veneer Technology (PVT) is a blend of cementitious materials, oven-dried masonry sand, and special performance admixtures to create a professional strength mortar. This high-yield mortar allows for the same coverage as a traditional 50 lb. bag in a lighter-weight 40 lb. size. Meets or exceeds the requirements of ANSI A118.4, A118.11, A118.15 and ASTM C270.


ProSpec® PVT Masonry Veneer Joint Grout

ProSpec® PVT Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and masonry sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. ProSpec Pro Veneer Technology (PVT) creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466).


Akona® Refractory Mortar

Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQs, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.


ProSpec® Refractory Mortar

ProSpec® Refractory Mortar is a specially-engineered blend of specific cements and aggregates giving the mortar unique heat-resistance and thermal characteristics for use in high-temperature applications such as inside fire pit rings, setting chimney clay flue liners, parging a smoke chimney chamber, and setting fire bricks. Passes ASTM C 199 for mortar temperature limits to 2,550°F for a minimum of 6 hours. Available in 50 lb. bags (BOM #120924) and 10 lb. pails (BOM #120913).


 

 

SHARE