Grouts


Akona® Non-Shrink Grout (6,700 PSI)

Akona® Non-Shrink Grout (BOM #104953) is a pre-blended, pourable, non-metallic, Portland-cement based material used for grouting steel columns, bearing plates, precast concrete and anchors. Our Non-Shrink Grout compensates for an uneven foundation, distributes the weight of the unit, and prevents shifting after settling and leveling the unit. Akona Non-Shrink Grout is composed of aggregates, Portland cement and other additives to create an interior or exterior grout with non-shrinking characteristics capable of handling high-load transfers. Meets ASTM C1107 and is MN, WI, and NE DOT approved.


EverWhite 932

EverWhite is a three-component, 100% solids blend of epoxies and silica fillers specially formulated to retain its brilliant white coloring even during prolonged exposure to direct sunlight. It is to be used for the setting and grouting of ceramic tile and pavers over a wide variety of substrates. It produces a grout/mortar that is stain resistant, and high in strength and shock resistant. EverWhite has exceptionally high resistance to acids, alkalis and most solvents. EverWhite consists of one each of "A", "B", and "C" parts packaged in a mixing pail and is recommended for vertical wall applications only. Meets ANSI: ANSI A108.6 & A118.3


ProSpec® Non-Shrink Construction Grout 6000

ProSpec® Non-Shrink Construction Grout 6000 (BOM #120720) is a non-shrink, non-metallic, Portland cement based mixture of hydraulic cement, aggregate, and additives for general purpose structural grouting. Meets or exceeds ASTM C-1107.


ProSpec® Thermaseal® Geothermal Grout

ProSpec® Thermaseal® Geothermal Grout is a a thermally-conductive cementitious grout engineered for application of vertical and horizontal ground source heat pumps and geothermal well fields. Non-toxic and non-shrink with a high solids content and a low-permeability factor making it ideal for ground source heat loops and safe for contact with potable ground water. A blend of thermally-conductive sand with Portland cement for a target thermal conductivity standard of 1.0 BTU/hr-ft-F°. Thermaseal Geothermal Grout also offers low-absorption with a rigid seal to prevent integration of aquifers and is made in two versions, a MN Mix (BOM #104963) and HF (high-flow) (BOM #120699).


QUIKRETE® Fast Set™ Non-Shrink Grout

QUIKRETE® FastSet Non-Shrink Grout (BOM #109718) is designed for structural concrete repairs from ¼" to 24" deep and features a 30-minute set time, non-shrink characteristics and rapid strength gain. It can be mixed to a plastic, flowable or fluid consistency. Use for anchoring and grouting anchor bolts, bearing plates, pre-cast concrete keyways, or steel column bases. At a fluid consistency the compressive strength ASTM C109 reaches 2000 psi at 3 hours, 4000 psi at 24 hours, 5000 psi at 7 days, and 6500 psi at 28 days. At a flowable consistency the compressive strength ASTM C109 reaches 2500 psi at 3 hours, 4500 psi at 24 hours, 5500 psi at 7 days and 7500 at 28 days. At a plastic consistency the compressive strength reaches 3000 psi at 3 hours, 5000 psi at 24 hours, 6000 psi at 7 days and 8000 at 28 days. Exceeds ASTM C 928 R-3 and ASTM C 1107.


QUIKRETE® Precision Non-Shrink Grout

QUIKRETE® Non-Shrink Precision Grout (BOM #100713) is a high-strength, non-metallic grout designed for precision grouting and general construction applications. Simply add water and mix to obtain flowable properties and high strengths. Its non-shrink characteristics make it stable and capable of handling high load transfers. This grout can be mixed to a plastic, flowable or fluid consistency to for grouting pre-cast concrete, heavy equipment, bearing plates, steel columns, and anchoring applications. At 28 days the compressive strengths reach 14000 psi at a plastic consistency, 12000 psi at a flowable consistency, and 8000 psi at a fluid consistency. Complies with ASTM C1107 and Army Corp of Engineers CRD 621.


SAKRETE® Non-Shrink Construction Grout

SAKRETE® Non-Shrink Construction Grout (BOM #120024) is a non-shrink, non-metallic, Portland cement based material with special additives designed with high flexural and compressive strength to handle high-load transfers. Used for grouting of machinery bases, bearing plates, pre-cast concrete, columns, beams and other anchoring applications.


SAKRETE® Non-Shrink General Purpose Grout

SAKRETE® Non-Shrink General Purpose Grout (BOM #120025) is a commercial grade non-metallic Portland cement based structural hydraulic cement for high-strength grouting.


SPEC MIX® Corefill Masonry Grout - 3,000 PSI

SPEC MIX® Corefill Grout - 3,000 psi (BOM #106745) is dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction. TCC Materials also offers Corefill Grout with course sand (BOM #107236) or fine sand (BOM #103901).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Corefill Masonry Grout - 4,000 PSI

SPEC MIX® Corefill Grout - 4,000 psi (BOM #108576) is a dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Corefill Masonry Grout - 5,000 PSI

SPEC MIX® Corefill Grout - 5,000 psi (BOM #106903) is a dry, preblended mix containing cementitious materials and dried aggregates formulated for superior flow to fill masonry voids while meeting ASTM C 476 requirements for reinforced masonry construction.

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


SPEC MIX® Self-Consolidated Grout

SPEC MIX® Self-Consolidating Grout (SCG) (BOM #102863) is a dry, preblended grout specifically designed to be highly fluid without segregation of the constituents. SPEC MIX SCG is used to bond together adjacent masonry units, fill bond beams and occupy all areas around steel reinforcement in the cores of the masonry assemblage without mechanical consolidation or reconsolidation. Meets ASTM C 476 requirements for reinforced masonry construction. TCC Materials also offers SPEC MIX Self-Consolidating Grout as a fine mix (BOM #104381).

Also available in 3,000 bulk bags to work with our silo system. Please contact your salesperson for more information.


TCC Materials® Corefill Masonry Grout

TCC Materials® Corefill Masonry Grout (BOM #103501) is used to fill reinforced bond beams, to bond adjacent masonry units together, to bond steel reinforcement in the cores of masonry units and for filling masonry voids. Core Fill Masonry Grout is formulated for superior flow to fill masonry voids while meeting ASTM C476 requirements for reinforced masonry construction. Yields approximately ⅕ of a cubic foot of wet grout per 80 lb. (36.3 kg) bag. For concrete block this will fill about 4 cores in a 12" unit or about 5.5 cores in an 8" unit. Available in a 80 lb. (36.3 kg) bag.


TCC Materials® Thermaseal® C Geothermal Grout (MN Mix)

TCC Materials® Thermaseal® Cementitious Geothermal Grout is a thermally-conductive cementitious grout engineered for application of vertical and horizontal ground source heat pumps and geothermal well fields. This cementitious formulation is made with Portland cement, silica sand, and special admixtures designed to meet the thermal conductivity standards of 1.5-2.0 btu/ft-hr-°F. Thermaseal is non-toxic and safe for contact with potable ground water.


 

 

SHARE