Floor Preparation


Akona® Concrete Bonding Additive

Akona® Concrete Bonding Additive is an acrylic cement modifier that dramatically improves strength, adhesion, abrasion resistance and freeze-thaw resistance and is ideally suited for use with sand, mortar, cement mixes and selected Akona Repair Products. Akona Concrete Bonding Additive produces a patch that will adhere to old concrete and provides the adhesion required for thin overlays. Available in 1 gallon bottles (BOM #102659) and 1 quart bottles (BOM #102658).


Akona® Instant Patching Cement

Akona® Instant Patching Cement (BOM #102632) is a high-performance cement used for filling wide cracks and other concrete repair needs. It sets rock hard in just 90 minutes. Akona Instant Patching Cement self-bonds to all properly-prepared concrete surfaces and develops twice the strength of ordinary concrete.


Akona® Rapid Patch® Concrete Surface Repair

Akona® Rapid Patch® Concrete Surface Repair (BOM# 102896) is a high-strength, fast-setting, low-shrinkage patching material for commercial and industrial horizontal concrete surfaces. Concrete Surface Repair can also be used for concrete pavements, highway applications, concrete levelling and underlayments. Meets ASTM C928-R2. MN DOT approved under "Rapid Hardening Materials for Repairs".


Akona® Self-Leveling Floor Underlayment Cement

Akona® Self-Leveling Floor Underlayment Cement (BOM #104623) is a free-flowing mortar for use where a level surface is necessary prior to installing floor coverings. This ground-breaking formula has a dry, integral primer mixed so you no longer need to spend the additional money, time, and labor on adding an additional primer liquid. Our Self-Leveling Floor Underlayment Cement requires a minimum amount of labor to produce a smooth, level surface that is ready for installing floor coverings such as ceramic tile, marble, wood and carpet within 24 hours and resilient flooring after 72 hours. It is also ideal for encapsulate radiant heating installations. This product is designed for interior applications from ⅛" up to 1" thick.


Akonakote® Pourable Concrete Patch

Akonakote™ Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.


LevelCure Primer 943

LevelCure Primer (BOM #FTP-9431) is a high-quality emulsion polymer for self-leveling underlayments. A bonding agent and fortifying admixture, LevelCure Primer reduces water absorption associated with concrete to ensure a flowable mix.


ProSpec® Concrete Resurfacer

ProSpec® Concrete Resurfacer (BOM #120728) is a fast-setting, high-performance polymer-modified, cement-based product used for resurfacing old concrete to make it look new again. Applications from feather edge to ½ in. (2-13 mm). Fast-drying, walkable on average in 2 hours.


ProSpec® Feather Edge Pro

ProSpec® Feather Edge Pro (BOM #120540) is a trowelable, rapid-setting, polymer-modified, self-drying, Portland cement-based patch and skim coating compound for multiple interior substrates. Specially formulated with superior workability for easy application, this non-sanded product results in an ultra-smooth finish and can be applied from feather-edge to ½ in. (13 mm) and is ideal for use as an embossing leveler. Fast-setting, with initial set in 15 minutes; can accept ceramic tile and stone applications, as well as moisture-sensitive floor coverings, in as little as 30 minutes or when completly dry.


ProSpec® Feather Patch Pro

ProSpec® Feather Patch Pro is a fast-setting, polymer-modified, self-drying, Portland cement-based patch and skim coating compound for interior use under ceramic tile, hardwood flooring, carpet and a wide array of floor coverings. Ideal for deeper patching, this product can be applied from feather-edge to 2 in. (51 mm) thick. Formulated for exceptional bond strength and superior workability, can be applied to concrete with a relative humidity (RH) up to 90%. Rapid-setting, with initial set in 15 minutes; can accept ceramic tile and stone applications, as well as moisture-sensitive floor coverings, in as little as 30 minutes or when completely dry. Available in 10 lb. (4.5 kg) pails (BOM #120618), and 25 lb. (11.3 kg) pails (BOM #120541).


ProSpec® Level-Flo® Primer

ProSpec® Level-Flo® Primer is a high-quality, liquid-polymer latex for interior use with ProSpec Level-Flo self-leveling and concrete repair products. Applied to porous surfaces, this substrate primer reduces water absorption to ensure a flowable mix and promotes bonding. ProSpec Level-Flo Primer or Primer Pro are required to be applied to all substrates before placing ProSpec Level-Flo Underlayments or Wear-Toppings. Available in 1 gal. bottles (BOM #127201) and 5 gal. pails (BOM #127205).


ProSpec® Level-Flo® Underlayment 100

ProSpec® Level-Flo® Underlayment 100 (BOM #120534) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied from ⅛"-1½" (3-38 mm) neat and up to 5" (127 mm) extended.. Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings in 3 days. Use with ProSpec Level-Flo Primer or Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluable adhesive residue, and solid wood floors.


ProSpec® Level-Flo® Underlayment 200

ProSpec® Level-Flo® Underlayment 200 (BOM #120535) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floorcovering installation. Can be applied from ⅛"-2" (3-51mm) neat, and up to 5" (127 mm) extended. Fast-setting, accepts non-moisture sensitive tile and stone in as little as 4 hours, and moisture sensitive floorcoverings in 16-24 hours. Use with ProSpec Level-Flo Primer or Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluable adhesive residue, and solid wood floors.


ProSpec® Level-Flo® Underlayment 300

ProSpec® Level-Flo® Underlayment 300 (BOM #120536) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floorcovering installation. Designed for fast leveling of floors where increased strength is required; reaching 28-day ASTM C109 Compressive Strength of 6,000 psi. Can be applied from ⅛"-2" (3-51 mm) neat, and up to 5" (127 mm) extended. Fast-setting, accepts non-moisture sensitive tile and stone in as little as 3-4 hours, and moisture sensitive floorcoverings in 6 hours. Use with ProSpec Level-Flo Primer or Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluable adhesive residue, and solid wood floors.


ProSpec® Level-Flo® Underlayment 50

ProSpec® Level-Flo® Underlayment 50 (BOM #120585) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied as thick as 1" down to ⅛" (25-3 mm). Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings in 3 days. Excellent for encapusulating radiant heat systems. Use with ProSpec Level-Flo Primer or Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluable adhesive residue, and solid wood floors.


ProSpec® Mighty Bond™

ProSpec® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 5 gal. pails (BOM #120526) and 1 gal. bottles (BOM #120525).


ProSpec® Pourable Concrete Patch

ProSpec® Pourable Concrete Patch (BOM #120672) is a Portland cement-based, flowable, squeegee-grade, polymer-modified patching and resurfacing mix for interior and exterior horizontal concrete substrates. Easy to use, it corrects defects up to ½ in. (13 mm) on concrete surfaces prior to applying new flooring materials or coatings. Depending on application, can also be used as a wearable surface for residential and light duty commercial applications. Meets ASTM C387 “Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete” for normal weight concrete.


ProSpec® Tile Crete® Floor Mud

ProSpec® Tile Crete® Floor Mud is a blend of cementitious materials and oven dried sand developed to produce a water resistant and highly bondable substrate. Gray color is available in fine sand mix (BOM #105136), coarse sand mix (BOM #105154), and 50/50 mix (BOM #105141) Tile Crete is pre-blended and manufactured to optimize consistency from batch-to-batch. Simply add water and mix to create an easy to apply underlayment. Use as a setting bed/underlayment for ceramic, mosaic, quarry, and paver tile over concrete or wood subfloors and countertops. Tile Crete is also the ideal product for forming shower pans and curbs as well as installations requiring a slope to drain. Tile Crete Floor Mud also offers specialty mixes including a blend for exterior floor underlayments (BOM #105165), fast-setting floor underlayments (BOM #105178), fast-setting with fine sand (BOM #110513), and white cement with fine sand (BOM #100557). Contact your sales rep for more information.


ProSpec® Vinyl Concrete Patch

ProSpec® Vinyl Concrete Patch (BOM #120681)a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather-edge to 2 in. (51 mm) thick per lift. Typically supports foot traffic in 8-12 hours, wheeled traffic in 48 hours.


SAKRETE® Flo-Coat Concrete Resurfacer

SAKRETE® Flo-Coat Concrete Resurfacer (BOM #120034) is a polymer-modified sand and cement mix for resurfacing concrete from 1/8 inch to 1/4 inch depth. Can be applied in a flowable consistency using a squeegee or in a stiffer consistency using a trowel.


SAKRETE® Pourable Concrete Patch

SAKRETE® Pourable Concrete Patch (BOM #120037) is a flowable, squeegee-grade, polymer-modified mix for patching and resurfacing concrete up to ½ inch depth.


SAKRETE® Self-Leveling Underlayment

SAKRETE® Self-Leveling Underlayment (BOM #120035) is a polymer-modified Portland cement based self-leveling underlayment for interior applications up to 1 inch in a single pour. For use over properly prepared concrete and plywood floors. Can be used under ceramic tile, stone, carpeting, VCT, wood flooring and other materials. Not designed as a direct wearing surface. May also be used to encapsulate radiant heating installations.


SAKRETE® Top 'n Bond Concrete Patcher

SAKRETE® Top 'n Bond Concrete Patcher (BOM #120031 = 10 lb. / #120032 = 50 lb.) is a polymer-modified sand-cement repair mortar for resurfacing, patching, and general concrete repairs from ½ inch to featheredge. Requires only the addition of water.


Akona® Rapid Patch® Concrete Refinisher Pouch

Akona® Rapid Patch® Concrete Refinisher (BOM #104563) is a fast-setting patching material for concrete pavement, curbs, steps, block and all other interior or exterior concrete surfaces. The convenient zip-pouch package is designed with the do-it-yourselfer in mind for smaller repair projects. Just add water and mix in the bag to create a workable mixture with excellent bonding characteristics. Trowel apply over existing concrete surfaces from a feather edge to 2" thickness to fix minor blemishes. It can be shaved or molded to required shape. Use all the product at once, or take some out and save the rest for another project. And when you're done, our disposable, mix-in-the-bag package makes clean-up a breeze.


 

 

SHARE