DIY Specialty


Akona® Concrete Bonding Additive

Akona® Concrete Bonding Additive is an acrylic cement modifier that dramatically improves strength, adhesion, abrasion resistance and freeze-thaw resistance and is ideally suited for use with sand, mortar, cement mixes and selected Akona Repair Products. Akona Concrete Bonding Additive produces a patch that will adhere to old concrete and provides the adhesion required for thin overlays. Available in 1 gal. bottles (BOM #102659) and 1 qt. bottles (BOM #102658).


Akona® Epoxy Crack Repair

Akona® Epoxy Crack Repair (BOM #120439) is a two-component, high-strength, 100% solids, epoxy repair product designed for injection into horizontal cracks in structural materials including concrete and bricks for the purpose of bonding and sealing. Special no-mess, self-mixing tube for easier application. Use to fill and bond narrow horizontal cracks up to 1/4" (6 mm) wide x 6" (150 mm) deep. Dries clear to light yellow color.


Akona® Foundation Coating Cement

Akona® Foundation Coating Cement (BOM #102621) is a specially-formulated, cement-based product for coating and protecting polystyrene insulation board or insulated concrete forms (ICF) from weathering, ultraviolet rays, and general wear/impact. Akona Foundation Coating Cement is polymer-modified and contains fibers which reduces shrinkage and improves the adhesion properties of the product. Akona Foundation Coating Cement is easy to apply by masonry brush or trowel and has the superior durability of a Portland cement-based product. It also provides a tough, durable gray textured or stucco-like finish. If desired, the product may be integrally colored with a liquid cement or mortar colorant, or it can be painted to match existing home design.


Akona® Mortar Repair

Akona® Commercial Grade Mortar Repair (BOM #103174) is designed for tuck-pointing, repairing, and sealing mortar joints and cracks in masonry units such as stone, brick and block walls. The product is gray in color and designed to blend in with the texture of surrounding mortar. Our durable, pre-mixed Mortar Repair is a sanded, acrylic formulation that dries quickly, is paintable, and provides superior adhesion to masonry.


Akona® Polymer-Modified Concrete Resurfacer

Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength product has superior bond and is trowelable to from 1/4 in. down to 1/8 in. (6 to 3 mm). It may be trowel or broom finished, and is available in a 25 lb. bag (BOM #102642).


Akona® Pourable Gray Concrete Crack Filler

Akona® Gray Pourable Concrete Crack Filler is a ready-mixed, easy-to-apply, pourable material for filling cracks up to ¼" deep x ¼" wide. Gray in color to blend with concrete surfaces and flexible to conform to movements of active cracks, Concrete Crack Filler is ideal for horizontal concrete surface such as driveways, sidewalks, patios and garage floors. Available in 1 gal. bottles (BOM #102639) and 1 qt. bottles (BOM #102638). For larger cracks and holes, use Akona Vinyl Cement Patch.


Akona® Pre-Mixed Concrete & Stucco Patch

Akona® Pre-Mixed Concrete & Stucco Patch (BOM #103962) is a water-based formula intended to patch minor cracks, holes, and surface defects in concrete or stucco. Product may also be used for residential repairs of masonry walls and re-applying small broken pieces of concrete or tuck pointing brick mortar joints. Pre-Mixed Concrete & Stucco Patch offers superior adhesion and may be used for vertical or horizontal patches. 


Akona® White Glass Block Mortar

Akona® White Glass Block Mortar (BOM # 102627) is a specially-formulated blend of select white silica sands, white cement and workability agents which result in an easy-to-handle, high strength mortar. It is designed for installing glass block windows, shower and bath walls or masonry units where a white mortar is desired. This product is suitable for both interior and exterior applications.


ProSpec® Moisture Barrier

ProSpec® Moisture Barrier (BOM #127610) is an advanced, latex, polymer-based technology used as a water-resistant membrane applied to all wood or moisture-sensitive backup walls prior to application of ProSpec Polymer-Modified Stone Veneer Base Coat. Ready to use (no mixing required), with exceptional flexibility and elongation, solvent free and VOC compliant, ProSpec Moisture Barrier is part of the ProSpec veneer stone installation system. Color will be light purple when applied, dries to dark purple.


ProSpec® Polymer-Modified Stone Veneer Base Coat

ProSpec® Polymer-Modified Stone Veneer Base Coat (BOM #120442) is used as a scratch and base coat for real or manufactured stone veneer units. Also referred to as a cement plaster coating, it is a blend of cementitious materials, oven-dried masonry sand, and special performance admixtures designed to produce a highly-bondable substrate and to optimize consistency between batches. Special admixtures help create both a mechanical and chemical bond to the substrate with excellent workability and non-sag performance. Polymer-modified, mix with water only. "Step 1" of the ProSpec stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Can be applied over ProSpec Moisture Barrier or directly to fully cured concrete.


QUIKRETE® Glass Block Mortar

QUIKRETE® Glass Block Mortar (BOM #100710) is a specifically formulated blend of white sand, cement, lime and other waterproof additives designed to provide a decorative, waterproof joint. Exceeds the performance requirements of ASTM C270 for Type S Mortar. Just add water.


SAKRETE® Leak Stopper Hydraulic Cement

SAKRETE® Leak Stopper Hydraulic Cement (BOM #120030) stops the flow of water through breaks in concrete or masonry walls and floors. Rapid setting, with initial set-time of 1-3 minutes, and final set in 3-4 minutes.


TCC Materials® Countertop Mix

TCC Materials® Premium Concrete Countertop Mix™ is a fast-setting, high-strength countertop mix formulated for use in various precast projects. This product is ideally suited for countertops, outdoor kitchen tops, bar or table tops, precast wall caps, mantels or lintels. Because it is fiber reinforced with shinkage-reducing microfiber technology, this product is also ideal for workbenches and utility tops. Premium Countertop Mix just needs water to produce an easy-to-use, pourable mixture that can be de-molded in 18-24 hours. Available in a 50 lb. bag in gray (BOM #103434) or white (BOM #104082).


 

 

SHARE